saa7115: black image
I have an embedded platform with a Hauppage USB Live video capture dongle. I recently upgraded to 3.0.12 and now I get no image at all - a nice pure black is all I get.
I am sure that the dongle is getting a signal. This same hardware used to work with an older 2.6 kernel.
Partial lsmod:
root@anchor:/etc# lsmod Module Size Used by Not tainted saa7115 11296 0 usbvision 48704 0 v4l2_common 4336 2 saa7115,usbvision videodev 62768 3 saa7115,usbvision,v4l2_common i2c_core 12240 5 saa7115,usbvision,v4l2_common,videodev,i2c_dev
[ 33.640000] usbcore: registered new interface driver usb-storage [ 33.644000] USB Mass Storage support registered. [ 33.708000] Linux video capture interface: v2.00 [ 34.084000] usbvision_probe: Hauppauge WinTV USB Live Pro (NTSC M/N) found [ 34.092000] USBVision[0]: registered USBVision Video device video0 [v4l2] [ 34.100000] usbcore: registered new interface driver usbvision [ 34.104000] USBVision USB Video Device Driver for Linux : 0.9.10
and this shows up every time the device is opened:
[ 219.772000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (usbvision-3-1)
I can't help but think I am missing a module, or firmware, or something.... But with no messages to go on it's a bit of a mystery.
And yes, I've tried different inputs on the dongle; 0 is the composite in and 1 is the s-video. I'm using input 0.
Signature · 3 lines
Honoring our vets. http://www.bataanmarch.com/
Quoted 22 lines · Yan Seiner
I have an embedded platform with a Hauppage USB Live video capture dongle. I recently upgraded to 3.0.12 and now I get no image at all - a nice pure black is all I get.
I am sure that the dongle is getting a signal. This same hardware used to work with an older 2.6 kernel.
Partial lsmod:
root@anchor:/etc# lsmod Module Size Used by Not tainted saa7115 11296 0 usbvision 48704 0 v4l2_common 4336 2 saa7115,usbvision videodev 62768 3 saa7115,usbvision,v4l2_common i2c_core 12240 5 saa7115,usbvision,v4l2_common,videodev,i2c_dev[ 33.640000] usbcore: registered new interface driver usb-storage [ 33.644000] USB Mass Storage support registered. [ 33.708000] Linux video capture interface: v2.00 [ 34.084000] usbvision_probe: Hauppauge WinTV USB Live Pro (NTSC M/N) found [ 34.092000] USBVision[0]: registered USBVision Video device video0 [v4l2] [ 34.100000] usbcore: registered new interface driver usbvision [ 34.104000] USBVision USB Video Device Driver for Linux : 0.9.10
Quoted 8 lines
and this shows up every time the device is opened:
[ 219.772000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (usbvision-3-1)I can't help but think I am missing a module, or firmware, or something.... But with no messages to go on it's a bit of a mystery.
And yes, I've tried different inputs on the dongle; 0 is the composite in and 1 is the s-video. I'm using input 0.
Here's the verbose capture using fswebcam:
root@anchor:/lib/modules/3.0.12# fswebcam -v -c /etc/fswebcam Reading configuration from '/etc/fswebcam'... --- Opening /dev/video0... Trying source module v4l2... /dev/video0 opened. src_v4l2_get_capability,83: /dev/video0 information: src_v4l2_get_capability,84: cap.driver: "USBVision" src_v4l2_get_capability,85: cap.card: "Hauppauge WinTV USB Live Pro (N" src_v4l2_get_capability,86: cap.bus_info: "usb-0000:00:02.1-1" src_v4l2_get_capability,87: cap.capabilities=0x05020001 src_v4l2_get_capability,88: - VIDEO_CAPTURE src_v4l2_get_capability,95: - AUDIO src_v4l2_get_capability,97: - READWRITE src_v4l2_get_capability,99: - STREAMING src_v4l2_set_input,177: /dev/video0: Input 0 information: src_v4l2_set_input,178: name = "Composite Video Input" src_v4l2_set_input,179: type = 00000002 src_v4l2_set_input,181: - CAMERA src_v4l2_set_input,182: audioset = 00000000 src_v4l2_set_input,183: tuner = 00000000 src_v4l2_set_input,184: status = 00000000 src_v4l2_set_pix_format,537: Device offers the following V4L2 pixel formats: src_v4l2_set_pix_format,550: 0: [0x59455247] 'GREY' (GREY) src_v4l2_set_pix_format,550: 1: [0x50424752] 'RGBP' (RGB565) src_v4l2_set_pix_format,550: 2: [0x33424752] 'RGB3' (RGB24) src_v4l2_set_pix_format,550: 3: [0x34424752] 'RGB4' (RGB32) src_v4l2_set_pix_format,550: 4: [0x4F424752] 'RGBO' (RGB555) src_v4l2_set_pix_format,550: 5: [0x56595559] 'YUYV' (YUV422) src_v4l2_set_pix_format,550: 6: [0x32315659] 'YV12' (YUV420P) Using palette RGB32 Delaying 1 seconds. src_v4l2_set_mmap,689: mmap information: src_v4l2_set_mmap,690: frames=3 src_v4l2_set_mmap,737: 0 length=307200 src_v4l2_set_mmap,737: 1 length=307200 src_v4l2_set_mmap,737: 2 length=307200 --- Capturing frame... Skipping 5 frames... Capturing 1 frames... Captured 6 frames in 0.21 seconds. (28 fps) --- Processing captured image... Setting font to LiberationSans-Regular:10. Setting output format to JPEG, quality 95 Writing JPEG image to '/tmp/.tmp.jpg'. root@anchor:/lib/modules/3.0.12#
Signature · 3 lines
Honoring our vets. http://www.bataanmarch.com/
Quoted 3 lines · Yan Seiner
Quoted 2 lines · Yan Seiner
I have an embedded platform with a Hauppage USB Live video capture dongle. I recently upgraded to 3.0.12 and now I get no image at all
- a nice pure black is all I get.
OK, I get the bonehead of the weekend award. I'm getting a black image because.... drum roll please.... the power to the camera was off. Sorry to pollute the list with my boneheaded-ness. :-)
Signature · 3 lines
Honoring our vets. http://www.bataanmarch.com/