Skip to contentSkip to conversation

atmel_mci.h: remove outdated register macros

PATCH New Andreas Bießmann 1 participant 2 messages Mar 13, 2012 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 atmel_mci.h: remove outdated register macros

From: Andreas Bie?mann <[email protected]>

New gen_atmel_mci driver does not use the outated register access macros. Since the old atmel_mci driver is deleted these macros are no longer necessary.

---
 include/atmel_mci.h |   36 ------------------------------------
 1 files changed, 0 insertions(+), 36 deletions(-)
include/atmel_mci.h +0 -36
index 0158f97..3dd5d67 100644
@@ -56,30 +56,6 @@ typedef struct atmel_mci {
 
 #endif /* __ASSEMBLY__ */
 
-/*
- * NOTICE: Use of registers offsets is depreciated.
- * These defines will be removed once the old driver
- * is taken out of commision.
- *
- * Atmel MultiMedia Card Interface (MCI) registers
- */
-#define MMCI_CR					0x0000
-#define MMCI_MR					0x0004
-#define MMCI_DTOR				0x0008
-#define MMCI_SDCR				0x000c
-#define MMCI_ARGR				0x0010
-#define MMCI_CMDR				0x0014
-#define MMCI_RSPR				0x0020
-#define MMCI_RSPR1				0x0024
-#define MMCI_RSPR2				0x0028
-#define MMCI_RSPR3				0x002c
-#define MMCI_RDR				0x0030
-#define MMCI_TDR				0x0034
-#define MMCI_SR					0x0040
-#define MMCI_IER				0x0044
-#define MMCI_IDR				0x0048
-#define MMCI_IMR				0x004c
-
 /* Bitfields in CR */
 #define MMCI_MCIEN_OFFSET			0
 #define MMCI_MCIEN_SIZE				1
@@ -232,16 +208,4 @@ typedef struct atmel_mci {
 		    << MMCI_##name##_OFFSET))		\
 	 | MMCI_BF(name,value))
 
-/*
- * NOTICE: Use of registers offsets is depreciated.
- * These defines will be removed once the old driver
- * is taken out of commision.
- *
- * Register access macros
- */
-#define mmci_readl(reg)					\
-	readl((void *)ATMEL_BASE_MMCI + MMCI_##reg)
-#define mmci_writel(reg,value)				\
-	writel((value), (void *)ATMEL_BASE_MMCI + MMCI_##reg)
-
 #endif /* __ATMEL_MCI_H__ */
Signature · 1 line
1.7.9.1
#1 lore raw

PATCH 1/1 atmel_mci.h: remove outdated register macros

Quoted 6 lines · Andreas Bie?mann

From: Andreas Bie?mann <[email protected]>

New gen_atmel_mci driver does not use the outated register access macros. Since the old atmel_mci driver is deleted these macros are no longer necessary.

applied to u-boot-avr32