Skip to contentSkip to conversation

ARM: EXYNOS: add support new EXYNOS5250

PATCH Superseded Kukjin Kim 4 participants 23 messages Mar 14, 2012 – Mar 29, 2012

Subsystems (4)
lore
Share & tools
lore

Kukjin Kim

author
#0 lore raw

v4 cover ARM: EXYNOS: add support new EXYNOS5250

This patch adds support EXYNOS5250 SoC which has two A15 cores can be used on mobile and tablet devices.

Changes since v3:
- fix external interrupt number
- use local helper function instead of irq_to_gpio()
- fix and expand commit descriptions
- update dts file

Changes since v2:
- update interrupt number declaration for single zImage of exynos4 and exynos5
- allow to select for exynos4 and exynos5 together
- add support EINT for exynos4 and exynos5
- add l2 cache initializer for exynos5250

Changes since v1:
- address comments from mailing list
- update the option accordingly common.[ch]
- update clock part
- get rid of static mapping for uart
- add device tree enabled board file(mach-exynos5-dt.c)
- add initial dts file for EXYNOS5250(SoC), SMDK5250(Board)

[PATCH v4 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c [PATCH v4 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts() [PATCH v4 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC
[PATCH v4 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5
[PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5 [PATCH v4 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC
[PATCH v4 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250 [PATCH v4 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5 [PATCH v4 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250 [PATCH v4 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5 [PATCH v4 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250

author
#1 lore raw

PATCH v4 1/12 ARM: EXYNOS: to declare static for mach-exynos/common.c

According to commit cc511b8d84d8 ("ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]"), we don't need to declare extern for exynos4_map_io(), exynos4_init_clocks(), exynos4_init_uarts(), and exynos_init(). And the exynos4210_register_clocks() and exynos4212_register_clocks depend on each SoC not ARCH_EXYNOS4. So this patch fixed above.

---
 arch/arm/mach-exynos/common.c |   13 +++++++++----
 arch/arm/mach-exynos/common.h |   28 +++++++++++-----------------
 2 files changed, 20 insertions(+), 21 deletions(-)
arch/arm/mach-exynos/common.c +9 -4
index 34e8190..a1f8a99 100644
@@ -50,6 +50,11 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
 
+static void exynos4_map_io(void);
+static void exynos4_init_clocks(int xtal);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static int exynos_init(void);
+
 static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= EXYNOS4210_CPU_ID,
@@ -225,7 +230,7 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size)
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
-void __init exynos4_map_io(void)
+static void __init exynos4_map_io(void)
 {
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
@@ -256,7 +261,7 @@ void __init exynos4_map_io(void)
 	s5p_hdmi_setname("exynos4-hdmi");
 }
 
-void __init exynos4_init_clocks(int xtal)
+static void __init exynos4_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
 
@@ -456,7 +461,7 @@ static int __init exynos4_l2x0_cache_init(void)
 early_initcall(exynos4_l2x0_cache_init);
 #endif
 
-int __init exynos_init(void)
+static int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 	return device_register(&exynos4_dev);
@@ -464,7 +469,7 @@ int __init exynos_init(void)
 
 /* uart registration process */
 
-void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	struct s3c2410_uartcfg *tcfg = cfg;
 	u32 ucnt;
arch/arm/mach-exynos/common.h +11 -17
index 8c1efe6..b32c6b5 100644
@@ -12,39 +12,33 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
+extern struct sys_timer exynos4_timer;
+
 void exynos_init_io(struct map_desc *mach_desc, int size);
 void exynos4_init_irq(void);
+void exynos4_restart(char mode, const char *cmd);
 
 #ifdef CONFIG_ARCH_EXYNOS4
 void exynos4_register_clocks(void);
 void exynos4_setup_clocks(void);
 
-void exynos4210_register_clocks(void);
-void exynos4212_register_clocks(void);
-
 #else
 #define exynos4_register_clocks()
 #define exynos4_setup_clocks()
-
-#define exynos4210_register_clocks()
-#define exynos4212_register_clocks()
 #endif
 
-void exynos4_restart(char mode, const char *cmd);
+#ifdef CONFIG_CPU_EXYNOS4210
+void exynos4210_register_clocks(void);
 
-extern struct sys_timer exynos4_timer;
+#else
+#define exynos4210_register_clocks()
+#endif
 
-#ifdef CONFIG_ARCH_EXYNOS
-extern  int exynos_init(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#ifdef CONFIG_SOC_EXYNOS4212
+void exynos4212_register_clocks(void);
 
 #else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
+#define exynos4212_register_clocks()
 #endif
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
Signature · 1 line
1.7.4.4
author
#2 lore raw

PATCH v4 2/12 ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()

In reply to Kukjin Kim

Since exynos4_init_uarts() can be used for EXYNOS5 SoCs, this patch changes the name of function to exynos_init_uarts().

---
 arch/arm/mach-exynos/common.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/mach-exynos/common.c +5 -5
index a1f8a99..02eed29 100644
@@ -52,7 +52,7 @@ static const char name_exynos4412[] = "EXYNOS4412";
 
 static void exynos4_map_io(void);
 static void exynos4_init_clocks(int xtal);
-static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 static int exynos_init(void);
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -61,7 +61,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
+		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4210,
 	}, {
@@ -69,7 +69,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
+		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4212,
 	}, {
@@ -77,7 +77,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
+		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4412,
 	},
@@ -469,7 +469,7 @@ static int __init exynos_init(void)
 
 /* uart registration process */
 
-static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	struct s3c2410_uartcfg *tcfg = cfg;
 	u32 ucnt;
Signature · 1 line
1.7.4.4
author
#3 lore raw

PATCH v4 3/12 ARM: EXYNOS: add clock part for EXYNOS5250 SoC

In reply to Kukjin Kim

This patch adds clock-exynos5.c for EXYNOS5250 now and that can be used for other EXYNOS5 SoCs later.

---
 arch/arm/mach-exynos/clock-exynos5.c           | 1247 ++++++++++++++++++++++++
 arch/arm/mach-exynos/include/mach/regs-clock.h |   62 ++
 arch/arm/plat-s5p/clock.c                      |   36 +
 arch/arm/plat-samsung/include/plat/s5p-clock.h |    6 +
 4 files changed, 1351 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-exynos/clock-exynos5.c
arch/arm/mach-exynos/clock-exynos5.c new file +1247 -0
new file mode 100644
index 0000000..d013982
@@ -0,0 +1,1247 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Clock support for EXYNOS5 SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos5_clock_save[] = {
+	/* will be implemented */
+};
+#endif
+
+static struct clk exynos5_clk_sclk_dptxphy = {
+	.name		= "sclk_dptx",
+};
+
+static struct clk exynos5_clk_sclk_hdmi24m = {
+	.name		= "sclk_hdmi24m",
+	.rate		= 24000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmi27m = {
+	.name		= "sclk_hdmi27m",
+	.rate		= 27000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmiphy = {
+	.name		= "sclk_hdmiphy",
+};
+
+static struct clk exynos5_clk_sclk_usbphy = {
+	.name		= "sclk_usbphy",
+	.rate		= 48000000,
+};
+
+static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
+}
+
+static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
+}
+
+static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
+}
+
+static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
+}
+
+static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
+}
+
+static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
+}
+
+static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
+}
+
+static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
+}
+
+static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
+}
+
+static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos5_clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+	},
+	.sources = &clk_src_apll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_apll = {
+	.clk	= {
+		.name		= "sclk_apll",
+		.parent		= &exynos5_clk_mout_apll.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll = {
+	.clk	= {
+		.name		= "mout_bpll",
+	},
+	.sources = &clk_src_bpll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll_user = {
+	.sources	= exynos5_clk_src_bpll_user_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll_user = {
+	.clk	= {
+		.name		= "mout_bpll_user",
+	},
+	.sources = &exynos5_clk_src_bpll_user,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpll = {
+	.clk	= {
+		.name		= "mout_cpll",
+	},
+	.sources = &clk_src_cpll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+	},
+	.sources = &clk_src_epll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
+};
+
+struct clksrc_clk exynos5_clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+	},
+	.sources = &clk_src_mpll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
+};
+
+static struct clk *exynos_clkset_vpllsrc_list[] = {
+	[0] = &clk_fin_vpll,
+	[1] = &exynos5_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos5_clkset_vpllsrc = {
+	.sources	= exynos_clkset_vpllsrc_list,
+	.nr_sources	= ARRAY_SIZE(exynos_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos5_clk_vpllsrc = {
+	.clk	= {
+		.name		= "vpll_src",
+		.enable		= exynos5_clksrc_mask_top_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &exynos5_clkset_vpllsrc,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_sclk_vpll_list[] = {
+	[0] = &exynos5_clk_vpllsrc.clk,
+	[1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_vpll = {
+	.sources	= exynos5_clkset_sclk_vpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_vpll = {
+	.clk	= {
+		.name		= "sclk_vpll",
+	},
+	.sources = &exynos5_clkset_sclk_vpll,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_pixel = {
+	.clk	= {
+		.name		= "sclk_pixel",
+		.parent		= &exynos5_clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
+};
+
+static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
+	[0] = &exynos5_clk_sclk_pixel.clk,
+	[1] = &exynos5_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
+	.sources	= exynos5_clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_hdmi = {
+	.clk	= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
+		.ctrlbit	= (1 << 20),
+	},
+	.sources = &exynos5_clkset_sclk_hdmi,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
+};
+
+static struct clksrc_clk *exynos5_sclk_tv[] = {
+	&exynos5_clk_sclk_pixel,
+	&exynos5_clk_sclk_hdmi,
+};
+
+static struct clk *exynos5_clk_src_mpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll_user = {
+	.sources	= exynos5_clk_src_mpll_user_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_mpll_user = {
+	.clk	= {
+		.name		= "mout_mpll_user",
+	},
+	.sources = &exynos5_clk_src_mpll_user,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_mout_cpu_list[] = {
+	[0] = &exynos5_clk_mout_apll.clk,
+	[1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_mout_cpu = {
+	.sources	= exynos5_clkset_mout_cpu_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpu = {
+	.clk	= {
+		.name		= "mout_cpu",
+	},
+	.sources = &exynos5_clkset_mout_cpu,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_armclk = {
+	.clk	= {
+		.name		= "dout_armclk",
+		.parent		= &exynos5_clk_mout_cpu.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_arm2clk = {
+	.clk	= {
+		.name		= "dout_arm2clk",
+		.parent		= &exynos5_clk_dout_armclk.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
+};
+
+static struct clk exynos5_clk_armclk = {
+	.name		= "armclk",
+	.parent		= &exynos5_clk_dout_arm2clk.clk,
+};
+
+/* Core list of CMU_CDREX side */
+
+static struct clk *exynos5_clkset_cdrex_list[] = {
+	[0] = &exynos5_clk_mout_mpll.clk,
+	[1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_cdrex = {
+	.sources	= exynos5_clkset_cdrex_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_cdrex_list),
+};
+
+static struct clksrc_clk exynos5_clk_cdrex = {
+	.clk	= {
+		.name		= "clk_cdrex",
+	},
+	.sources = &exynos5_clkset_cdrex,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_acp = {
+	.clk	= {
+		.name		= "aclk_acp",
+		.parent		= &exynos5_clk_mout_mpll.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_pclk_acp = {
+	.clk	= {
+		.name		= "pclk_acp",
+		.parent		= &exynos5_clk_aclk_acp.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos5_clkset_aclk_top_list[] = {
+	[0] = &exynos5_clk_mout_mpll_user.clk,
+	[1] = &exynos5_clk_mout_bpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk = {
+	.sources	= exynos5_clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_400 = {
+	.clk	= {
+		.name		= "aclk_400",
+	},
+	.sources = &exynos5_clkset_aclk,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+};
+
+struct clk *exynos5_clkset_aclk_333_166_list[] = {
+	[0] = &exynos5_clk_mout_cpll.clk,
+	[1] = &exynos5_clk_mout_mpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+	.sources	= exynos5_clkset_aclk_333_166_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_333 = {
+	.clk	= {
+		.name		= "aclk_333",
+	},
+	.sources = &exynos5_clkset_aclk_333_166,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_166 = {
+	.clk	= {
+		.name		= "aclk_166",
+	},
+	.sources = &exynos5_clkset_aclk_333_166,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_266 = {
+	.clk	= {
+		.name		= "aclk_266",
+		.parent		= &exynos5_clk_mout_mpll_user.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_200 = {
+	.clk	= {
+		.name		= "aclk_200",
+	},
+	.sources = &exynos5_clkset_aclk,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66_pre = {
+	.clk	= {
+		.name		= "aclk_66_pre",
+		.parent		= &exynos5_clk_mout_mpll_user.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66 = {
+	.clk	= {
+		.name		= "aclk_66",
+		.parent		= &exynos5_clk_aclk_66_pre.clk,
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
+};
+
+static struct clk exynos5_init_clocks_off[] = {
+	{
+		.name		= "timers",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "rtc",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &exynos5_clk_aclk_200.clk,
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
+		.parent		= &exynos5_clk_aclk_200.clk,
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.2",
+		.parent		= &exynos5_clk_aclk_200.clk,
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 14),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.3",
+		.parent		= &exynos5_clk_aclk_200.clk,
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "dwmci",
+		.parent		= &exynos5_clk_aclk_200.clk,
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "sata",
+		.devname	= "ahci",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "sata_phy",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "sata_phy_i2c",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "mfc",
+		.devname	= "s5p-mfc",
+		.enable		= exynos5_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos5_clk_ip_disp1_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos5_clk_ip_disp1_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "jpeg",
+		.enable		= exynos5_clk_ip_gen_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "dsim0",
+		.enable		= exynos5_clk_ip_disp1_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.1",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.2",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.1",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.2",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "spdif",
+		.devname	= "samsung-spdif",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "ac97",
+		.devname	= "samsung-ac97",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "usbhost",
+		.enable		= exynos5_clk_ip_fsys_ctrl ,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "usbotg",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "gps",
+		.enable		= exynos5_clk_ip_gps_ctrl,
+		.ctrlbit	= ((1 << 3) | (1 << 2) | (1 << 0)),
+	}, {
+		.name		= "nfcon",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "iop",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= ((1 << 30) | (1 << 26) | (1 << 23)),
+	}, {
+		.name		= "core_iop",
+		.enable		= exynos5_clk_ip_core_ctrl,
+		.ctrlbit	= ((1 << 21) | (1 << 3)),
+	}, {
+		.name		= "mcu_iop",
+		.enable		= exynos5_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.0",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.1",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.2",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.3",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.4",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.5",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.6",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.7",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 14),
+	}
+};
+
+static struct clk exynos5_init_clocks_on[] = {
+	{
+		.name		= "uart",
+		.devname	= "s5pv210-uart.0",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "uart",
+		.devname	= "s5pv210-uart.1",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.devname	= "s5pv210-uart.2",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.devname	= "s5pv210-uart.3",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.devname	= "s5pv210-uart.4",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "uart",
+		.devname	= "s5pv210-uart.5",
+		.enable		= exynos5_clk_ip_peric_ctrl,
+		.ctrlbit	= (1 << 5),
+	}
+};
+
+static struct clk exynos5_clk_pdma0 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.0",
+	.enable		= exynos5_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 1),
+};
+
+static struct clk exynos5_clk_pdma1 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.1",
+	.enable		= exynos5_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 1),
+};
+
+static struct clk exynos5_clk_mdma1 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.2",
+	.enable		= exynos5_clk_ip_gen_ctrl,
+	.ctrlbit	= (1 << 4),
+};
+
+struct clk *exynos5_clkset_group_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = NULL,
+	[2] = &exynos5_clk_sclk_hdmi24m,
+	[3] = &exynos5_clk_sclk_dptxphy,
+	[4] = &exynos5_clk_sclk_usbphy,
+	[5] = &exynos5_clk_sclk_hdmiphy,
+	[6] = &exynos5_clk_mout_mpll_user.clk,
+	[7] = &exynos5_clk_mout_epll.clk,
+	[8] = &exynos5_clk_sclk_vpll.clk,
+	[9] = &exynos5_clk_mout_cpll.clk,
+};
+
+struct clksrc_sources exynos5_clkset_group = {
+	.sources	= exynos5_clkset_group_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_group_list),
+};
+
+/* Possible clock sources for aclk_266_gscl_sub Mux */
+static struct clk *clk_src_gscl_266_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &exynos5_clk_aclk_266.clk,
+};
+
+static struct clksrc_sources clk_src_gscl_266 = {
+	.sources	= clk_src_gscl_266_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_gscl_266_list),
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc0 = {
+	.clk		= {
+		.name		= "dout_mmc0",
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc1 = {
+	.clk		= {
+		.name		= "dout_mmc1",
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc2 = {
+	.clk		= {
+		.name		= "dout_mmc2",
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc3 = {
+	.clk		= {
+		.name		= "dout_mmc3",
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc4 = {
+	.clk		= {
+		.name		= "dout_mmc4",
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart0 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.0",
+		.enable		= exynos5_clksrc_mask_peric0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.1",
+		.enable		= exynos5_clksrc_mask_peric0_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart2 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.2",
+		.enable		= exynos5_clksrc_mask_peric0_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart3 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.3",
+		.enable		= exynos5_clksrc_mask_peric0_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &exynos5_clk_dout_mmc0.clk,
+		.enable		= exynos5_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.1",
+		.parent		= &exynos5_clk_dout_mmc1.clk,
+		.enable		= exynos5_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.2",
+		.parent		= &exynos5_clk_dout_mmc2.clk,
+		.enable		= exynos5_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.3",
+		.parent		= &exynos5_clk_dout_mmc3.clk,
+		.enable		= exynos5_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_dwmci",
+			.parent		= &exynos5_clk_dout_mmc4.clk,
+			.enable		= exynos5_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimd",
+			.devname	= "s3cfb.1",
+			.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &exynos5_clkset_group,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "aclk_266_gscl",
+		},
+		.sources = &clk_src_gscl_266,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
+	}, {
+		.clk	= {
+			.name		= "sclk_g3d",
+			.devname	= "mali-t604.0",
+			.enable		= exynos5_clk_block_ctrl,
+			.ctrlbit	= (1 << 1),
+		},
+		.sources = &exynos5_clkset_aclk,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "sclk_gscl_wrap",
+			.devname	= "s5p-mipi-csis.0",
+			.enable		= exynos5_clksrc_mask_gscl_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &exynos5_clkset_group,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_gscl_wrap",
+			.devname	= "s5p-mipi-csis.1",
+			.enable		= exynos5_clksrc_mask_gscl_ctrl,
+			.ctrlbit	= (1 << 28),
+		},
+		.sources = &exynos5_clkset_group,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_cam0",
+			.enable		= exynos5_clksrc_mask_gscl_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &exynos5_clkset_group,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_cam1",
+			.enable		= exynos5_clksrc_mask_gscl_ctrl,
+			.ctrlbit	= (1 << 20),
+		},
+		.sources = &exynos5_clkset_group,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_jpeg",
+			.parent		= &exynos5_clk_mout_cpll.clk,
+		},
+		.reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos5_sysclks[] = {
+	&exynos5_clk_mout_apll,
+	&exynos5_clk_sclk_apll,
+	&exynos5_clk_mout_bpll,
+	&exynos5_clk_mout_bpll_user,
+	&exynos5_clk_mout_cpll,
+	&exynos5_clk_mout_epll,
+	&exynos5_clk_mout_mpll,
+	&exynos5_clk_mout_mpll_user,
+	&exynos5_clk_vpllsrc,
+	&exynos5_clk_sclk_vpll,
+	&exynos5_clk_mout_cpu,
+	&exynos5_clk_dout_armclk,
+	&exynos5_clk_dout_arm2clk,
+	&exynos5_clk_cdrex,
+	&exynos5_clk_aclk_400,
+	&exynos5_clk_aclk_333,
+	&exynos5_clk_aclk_266,
+	&exynos5_clk_aclk_200,
+	&exynos5_clk_aclk_166,
+	&exynos5_clk_aclk_66_pre,
+	&exynos5_clk_aclk_66,
+	&exynos5_clk_dout_mmc0,
+	&exynos5_clk_dout_mmc1,
+	&exynos5_clk_dout_mmc2,
+	&exynos5_clk_dout_mmc3,
+	&exynos5_clk_dout_mmc4,
+	&exynos5_clk_aclk_acp,
+	&exynos5_clk_pclk_acp,
+};
+
+static struct clk *exynos5_clk_cdev[] = {
+	&exynos5_clk_pdma0,
+	&exynos5_clk_pdma1,
+	&exynos5_clk_mdma1,
+};
+
+static struct clksrc_clk *exynos5_clksrc_cdev[] = {
+	&exynos5_clk_sclk_uart0,
+	&exynos5_clk_sclk_uart1,
+	&exynos5_clk_sclk_uart2,
+	&exynos5_clk_sclk_uart3,
+	&exynos5_clk_sclk_mmc0,
+	&exynos5_clk_sclk_mmc1,
+	&exynos5_clk_sclk_mmc2,
+	&exynos5_clk_sclk_mmc3,
+};
+
+static struct clk_lookup exynos5_clk_lookup[] = {
+	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
+	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
+	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
+	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
+	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+};
+
+static unsigned long exynos5_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static struct clk *exynos5_clks[] __initdata = {
+	&exynos5_clk_sclk_hdmi27m,
+	&exynos5_clk_sclk_hdmiphy,
+	&clk_fout_bpll,
+	&clk_fout_cpll,
+	&exynos5_clk_armclk,
+};
+
+static u32 epll_div[][6] = {
+	{ 192000000, 0, 48, 3, 1, 0 },
+	{ 180000000, 0, 45, 3, 1, 0 },
+	{  73728000, 1, 73, 3, 3, 47710 },
+	{  67737600, 1, 90, 4, 3, 20762 },
+	{  49152000, 0, 49, 3, 3, 9961 },
+	{  45158400, 0, 45, 3, 3, 10381 },
+	{ 180633600, 0, 45, 3, 1, 10381 },
+};
+
+static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+	unsigned int tmp;
+	unsigned int epll_rate;
+	unsigned int locktime;
+	unsigned int lockcnt;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	if (clk->parent)
+		epll_rate = clk_get_rate(clk->parent);
+	else
+		epll_rate = clk_ext_xtal_mux.rate;
+
+	if (epll_rate != 24000000) {
+		pr_err("Invalid Clock : recommended clock is 24MHz.\n");
+		return -EINVAL;
+	}
+
+	epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
+	epll_con &= ~(0x1 << 27 | \
+			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |   \
+			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		if (epll_div[i][0] == rate) {
+			epll_con_k = epll_div[i][5] << 0;
+			epll_con |= epll_div[i][1] << 27;
+			epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
+			epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	epll_rate /= 1000000;
+
+	/* 3000 max_cycls : specification data */
+	locktime = 3000 / epll_rate * epll_div[i][3];
+	lockcnt = locktime * 10000 / (10000 / epll_rate);
+
+	__raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
+
+	__raw_writel(epll_con, EXYNOS5_EPLL_CON0);
+	__raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
+
+	do {
+		tmp = __raw_readl(EXYNOS5_EPLL_CON0);
+	} while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops exynos5_epll_ops = {
+	.get_rate = exynos5_epll_get_rate,
+	.set_rate = exynos5_epll_set_rate,
+};
+
+static int xtal_rate;
+
+static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
+{
+	return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
+}
+
+static struct clk_ops exynos5_fout_apll_ops = {
+	.get_rate = exynos5_fout_apll_get_rate,
+};
+
+#ifdef CONFIG_PM
+static int exynos5_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+
+	return 0;
+}
+
+static void exynos5_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+}
+#else
+#define exynos5_clock_suspend NULL
+#define exynos5_clock_resume NULL
+#endif
+
+struct syscore_ops exynos5_clock_syscore_ops = {
+	.suspend	= exynos5_clock_suspend,
+	.resume		= exynos5_clock_resume,
+};
+
+void __init_or_cpufreq exynos5_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long apll;
+	unsigned long bpll;
+	unsigned long cpll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long vpll;
+	unsigned long vpllsrc;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long mout_cdrex;
+	unsigned long aclk_400;
+	unsigned long aclk_333;
+	unsigned long aclk_266;
+	unsigned long aclk_200;
+	unsigned long aclk_166;
+	unsigned long aclk_66;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+
+	xtal_rate = xtal;
+
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
+	bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
+	cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
+	mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
+	epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
+			__raw_readl(EXYNOS5_EPLL_CON1));
+
+	vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
+	vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
+			__raw_readl(EXYNOS5_VPLL_CON1));
+
+	clk_fout_apll.ops = &exynos5_fout_apll_ops;
+	clk_fout_bpll.rate = bpll;
+	clk_fout_cpll.rate = cpll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_vpll.rate = vpll;
+
+	printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
+			"M=%ld, E=%ld V=%ld",
+			apll, bpll, cpll, mpll, epll, vpll);
+
+	armclk = clk_get_rate(&exynos5_clk_armclk);
+	mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
+
+	aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
+	aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
+	aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
+	aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
+	aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
+	aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
+
+	printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
+			"ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
+			"ACLK166=%ld, ACLK66=%ld\n",
+			armclk, mout_cdrex, aclk_400,
+			aclk_333, aclk_266, aclk_200,
+			aclk_166, aclk_66);
+
+
+	clk_fout_epll.ops = &exynos5_epll_ops;
+
+	if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
+		printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
+				clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
+
+	clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
+	clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
+
+	clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
+	clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
+		s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
+}
+
+void __init exynos5_register_clocks(void)
+{
+	int ptr;
+
+	s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
+		s3c_register_clksrc(exynos5_sysclks[ptr], 1);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
+		s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
+		s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
+
+	s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
+	s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
+
+	s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
+	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
+		s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
+
+	s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+	s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+	clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
+
+	register_syscore_ops(&exynos5_clock_syscore_ops);
+	s3c_pwmclk_init();
+}
arch/arm/mach-exynos/include/mach/regs-clock.h +62 -0

68 lines not on this page · raw message

arch/arm/plat-s5p/clock.c +36 -0
index 963edea..f68a9bb 100644
@@ -61,6 +61,20 @@ struct clk clk_fout_apll = {
 	.id		= -1,
 };
 
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+	.name		= "fout_bpll",
+	.id		= -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+	.name		= "fout_cpll",
+	.id		= -1,
+};
+
 /* MPLL clock output
  * No need .ctrlbit, this is always on
 */
@@ -101,6 +115,28 @@ struct clksrc_sources clk_src_apll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
 
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+	.sources	= clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+	[0] = &clk_fin_cpll,
+	[1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+	.sources	= clk_src_cpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_cpll_list),
+};
+
 /* Possible clock sources for MPLL Mux */
 static struct clk *clk_src_mpll_list[] = {
 	[0] = &clk_fin_mpll,
arch/arm/plat-samsung/include/plat/s5p-clock.h +6 -0
index 984bf9e..1de4b32 100644
@@ -18,6 +18,8 @@
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
 #define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_bpll clk_ext_xtal_mux
+#define clk_fin_cpll clk_ext_xtal_mux
 #define clk_fin_mpll clk_ext_xtal_mux
 #define clk_fin_epll clk_ext_xtal_mux
 #define clk_fin_dpll clk_ext_xtal_mux
@@ -29,6 +31,8 @@ extern struct clk clk_xusbxti;
 extern struct clk clk_48m;
 extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
+extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_cpll;
 extern struct clk clk_fout_mpll;
 extern struct clk clk_fout_epll;
 extern struct clk clk_fout_dpll;
@@ -37,6 +41,8 @@ extern struct clk clk_arm;
 extern struct clk clk_vpll;
 
 extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_cpll;
 extern struct clksrc_sources clk_src_mpll;
 extern struct clksrc_sources clk_src_epll;
 extern struct clksrc_sources clk_src_dpll;
Signature · 1 line
1.7.4.4
author
#4 lore raw

PATCH v4 4/12 ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5

In reply to Kukjin Kim

In all of Samsung platform, the setup-i2c0.c file for I2C channel 0 is always compiled. So when supporting new SoC,it should be updated for it. Since EXYNOS5 GPIO will be supported after this, there is no setup gpio in there now. It will be implemented with that, of course.

---
 arch/arm/mach-exynos/Makefile     |    2 +-
 arch/arm/mach-exynos/setup-i2c0.c |    9 ++++++---
 2 files changed, 7 insertions(+), 4 deletions(-)
arch/arm/mach-exynos/Makefile +1 -1
index 995e7cc..2117f02 100644
@@ -52,7 +52,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
 
-obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
arch/arm/mach-exynos/setup-i2c0.c +6 -3
index d395bd1..b90d94c 100644
@@ -1,7 +1,5 @@
 /*
- * linux/arch/arm/mach-exynos4/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * I2C0 GPIO configuration.
@@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */
 #include <linux/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
+	if (soc_is_exynos5250())
+		/* will be implemented with gpio function */
+		return;
+
 	s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
 			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
Signature · 1 line
1.7.4.4
author
#5 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

In reply to Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---
 arch/arm/mach-exynos/Makefile                   |    1 +
 arch/arm/mach-exynos/common.c                   |    5 +-
 arch/arm/mach-exynos/dev-uart.c                 |   78 +++++++++++++++++++++++
 arch/arm/mach-exynos/include/mach/debug-macro.S |    9 ++-
 arch/arm/mach-exynos/include/mach/irqs.h        |   12 ++++
 arch/arm/mach-exynos/include/mach/map.h         |   20 +++---
 arch/arm/mach-exynos/include/mach/uncompress.h  |   17 ++++--
 arch/arm/plat-s5p/Kconfig                       |    4 +
 arch/arm/plat-s5p/Makefile                      |    3 +-
 arch/arm/plat-samsung/include/plat/devs.h       |    2 +
 arch/arm/plat-samsung/include/plat/uncompress.h |    2 +
 11 files changed, 135 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/mach-exynos/dev-uart.c
arch/arm/mach-exynos/Makefile +1 -0
index 2117f02..f8a3770 100644
@@ -44,6 +44,7 @@ obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
 
 # device support
 
+obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
arch/arm/mach-exynos/common.c +4 -1
index 02eed29..4a82cf0 100644
@@ -477,7 +477,10 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
 		tcfg->has_fracval = 1;
 
-	s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+	if (soc_is_exynos5250())
+		s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+	else
+		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
 
 static DEFINE_SPINLOCK(eint_lock);
arch/arm/mach-exynos/dev-uart.c new file +78 -0

78 lines not on this page · raw message

arch/arm/mach-exynos/include/mach/debug-macro.S +7 -2
index 6cacf16..6c857ff 100644
@@ -21,8 +21,13 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
+		mov	\rp, #0x10000000
+		ldr	\rp, [\rp, #0x0]
+		and	\rp, \rp, #0xf00000
+		teq	\rp, #0x500000		@@ EXYNOS5
+		ldreq	\rp, =EXYNOS5_PA_UART
+		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
+		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
 		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
arch/arm/mach-exynos/include/mach/irqs.h +12 -0
index 1d401c9..f78070e 100644
@@ -173,4 +173,16 @@
 /* Set the default NR_IRQS */
 #define NR_IRQS			(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
 
+#define EXYNOS4_IRQ_UART0		IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1		IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2		IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3		IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4		IRQ_SPI(56)
+
+#define EXYNOS5_IRQ_UART0		IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1		IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2		IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3		IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4		IRQ_SPI(55)
+
 #endif /* __ASM_ARCH_IRQS_H */
arch/arm/mach-exynos/include/mach/map.h +11 -9
index 2ad4e9c..ea513c6 100644
@@ -153,7 +153,6 @@
 #define S3C_PA_IIC7			EXYNOS4_PA_IIC(7)
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART			EXYNOS4_PA_UART
 #define S3C_PA_SPI0			EXYNOS4_PA_SPI0
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
@@ -182,15 +181,18 @@
 
 /* Compatibility UART */
 
-#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define EXYNOS4_PA_UART0		0x13800000
+#define EXYNOS4_PA_UART1		0x13810000
+#define EXYNOS4_PA_UART2		0x13820000
+#define EXYNOS4_PA_UART3		0x13830000
+#define EXYNOS4_SZ_UART			SZ_256
 
-#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-#define S5P_PA_UART4			S5P_PA_UART(4)
+#define EXYNOS5_PA_UART0		0x12C00000
+#define EXYNOS5_PA_UART1		0x12C10000
+#define EXYNOS5_PA_UART2		0x12C20000
+#define EXYNOS5_PA_UART3		0x12C30000
+#define EXYNOS5_SZ_UART			SZ_256
 
-#define S5P_SZ_UART			SZ_256
+#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-exynos/include/mach/uncompress.h +12 -5
index 21d97bc..493f4f3 100644
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H __FILE__
 
+#include <asm/mach-types.h>
+
 #include <mach/map.h>
+
+volatile u8 *uart_base;
+
 #include <plat/uncompress.h>
 
 static void arch_detect_cpu(void)
 {
-	/* we do not need to do any cpu detection here at the moment. */
+	if (machine_is_smdk5250())
+		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+	else
+		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 
 	/*
 	 * For preventing FIFO overrun or infinite loop of UART console,
arch/arm/plat-s5p/Kconfig +4 -0
index 8167ce6..10e235cc7 100644
@@ -40,6 +40,10 @@ config S5P_HRT
 	help
 	  Use the High Resolution timer support
 
+config S5P_DEV_UART
+	def_bool y
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
 config S5P_PM
 	bool
 	help
arch/arm/plat-s5p/Makefile +2 -1
index 30d8c30..4bd8241 100644
@@ -12,7 +12,6 @@ obj-				:=
 
 # Core files
 
-obj-y				+= dev-uart.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
@@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
+
+obj-$(CONFIG_S5P_DEV_UART)	+= dev-uart.o
 obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
arch/arm/plat-samsung/include/plat/devs.h +2 -0
index 4214ea0..32cc67e 100644
@@ -26,6 +26,8 @@ struct s3c24xx_uart_resources {
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
arch/arm/plat-samsung/include/plat/uncompress.h +2 -0
index ee48e12..7e068d1 100644
@@ -37,7 +37,9 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
+#ifdef S3C_PA_UART
 #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
Signature · 1 line
1.7.4.4
#6 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Quoted 6 lines · Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

Quoted 11 lines
arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
index 6cacf16..6c857ff 100644
@@ -21,8 +21,13 @@

? ? ? ? */

? ? ? ?.macro addruart, rp, rv, tmp
- ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
- ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
+ ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

Thanks,
Thomas.

#7 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Hello,

Quoted 18 lines · Thomas Abraham
Quoted 6 lines · Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

arch/arm/mach-

Quoted 1 line
arch/arm/mach- renamed from arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0

exynos/include/mach/debug-macro.S

Quoted 6 lines

index 6cacf16..6c857ff 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
@@ -21,8 +21,13 @@

? ? ? ? */

Quoted 10 lines
Quoted 4 lines

? ? ? ?.macro addruart, rp, rv, tmp
- ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
- ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
+ ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

I confirm, printascii freeze the system on EXYNOS4 after that patch, tested on Exynos4210 Nuri board.

Best regards

Signature · 2 lines
Marek Szyprowski
Samsung Poland R&D Center
author
#8 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Quoted 33 lines · Marek Szyprowski

Hello,

Quoted 18 lines · Thomas Abraham
Quoted 6 lines · Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

arch/arm/mach-

Quoted 1 line
arch/arm/mach- renamed from arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0

exynos/include/mach/debug-macro.S

Quoted 6 lines

index 6cacf16..6c857ff 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
@@ -21,8 +21,13 @@
         */
 
Quoted 10 lines

arch/arm/mach-exynos/include/mach/debug-macro.S line 24

Quoted 4 lines
arch/arm/mach-exynos/include/mach/debug-macro.S +1 -2
        .macro addruart, rp, rv, tmp
-               ldr     \rp, = S3C_PA_UART
-               ldr     \rv, = S3C_VA_UART
+               mov     \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

Quoted 3 lines

I confirm, printascii freeze the system on EXYNOS4 after that patch, tested on Exynos4210 Nuri board.

Hi,

I think, it can be solved with following and if no problems, it will be fixed during v3.4-rcX.

(quoted diff) +0 -0

b/arch/arm/mach-exynos/in
index 6c857ff..a865417 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +4 -4
@@ -21,10 +21,10 @@
          */
 
         .macro addruart, rp, rv, tmp
-               mov     \rp, #0x10000000
-               ldr     \rp, [\rp, #0x0]
-               and     \rp, \rp, #0xf00000
-               teq     \rp, #0x500000          @@ EXYNOS5
+               mrc     p15, 0, \tmp, c0, c0, 0
+               and     \tmp, \tmp, #0xf0
+               teq     \tmp, #0xf0             @@ A15
+
                 ldreq   \rp, =EXYNOS5_PA_UART
                 movne   \rp, #EXYNOS4_PA_UART   @@ EXYNOS4
                 ldr     \rv, =S3C_VA_UART

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.

#9 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Hello,

Quoted 53 lines · Kukjin Kim
Quoted 33 lines · Marek Szyprowski

Hello,

Quoted 18 lines · Thomas Abraham
Quoted 6 lines · Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

arch/arm/mach-

Quoted 1 line
arch/arm/mach- renamed from arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0

exynos/include/mach/debug-macro.S

Quoted 6 lines

index 6cacf16..6c857ff 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
@@ -21,8 +21,13 @@
         */
 
Quoted 10 lines

arch/arm/mach-exynos/include/mach/debug-macro.S line 24

Quoted 4 lines
arch/arm/mach-exynos/include/mach/debug-macro.S +1 -2
        .macro addruart, rp, rv, tmp
-               ldr     \rp, = S3C_PA_UART
-               ldr     \rv, = S3C_VA_UART
+               mov     \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

Quoted 3 lines

I confirm, printascii freeze the system on EXYNOS4 after that patch, tested on Exynos4210 Nuri board.

Hi,

I think, it can be solved with following and if no problems, it will be fixed during v3.4-rcX.

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -1
index 6c857ff..a865417 100644
@@ -21,10 +21,10 @@
          */
 
         .macro addruart, rp, rv, tmp
-               mov     \rp, #0x10000000

arch/arm/mach-exynos/include/mach/debug-macro.S line 30

Quoted 10 lines
arch/arm/mach-exynos/include/mach/debug-macro.S +4 -3
-               ldr     \rp, [\rp, #0x0]
-               and     \rp, \rp, #0xf00000
-               teq     \rp, #0x500000          @@ EXYNOS5
+               mrc     p15, 0, \tmp, c0, c0, 0
+               and     \tmp, \tmp, #0xf0
+               teq     \tmp, #0xf0             @@ A15
+
                 ldreq   \rp, =EXYNOS5_PA_UART
                 movne   \rp, #EXYNOS4_PA_UART   @@ EXYNOS4
                 ldr     \rv, =S3C_VA_UART

The above patch solved the problem on Exynos4.

Best regards

Signature · 2 lines
Marek Szyprowski
Samsung Poland R&D Center
#10 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

In reply to Kukjin Kim

2012/3/22 Kukjin Kim <[email protected]>:

Quoted 70 lines · Marek Szyprowski
Quoted 41 lines

Hello,

Quoted 23 lines · Thomas Abraham
Quoted 7 lines · On 14 March 2012 20:12, Kukjin Kim<[email protected]> ?wrote:

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

arch/arm/mach-

Quoted 2 lines
arch/arm/mach- renamed from arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0

exynos/include/mach/debug-macro.S

Quoted 7 lines

index 6cacf16..6c857ff 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
@@ -21,8 +21,13 @@

? ? ? ? */

Quoted 11 lines
Quoted 4 lines

? ? ? ?.macro addruart, rp, rv, tmp
- ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
- ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
+ ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

Quoted 3 lines

I confirm, printascii freeze the system on EXYNOS4 after that patch, tested on Exynos4210 Nuri board.

Hi,

I think, it can be solved with following and if no problems, it will be fixed during v3.4-rcX.

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
index 6c857ff..a865417 100644
@@ -21,10 +21,10 @@
 

? ? ? ? */

? ? ? ?.macro addruart, rp, rv, tmp
- ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000
- ? ? ? ? ? ? ? ldr ? ? \rp, [\rp, #0x0]
- ? ? ? ? ? ? ? and ? ? \rp, \rp, #0xf00000
- ? ? ? ? ? ? ? teq ? ? \rp, #0x500000 ? ? ? ? ?@@ EXYNOS5
+ ? ? ? ? ? ? ? mrc ? ? p15, 0, \tmp, c0, c0, 0
+ ? ? ? ? ? ? ? and ? ? \tmp, \tmp, #0xf0
+ ? ? ? ? ? ? ? teq ? ? \tmp, #0xf0 ? ? ? ? ? ? @@ A15 +
? ? ? ? ? ? ? ?ldreq ? \rp, =EXYNOS5_PA_UART

Quoted 3 lines

? ? ? ? ? ? ? ?movne ? \rp, #EXYNOS4_PA_UART ? @@ EXYNOS4 ? ? ? ? ? ? ? ?ldr ? ? \rv, =S3C_VA_UART

Dear Mr. Kim,

I have tested the above patch on Exynos5. Thanks.

author
#11 lore raw

PATCH v4 5/12 ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Quoted 77 lines · Thomas Abraham

2012/3/22 Kukjin Kim<[email protected]>:

Quoted 70 lines · Marek Szyprowski
Quoted 41 lines

Hello,

Quoted 23 lines · Thomas Abraham
Quoted 7 lines · Kukjin Kim

Actually, the base address of uart is different between EXYNOS4 and EXYNOS5 and this patch enables to support uart for EXYNOS4 and EXYNOS5 SoCs at runtime.

---

[...]

arch/arm/mach-

Quoted 2 lines
arch/arm/mach- renamed from arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0

exynos/include/mach/debug-macro.S

Quoted 7 lines

index 6cacf16..6c857ff 100644

arch/arm/mach-exynos/include/mach/debug-macro.S +0 -0
@@ -21,8 +21,13 @@
         */
 
Quoted 11 lines

arch/arm/mach-exynos/include/mach/debug-macro.S line 24

Quoted 4 lines
arch/arm/mach-exynos/include/mach/debug-macro.S +1 -2
        .macro addruart, rp, rv, tmp
-               ldr     \rp, = S3C_PA_UART
-               ldr     \rv, = S3C_VA_UART
+               mov     \rp, #0x10000000

This is physical address of Exynos4/5 CPUID register which cannot be used here. And virtual address S5P_VA_CPUID also cannot be used here since this will be called before paging_init when earlyprintk boot param is used. So, with this change, earlyprintk does not work for both Exynos4 and Exynos5.

Quoted 3 lines

I confirm, printascii freeze the system on EXYNOS4 after that patch, tested on Exynos4210 Nuri board.

Hi,

I think, it can be solved with following and if no problems, it will be fixed during v3.4-rcX.

arch/arm/mach-exynos/include/mach/debug-macro.S +4 -4
index 6c857ff..a865417 100644
@@ -21,10 +21,10 @@
 
         */
 
        .macro addruart, rp, rv, tmp
-               mov     \rp, #0x10000000
-               ldr     \rp, [\rp, #0x0]
-               and     \rp, \rp, #0xf00000
-               teq     \rp, #0x500000          @@ EXYNOS5
+               mrc     p15, 0, \tmp, c0, c0, 0
+               and     \tmp, \tmp, #0xf0
+               teq     \tmp, #0xf0             @@ A15
+
                ldreq   \rp, =EXYNOS5_PA_UART
 
Quoted 3 lines

movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
ldr \rv, =S3C_VA_UART

Dear Mr. Kim,

Quoted 3 lines

I have tested the above patch on Exynos5. Thanks.

Hi Marek, Thomas,

Thanks for your test.
I will apply above patch with your 'Tested-by:...'

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.

author
#12 lore raw

PATCH v4 6/12 ARM: EXYNOS: add support for EXYNOS5250 SoC

In reply to Kukjin Kim

This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores. Since actually, most codes in mach-exynos/ are used commonly for EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented in mach-exynos/.

---
 arch/arm/Makefile                            |    1 +
 arch/arm/mach-exynos/common.c                |  191 ++++++++++++++++++++++++--
 arch/arm/mach-exynos/common.h                |   11 ++
 arch/arm/mach-exynos/include/mach/map.h      |   21 +++-
 arch/arm/mach-exynos/include/mach/regs-pmu.h |    1 +
 arch/arm/plat-s5p/Kconfig                    |    4 +-
 arch/arm/plat-samsung/include/plat/cpu.h     |   10 ++
 7 files changed, 223 insertions(+), 16 deletions(-)
arch/arm/Makefile +1 -0
index 1683bfb..a826ffc 100644
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
+machine-$(CONFIG_ARCH_EXYNOS5)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
arch/arm/mach-exynos/common.c +179 -12

282 lines not on this page · raw message

arch/arm/mach-exynos/common.h +11 -0
index b32c6b5..677b546 100644
@@ -16,7 +16,9 @@ extern struct sys_timer exynos4_timer;
 
 void exynos_init_io(struct map_desc *mach_desc, int size);
 void exynos4_init_irq(void);
+void exynos5_init_irq(void);
 void exynos4_restart(char mode, const char *cmd);
+void exynos5_restart(char mode, const char *cmd);
 
 #ifdef CONFIG_ARCH_EXYNOS4
 void exynos4_register_clocks(void);
@@ -27,6 +29,15 @@ void exynos4_setup_clocks(void);
 #define exynos4_setup_clocks()
 #endif
 
+#ifdef CONFIG_ARCH_EXYNOS5
+void exynos5_register_clocks(void);
+void exynos5_setup_clocks(void);
+
+#else
+#define exynos5_register_clocks()
+#define exynos5_setup_clocks()
+#endif
+
 #ifdef CONFIG_CPU_EXYNOS4210
 void exynos4210_register_clocks(void);
 
arch/arm/mach-exynos/include/mach/map.h +19 -2
index ea513c6..bf90bb0 100644
@@ -25,6 +25,7 @@
 
 #define EXYNOS4_PA_SYSRAM0		0x02025000
 #define EXYNOS4_PA_SYSRAM1		0x02020000
+#define EXYNOS5_PA_SYSRAM		0x02020000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
@@ -44,14 +45,23 @@
 #define EXYNOS4_PA_ONENAND		0x0C000000
 #define EXYNOS4_PA_ONENAND_DMA		0x0C600000
 
-#define EXYNOS4_PA_CHIPID		0x10000000
+#define EXYNOS_PA_CHIPID		0x10000000
 
 #define EXYNOS4_PA_SYSCON		0x10010000
+#define EXYNOS5_PA_SYSCON		0x10050100
+
 #define EXYNOS4_PA_PMU			0x10020000
+#define EXYNOS5_PA_PMU			0x10040000
+
 #define EXYNOS4_PA_CMU			0x10030000
+#define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_SYSTIMER		0x10050000
+#define EXYNOS5_PA_SYSTIMER		0x101C0000
+
 #define EXYNOS4_PA_WATCHDOG		0x10060000
+#define EXYNOS5_PA_WATCHDOG		0x101D0000
+
 #define EXYNOS4_PA_RTC			0x10070000
 
 #define EXYNOS4_PA_KEYPAD		0x100A0000
@@ -59,9 +69,12 @@
 #define EXYNOS4_PA_DMC0			0x10400000
 
 #define EXYNOS4_PA_COMBINER		0x10440000
+#define EXYNOS5_PA_COMBINER		0x10440000
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
+#define EXYNOS5_PA_GIC_CPU		0x10480000
+#define EXYNOS5_PA_GIC_DIST		0x10490000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
@@ -92,7 +105,6 @@
 #define EXYNOS4_PA_SPI1			0x13930000
 #define EXYNOS4_PA_SPI2			0x13940000
 
-
 #define EXYNOS4_PA_GPIO1		0x11400000
 #define EXYNOS4_PA_GPIO2		0x11000000
 #define EXYNOS4_PA_GPIO3		0x03860000
@@ -110,6 +122,7 @@
 #define EXYNOS4_PA_SATAPHY_CTRL		0x126B0000
 
 #define EXYNOS4_PA_SROMC		0x12570000
+#define EXYNOS5_PA_SROMC		0x12250000
 
 #define EXYNOS4_PA_EHCI			0x12580000
 #define EXYNOS4_PA_OHCI			0x12590000
@@ -117,6 +130,7 @@
 #define EXYNOS4_PA_MFC			0x13400000
 
 #define EXYNOS4_PA_UART			0x13800000
+#define EXYNOS5_PA_UART			0x12C00000
 
 #define EXYNOS4_PA_VP			0x12C00000
 #define EXYNOS4_PA_MIXER		0x12C10000
@@ -125,6 +139,7 @@
 #define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
 
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
+#define EXYNOS5_PA_IIC(x)		(0x12C60000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
 #define EXYNOS4_PA_ADC1			0x13911000
@@ -134,8 +149,10 @@
 #define EXYNOS4_PA_SPDIF		0x139B0000
 
 #define EXYNOS4_PA_TIMER		0x139D0000
+#define EXYNOS5_PA_TIMER		0x12DD0000
 
 #define EXYNOS4_PA_SDRAM		0x40000000
+#define EXYNOS5_PA_SDRAM		0x40000000
 
 /* Compatibiltiy Defines */
 
arch/arm/mach-exynos/include/mach/regs-pmu.h +1 -0
index 4fff8e9..4c53f38 100644
@@ -31,6 +31,7 @@
 #define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
+#define EXYNOS_SWRESET				S5P_PMUREG(0x0400)
 
 #define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
arch/arm/plat-s5p/Kconfig +2 -2
index 10e235cc7..88795ea 100644
@@ -9,8 +9,8 @@ config PLAT_S5P
 	bool
 	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
 	default y
-	select ARM_VIC if !ARCH_EXYNOS4
-	select ARM_GIC if ARCH_EXYNOS4
+	select ARM_VIC if !ARCH_EXYNOS
+	select ARM_GIC if ARCH_EXYNOS
 	select GIC_NON_BANKED if ARCH_EXYNOS4
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
arch/arm/plat-samsung/include/plat/cpu.h +10 -0
index 73cb3cf..787ceac 100644
@@ -42,6 +42,9 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
 #define IS_SAMSUNG_CPU(name, id, mask)		\
 static inline int is_samsung_##name(void)	\
 {						\
@@ -58,6 +61,7 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -120,6 +124,12 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 #define EXYNOS4210_REV_1_0	(0x10)
 #define EXYNOS4210_REV_1_1	(0x11)
 
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
Signature · 1 line
1.7.4.4
author
#13 lore raw

PATCH v4 7/12 ARM: EXYNOS: add interrupt definitions for EXYNOS5250

In reply to Kukjin Kim

This patch adds the interrupt definitions for EXYNOS5250 at <mach/irqs.h> file and it is needed for EXYNOS5250 SoC. As a note, for single zImage of EXYNOS4 and EXYNOS5, prefix of EXYNOS4_ and EXYNOS5_ has been added.

---
 arch/arm/mach-exynos/common.c            |  101 ++++--
 arch/arm/mach-exynos/dev-ahci.c          |    4 +-
 arch/arm/mach-exynos/dev-audio.c         |    4 +-
 arch/arm/mach-exynos/dma.c               |    6 +-
 arch/arm/mach-exynos/include/mach/irqs.h |  587 ++++++++++++++++++++++--------
 arch/arm/mach-exynos/mct.c               |   23 +-
 arch/arm/plat-s5p/irq-pm.c               |   25 +-
 arch/arm/plat-samsung/irq-vic-timer.c    |   16 +
 8 files changed, 558 insertions(+), 208 deletions(-)
arch/arm/mach-exynos/common.c +71 -30
index 7fdb139..4ef0cb5 100644
@@ -345,6 +345,11 @@ static void __init exynos5_map_io(void)
 {
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 
+	s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
+	s3c_device_i2c0.resource[0].end   = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
+	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
+	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -451,7 +456,14 @@ static struct irq_chip combiner_chip = {
 
 static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
 {
-	if (combiner_nr >= MAX_COMBINER_NR)
+	unsigned int max_nr;
+
+	if (soc_is_exynos5250())
+		max_nr = EXYNOS5_MAX_COMBINER_NR;
+	else
+		max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+	if (combiner_nr >= max_nr)
 		BUG();
 	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
 		BUG();
@@ -462,8 +474,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
 			  unsigned int irq_start)
 {
 	unsigned int i;
+	unsigned int max_nr;
 
-	if (combiner_nr >= MAX_COMBINER_NR)
+	if (soc_is_exynos5250())
+		max_nr = EXYNOS5_MAX_COMBINER_NR;
+	else
+		max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+	if (combiner_nr >= max_nr)
 		BUG();
 
 	combiner_data[combiner_nr].base = base;
@@ -506,7 +524,7 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
 
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
 				COMBINER_IRQ(irq, 0));
@@ -527,7 +545,7 @@ void __init exynos5_init_irq(void)
 
 	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
 
-	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
 				COMBINER_IRQ(irq, 0));
 		combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -651,27 +669,43 @@ static DEFINE_SPINLOCK(eint_lock);
 
 static unsigned int eint0_15_data[16];
 
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
-	u32 ret = 0;
-
-	switch (number) {
-	case 0 ... 3:
-		ret = (number + IRQ_EINT0);
-		break;
-	case 4 ... 7:
-		ret = (number + (IRQ_EINT4 - 4));
-		break;
-	case 8 ... 15:
-		ret = (number + (IRQ_EINT8 - 8));
-		break;
-	default:
-		printk(KERN_ERR "number available : %d\n", number);
-	}
-
-	return ret;
-}
+static unsigned int exynos4_eint0_15_src_int[16] = {
+	EXYNOS4_IRQ_EINT0,
+	EXYNOS4_IRQ_EINT1,
+	EXYNOS4_IRQ_EINT2,
+	EXYNOS4_IRQ_EINT3,
+	EXYNOS4_IRQ_EINT4,
+	EXYNOS4_IRQ_EINT5,
+	EXYNOS4_IRQ_EINT6,
+	EXYNOS4_IRQ_EINT7,
+	EXYNOS4_IRQ_EINT8,
+	EXYNOS4_IRQ_EINT9,
+	EXYNOS4_IRQ_EINT10,
+	EXYNOS4_IRQ_EINT11,
+	EXYNOS4_IRQ_EINT12,
+	EXYNOS4_IRQ_EINT13,
+	EXYNOS4_IRQ_EINT14,
+	EXYNOS4_IRQ_EINT15,
+};
 
+static unsigned int exynos5_eint0_15_src_int[16] = {
+	EXYNOS5_IRQ_EINT0,
+	EXYNOS5_IRQ_EINT1,
+	EXYNOS5_IRQ_EINT2,
+	EXYNOS5_IRQ_EINT3,
+	EXYNOS5_IRQ_EINT4,
+	EXYNOS5_IRQ_EINT5,
+	EXYNOS5_IRQ_EINT6,
+	EXYNOS5_IRQ_EINT7,
+	EXYNOS5_IRQ_EINT8,
+	EXYNOS5_IRQ_EINT9,
+	EXYNOS5_IRQ_EINT10,
+	EXYNOS5_IRQ_EINT11,
+	EXYNOS5_IRQ_EINT12,
+	EXYNOS5_IRQ_EINT13,
+	EXYNOS5_IRQ_EINT14,
+	EXYNOS5_IRQ_EINT15,
+};
 static inline void exynos4_irq_eint_mask(struct irq_data *data)
 {
 	u32 mask;
@@ -816,7 +850,7 @@ static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 {
 	u32 *irq_data = irq_get_handler_data(irq);
 	struct irq_chip *chip = irq_get_chip(irq);
@@ -846,15 +880,22 @@ static int __init exynos4_init_irq_eint(void)
 		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
 	}
 
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+	irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
 
 	for (irq = 0 ; irq <= 15 ; irq++) {
 		eint0_15_data[irq] = IRQ_EINT(irq);
 
-		irq_set_handler_data(exynos4_get_irq_nr(irq),
-				     &eint0_15_data[irq]);
-		irq_set_chained_handler(exynos4_get_irq_nr(irq),
-					exynos4_irq_eint0_15);
+		if (soc_is_exynos5250()) {
+			irq_set_handler_data(exynos5_eint0_15_src_int[irq],
+					     &eint0_15_data[irq]);
+			irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
+						exynos_irq_eint0_15);
+		} else {
+			irq_set_handler_data(exynos4_eint0_15_src_int[irq],
+					     &eint0_15_data[irq]);
+			irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
+						exynos_irq_eint0_15);
+		}
 	}
 
 	return 0;
arch/arm/mach-exynos/dev-ahci.c +2 -2
index f57a3de..50ce5b0 100644
@@ -242,8 +242,8 @@ static struct resource exynos4_ahci_resource[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_SATA,
-		.end	= IRQ_SATA,
+		.start	= EXYNOS4_IRQ_SATA,
+		.end	= EXYNOS4_IRQ_SATA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
arch/arm/mach-exynos/dev-audio.c +2 -2
index 5a9f9c2e..7199e1a 100644
@@ -304,8 +304,8 @@ static struct resource exynos4_ac97_resource[] = {
 		.flags	= IORESOURCE_DMA,
 	},
 	[4] = {
-		.start	= IRQ_AC97,
-		.end	= IRQ_AC97,
+		.start	= EXYNOS4_IRQ_AC97,
+		.end	= EXYNOS4_IRQ_AC97,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
arch/arm/mach-exynos/dma.c +3 -3
index 13607c4..3983abe 100644
@@ -108,7 +108,7 @@ static u8 exynos4212_pdma0_peri[] = {
 struct dma_pl330_platdata exynos4_pdma0_pdata;
 
 static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
+	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
 static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -174,7 +174,7 @@ static u8 exynos4212_pdma1_peri[] = {
 static struct dma_pl330_platdata exynos4_pdma1_pdata;
 
 static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
+	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
 static u8 mdma_peri[] = {
 	DMACH_MTOM_0,
@@ -193,7 +193,7 @@ static struct dma_pl330_platdata exynos4_mdma1_pdata = {
 };
 
 static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata);
+	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
 
 static int __init exynos4_dma_init(void)
 {
arch/arm/mach-exynos/include/mach/irqs.h +432 -155

613 lines not on this page · raw message

arch/arm/mach-exynos/mct.c +13 -10
index 85b5527..1016515 100644
@@ -258,7 +258,10 @@ static void exynos4_clockevent_init(void)
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_register_device(&mct_comp_device);
 
-	setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+	if (soc_is_exynos5250())
+		setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
+	else
+		setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
@@ -406,16 +409,16 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = IRQ_MCT_L0;
-			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+			evt->irq = EXYNOS4_IRQ_MCT_L0;
+			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
 		} else {
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = IRQ_MCT_L1;
-			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+			evt->irq = EXYNOS4_IRQ_MCT_L1;
+			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
+			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
 		}
 	} else {
-		enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
 	}
 }
 
@@ -437,7 +440,7 @@ void local_timer_stop(struct clock_event_device *evt)
 		else
 			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
-		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+		disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
 }
 #endif /* CONFIG_LOCAL_TIMERS */
 
@@ -452,11 +455,11 @@ static void __init exynos4_timer_resources(void)
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
-		err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+		err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
 					 exynos4_mct_tick_isr, "MCT",
 					 &percpu_mct_tick);
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
-		     IRQ_MCT_LOCALTIMER, err);
+		     EXYNOS_IRQ_MCT_LOCALTIMER, err);
 	}
 #endif /* CONFIG_LOCAL_TIMERS */
 }
arch/arm/plat-s5p/irq-pm.c +19 -6
index 327acb3..d1bfeca 100644
@@ -39,19 +39,32 @@ unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
 	unsigned long irqbit;
+	unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+	if (soc_is_exynos5250()) {
+		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+	} else {
+		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+	}
+#else
+	irq_rtc_tic = IRQ_RTC_TIC;
+	irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
 
-	switch (data->irq) {
-	case IRQ_RTC_TIC:
-	case IRQ_RTC_ALARM:
-		irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM);
 		if (!state)
 			s3c_irqwake_intmask |= irqbit;
 		else
 			s3c_irqwake_intmask &= ~irqbit;
-		break;
-	default:
+	} else {
 		return -ENOENT;
 	}
+
 	return 0;
 }
 
arch/arm/plat-samsung/irq-vic-timer.c +16 -0
index 51583cd..f980cf3 100644
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 
 #include <mach/map.h>
+#include <plat/cpu.h>
 #include <plat/irq-vic-timer.h>
 #include <plat/regs-timer.h>
 
@@ -57,6 +58,21 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
 	struct irq_chip_type *ct;
 	unsigned int i;
 
+#ifdef CONFIG_ARCH_EXYNOS
+	if (soc_is_exynos5250()) {
+		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
+		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
+		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
+		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
+		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
+	} else {
+		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
+		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
+		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
+		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
+		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
+	}
+#endif
 	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
 					 S3C64XX_TINT_CSTAT, handle_level_irq);
 
Signature · 1 line
1.7.4.4
author
#14 lore raw

PATCH v4 8/12 ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5

In reply to Kukjin Kim

From: Eunki Kim <[email protected]>

The GPIOs of EXYNOS4 and EXYNOS5 are changed to use ioremap instead of static mapping. It alse causes the change of external interrupt IO mapping. This patch changes EXYNOS4 to EXYNOS for common use and changes EINT_x macros for supporting dynamic IO mapping.

---
 arch/arm/mach-exynos/common.c                 |  147 ++++++++++++++++---------
 arch/arm/mach-exynos/include/mach/regs-gpio.h |   20 ++--
 2 files changed, 105 insertions(+), 62 deletions(-)
arch/arm/mach-exynos/common.c +96 -51
index 4ef0cb5..cbbaca5 100644
@@ -665,10 +665,60 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
 
+static void __iomem *exynos_eint_base;
+
 static DEFINE_SPINLOCK(eint_lock);
 
 static unsigned int eint0_15_data[16];
 
+static inline int exynos4_irq_to_gpio(unsigned int irq)
+{
+	if (irq < IRQ_EINT(0))
+		return -EINVAL;
+
+	irq -= IRQ_EINT(0);
+	if (irq < 8)
+		return EXYNOS4_GPX0(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS4_GPX1(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS4_GPX2(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS4_GPX3(irq);
+
+	return -EINVAL;
+}
+
+static inline int exynos5_irq_to_gpio(unsigned int irq)
+{
+	if (irq < IRQ_EINT(0))
+		return -EINVAL;
+
+	irq -= IRQ_EINT(0);
+	if (irq < 8)
+		return EXYNOS5_GPX0(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS5_GPX1(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS5_GPX2(irq);
+
+	irq -= 8;
+	if (irq < 8)
+		return EXYNOS5_GPX3(irq);
+
+	return -EINVAL;
+}
+
 static unsigned int exynos4_eint0_15_src_int[16] = {
 	EXYNOS4_IRQ_EINT0,
 	EXYNOS4_IRQ_EINT1,
@@ -706,41 +756,41 @@ static unsigned int exynos5_eint0_15_src_int[16] = {
 	EXYNOS5_IRQ_EINT14,
 	EXYNOS5_IRQ_EINT15,
 };
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
+static inline void exynos_irq_eint_mask(struct irq_data *data)
 {
 	u32 mask;
 
 	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+	mask |= EINT_OFFSET_BIT(data->irq);
+	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
 	spin_unlock(&eint_lock);
 }
 
-static void exynos4_irq_eint_unmask(struct irq_data *data)
+static void exynos_irq_eint_unmask(struct irq_data *data)
 {
 	u32 mask;
 
 	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+	mask &= ~(EINT_OFFSET_BIT(data->irq));
+	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
 	spin_unlock(&eint_lock);
 }
 
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
+static inline void exynos_irq_eint_ack(struct irq_data *data)
 {
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+	__raw_writel(EINT_OFFSET_BIT(data->irq),
+		     EINT_PEND(exynos_eint_base, data->irq));
 }
 
-static void exynos4_irq_eint_maskack(struct irq_data *data)
+static void exynos_irq_eint_maskack(struct irq_data *data)
 {
-	exynos4_irq_eint_mask(data);
-	exynos4_irq_eint_ack(data);
+	exynos_irq_eint_mask(data);
+	exynos_irq_eint_ack(data);
 }
 
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
 {
 	int offs = EINT_OFFSET(data->irq);
 	int shift;
@@ -777,39 +827,27 @@ static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
 	mask = 0x7 << shift;
 
 	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
 	ctrl &= ~mask;
 	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	__raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
 	spin_unlock(&eint_lock);
 
-	switch (offs) {
-	case 0 ... 7:
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-		break;
-	case 8 ... 15:
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-		break;
-	case 16 ... 23:
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-		break;
-	case 24 ... 31:
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-		break;
-	default:
-		printk(KERN_ERR "No such irq number %d", offs);
-	}
+	if (soc_is_exynos5250())
+		s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
+	else
+		s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
 
 	return 0;
 }
 
-static struct irq_chip exynos4_irq_eint = {
-	.name		= "exynos4-eint",
-	.irq_mask	= exynos4_irq_eint_mask,
-	.irq_unmask	= exynos4_irq_eint_unmask,
-	.irq_mask_ack	= exynos4_irq_eint_maskack,
-	.irq_ack	= exynos4_irq_eint_ack,
-	.irq_set_type	= exynos4_irq_eint_set_type,
+static struct irq_chip exynos_irq_eint = {
+	.name		= "exynos-eint",
+	.irq_mask	= exynos_irq_eint_mask,
+	.irq_unmask	= exynos_irq_eint_unmask,
+	.irq_mask_ack	= exynos_irq_eint_maskack,
+	.irq_ack	= exynos_irq_eint_ack,
+	.irq_set_type	= exynos_irq_eint_set_type,
 #ifdef CONFIG_PM
 	.irq_set_wake	= s3c_irqext_wake,
 #endif
@@ -824,12 +862,12 @@ static struct irq_chip exynos4_irq_eint = {
  *
  * Each EINT pend/mask registers handle eight of them.
  */
-static inline void exynos4_irq_demux_eint(unsigned int start)
+static inline void exynos_irq_demux_eint(unsigned int start)
 {
 	unsigned int irq;
 
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
+	u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
 
 	status &= ~mask;
 	status &= 0xff;
@@ -841,12 +879,12 @@ static inline void exynos4_irq_demux_eint(unsigned int start)
 	}
 }
 
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_get_chip(irq);
 	chained_irq_enter(chip, desc);
-	exynos4_irq_demux_eint(IRQ_EINT(16));
-	exynos4_irq_demux_eint(IRQ_EINT(24));
+	exynos_irq_demux_eint(IRQ_EINT(16));
+	exynos_irq_demux_eint(IRQ_EINT(24));
 	chained_irq_exit(chip, desc);
 }
 
@@ -867,20 +905,27 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int __init exynos4_init_irq_eint(void)
+static int __init exynos_init_irq_eint(void)
 {
 	int irq;
 
 	if (soc_is_exynos5250())
-		return 0;
+		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+	else
+		exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+
+	if (exynos_eint_base == NULL) {
+		pr_err("unable to ioremap for EINT base address\n");
+		return -ENOMEM;
+	}
 
 	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
 					 handle_level_irq);
 		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
 	}
 
-	irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+	irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
 
 	for (irq = 0 ; irq <= 15 ; irq++) {
 		eint0_15_data[irq] = IRQ_EINT(irq);
@@ -900,4 +945,4 @@ static int __init exynos4_init_irq_eint(void)
 
 	return 0;
 }
-arch_initcall(exynos4_init_irq_eint);
+arch_initcall(exynos_init_irq_eint);
arch/arm/mach-exynos/include/mach/regs-gpio.h +9 -11
index 1401b21..e4b5b60 100644
@@ -16,6 +16,15 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+#define EINT_CON(b, x)			(b + 0xE00 + (EINT_REG_NR(x) * 4))
+#define EINT_FLTCON(b, x)		(b + 0xE80 + (EINT_REG_NR(x) * 4))
+#define EINT_MASK(b, x)			(b + 0xF00 + (EINT_REG_NR(x) * 4))
+#define EINT_PEND(b, x)			(b + 0xF40 + (EINT_REG_NR(x) * 4))
+
+#define EINT_OFFSET_BIT(x)		(1 << (EINT_OFFSET(x) & 0x7))
+
+/* compatibility for plat-s5p/irq-pm.c */
 #define EXYNOS4_EINT40CON		(S5P_VA_GPIO2 + 0xE00)
 #define S5P_EINT_CON(x)			(EXYNOS4_EINT40CON + ((x) * 0x4))
 
@@ -28,15 +37,4 @@
 #define EXYNOS4_EINT40PEND		(S5P_VA_GPIO2 + 0xF40)
 #define S5P_EINT_PEND(x)		(EXYNOS4_EINT40PEND + ((x) * 0x4))
 
-#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE			S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x)			EXYNOS4_GPX0(x)
-#define EINT_GPIO_1(x)			EXYNOS4_GPX1(x)
-#define EINT_GPIO_2(x)			EXYNOS4_GPX2(x)
-#define EINT_GPIO_3(x)			EXYNOS4_GPX3(x)
-
 #endif /* __ASM_ARCH_REGS_GPIO_H */
Signature · 1 line
1.7.4.4
author
#15 lore raw

PATCH v4 9/12 ARM: EXYNOS: add support get_core_count() for EXYNOS5250

In reply to Kukjin Kim

The EXYNOS5250 has two Cortex-A15 cores and there's no need to call scu_enable() in platform_smp_prepare_cpus() because Cortex-A15 has no regarding scu register which can be used for getting number of cores.

---
 arch/arm/mach-exynos/platsmp.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)
arch/arm/mach-exynos/platsmp.c +6 -3
index 0f2035a..36c3984 100644
@@ -166,7 +166,10 @@ void __init smp_init_cpus(void)
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
 
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+	if (soc_is_exynos5250())
+		ncores = 2;
+	else
+		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
@@ -183,8 +186,8 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-
-	scu_enable(scu_base_addr());
+	if (!soc_is_exynos5250())
+		scu_enable(scu_base_addr());
 
 	/*
 	 * Write the address of secondary startup into the
Signature · 1 line
1.7.4.4
author
#16 lore raw

PATCH v4 10/12 ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs

In reply to Kukjin Kim

This patch adds CONFIG_ARCH_EXYNOS5 and CONFIG_SOC_EXYNOS5250 for supporting EXYNOS5250 SoC and allows supporting EXYNOS4 and EXYNOS5 together.

---
 arch/arm/mach-exynos/Kconfig  |   18 +++++++++++++-----
 arch/arm/mach-exynos/Makefile |    1 +
 2 files changed, 14 insertions(+), 5 deletions(-)
arch/arm/mach-exynos/Kconfig +13 -5
index 5e0a456..a2ed05c 100644
@@ -11,18 +11,19 @@ if ARCH_EXYNOS
 
 menu "SAMSUNG EXYNOS SoCs Support"
 
-choice
-	prompt "EXYNOS System Type"
-	default ARCH_EXYNOS4
-
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	default y
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
-endchoice
+config ARCH_EXYNOS5
+	bool "SAMSUNG EXYNOS5"
+	select HAVE_SMP
+	help
+	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
 
 comment "EXYNOS SoCs"
 
@@ -55,6 +56,13 @@ config SOC_EXYNOS4412
 	help
 	  Enable EXYNOS4412 SoC support
 
+config SOC_EXYNOS5250
+	bool "SAMSUNG EXYNOS5250"
+	default y
+	depends on ARCH_EXYNOS5
+	help
+	  Enable EXYNOS5250 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
arch/arm/mach-exynos/Makefile +1 -0
index f8a3770..7214092 100644
@@ -14,6 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
+obj-$(CONFIG_ARCH_EXYNOS5)	+= clock-exynos5.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 
Signature · 1 line
1.7.4.4
author
#17 lore raw

PATCH v4 11/12 ARM: EXYNOS: add support device tree enabled board file for EXYNOS5

In reply to Kukjin Kim

This patch adds a new EXYNOS5 compatible device tree enabled board When using this, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel.

Cc Thomas Abraham <[email protected]>
Cc Grant Likely <[email protected]>
---
 arch/arm/mach-exynos/Kconfig           |   22 +++++++++-
 arch/arm/mach-exynos/Makefile          |    1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c |   78 ++++++++++++++++++++++++++++++++
 3 files changed, 100 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-exynos/mach-exynos5-dt.c
arch/arm/mach-exynos/Kconfig +21 -1
index a2ed05c..ac24386 100644
@@ -362,7 +362,18 @@ config MACH_SMDK4412
 	  Machine support for Samsung SMDK4412
 endif
 
-comment "Flattened Device Tree based board for Exynos4 based SoC"
+if ARCH_EXYNOS5
+
+comment "EXYNOS5250 Boards"
+
+config MACH_SMDK5250
+	bool "SMDK5250"
+	select SOC_EXYNOS5250
+	help
+	  Machine support for Samsung SMDK5250
+endif
+
+comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
@@ -376,6 +387,15 @@ config MACH_EXYNOS4_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
+config MACH_EXYNOS5_DT
+	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	select SOC_EXYNOS5250
+	select USE_OF
+	select ARM_AMBA
+	help
+	  Machine support for Samsung Exynos4 machine with device tree enabled.
+	  Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+
 if ARCH_EXYNOS4
 
 comment "Configuration for HSMMC 8-bit bus width"
arch/arm/mach-exynos/Makefile +1 -0
index 7214092..29967ef 100644
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
 obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
+obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
 
 # device support
 
arch/arm/mach-exynos/mach-exynos5-dt.c new file +78 -0

78 lines not on this page · raw message

Signature · 1 line
1.7.4.4
#18 lore raw

PATCH v4 11/12 ARM: EXYNOS: add support device tree enabled board file for EXYNOS5

Quoted 3 lines · Kukjin Kim

This patch adds a new EXYNOS5 compatible device tree enabled board When using this, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel.

Hi,

Sorry, missed this last time around:

Quoted 9 lines
arch/arm/mach-exynos/Kconfig +0 -1
index a2ed05c..ac24386 100644
@@ -362,7 +362,18 @@ config MACH_SMDK4412
 	  Machine support for Samsung SMDK4412
 endif
 
-comment "Flattened Device Tree based board for Exynos4 based SoC"

arch/arm/mach-exynos/Kconfig config MACH_SMDK4412 · line 374

Quoted 10 lines
arch/arm/mach-exynos/Kconfig +10 -0
+if ARCH_EXYNOS5
+
+comment "EXYNOS5250 Boards"
+
+config MACH_SMDK5250
+	bool "SMDK5250"
+	select SOC_EXYNOS5250
+	help
+	  Machine support for Samsung SMDK5250
+endif

There's no board file for SMDK5250 in this series (and there shouldn't be since it should all be covered by MACH_EXYNOS5_DT. So the above config option can go away.

-Olof

author
#19 lore raw

PATCH v4 11/12 ARM: EXYNOS: add support device tree enabled board file for EXYNOS5

Quoted 7 lines · Olof Johansson
Quoted 3 lines · Kukjin Kim

This patch adds a new EXYNOS5 compatible device tree enabled board When using this, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel.

Hi,

Hi Olof,

Quoted 2 lines

Sorry, missed this last time around:

No problem and thanks.

Quoted 8 lines
Quoted 8 lines
arch/arm/mach-exynos/Kconfig +0 -0
index a2ed05c..ac24386 100644
@@ -362,7 +362,18 @@ config MACH_SMDK4412
  	  Machine support for Samsung SMDK4412
  endif
 
Quoted 17 lines

arch/arm/mach-exynos/Kconfig config MACH_SMDK4412 · line 374

Quoted 11 lines
arch/arm/mach-exynos/Kconfig +10 -1
-comment "Flattened Device Tree based board for Exynos4 based SoC"
+if ARCH_EXYNOS5
+
+comment "EXYNOS5250 Boards"
+
+config MACH_SMDK5250
+	bool "SMDK5250"
+	select SOC_EXYNOS5250
+	help
+	  Machine support for Samsung SMDK5250
+endif

There's no board file for SMDK5250 in this series (and there shouldn't be since it should all be covered by MACH_EXYNOS5_DT. So the above config option can go away.

Yeah, you're right. I think, it seem that remained after just testing anyway, it will be fixed before sending pull request.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.

author
#20 lore raw

PATCH v4 12/12 ARM: dts: add initial dts file for EXYNOS5250, SMDK5250

In reply to Kukjin Kim

This patch adds initial dts file for EXYNOS5250 SoC. This dts file is including the SoC specific devices and properties. And adds the dts file for SMDK5250 board which uses the EXYNOS5250 dts file. Its board specific properites will be added later.

Cc Thomas Abraham <[email protected]>
Cc Grant Likely <[email protected]>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts |   26 ++
 arch/arm/boot/dts/exynos5250.dtsi         |  413 +++++++++++++++++++++++++++++
 2 files changed, 439 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5250-smdk5250.dts
 create mode 100644 arch/arm/boot/dts/exynos5250.dtsi
arch/arm/boot/dts/exynos5250-smdk5250.dts new file +26 -0
new file mode 100644
index 0000000..399d17b
@@ -0,0 +1,26 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+	};
+};
arch/arm/boot/dts/exynos5250.dtsi new file +413 -0

413 lines not on this page · raw message

Signature · 1 line
1.7.4.4
#21 lore raw

v4 cover ARM: EXYNOS: add support new EXYNOS5250

In reply to Kukjin Kim
Quoted 2 lines · Kukjin Kim

This patch adds support EXYNOS5250 SoC which has two A15 cores can be used on mobile and tablet devices.

Looks good. I've switched back with Arnd so he does pulls right now, but I'd be OK with this going in as it is now (see one nit to fixup when you build the branch -- no need to repost with it I think).

So, I'll leave it up to Arnd to pull but it looks good enough for me at this time.

-Olof

author
#22 lore raw

v4 cover ARM: EXYNOS: add support new EXYNOS5250

Quoted 8 lines · Olof Johansson
Quoted 2 lines · Kukjin Kim

This patch adds support EXYNOS5250 SoC which has two A15 cores can be used on mobile and tablet devices.

Looks good. I've switched back with Arnd so he does pulls right now, but I'd be OK with this going in as it is now (see one nit to fixup when you build the branch -- no need to repost with it I think).

OK, let me do it.

Quoted 3 lines

So, I'll leave it up to Arnd to pull but it looks good enough for me at this time.

OK, I see.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.