build error after recent pull

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928,
/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
for further information)
ERROR: Logfile of failure stored in:
/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
Log data follows:
| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target /build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928
(/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
failed with exit code '1'

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Quoted 29 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

What's your build host?

Quoted 4 lines

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

gcc is 4.6.1

Quoted 34 lines · jfabernathy

Quoted 33 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Quoted 4 lines

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

Quoted 35 lines · Gary Thomas

Quoted 34 lines · jfabernathy

Quoted 33 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Quoted 7 lines

Quoted 4 lines

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Quoted 38 lines · jfabernathy

Quoted 37 lines · Gary Thomas

Quoted 36 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

Quoted 6 lines

Quoted 5 lines

Quoted 2 lines

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?) stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

Quoted 39 lines · Gary Thomas

Quoted 38 lines · jfabernathy

Quoted 37 lines · Gary Thomas

Quoted 36 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

Quoted 8 lines

Quoted 6 lines

Quoted 5 lines

Quoted 2 lines

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

No to question on rm_work in local.conf

Quoted 4 lines

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see if it completes.

Quoted 1 line

Quoted 5 lines

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?) stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??

Quoted 64 lines · jfabernathy

Quoted 42 lines · Gary Thomas

Quoted 41 lines · jfabernathy

Quoted 40 lines · Gary Thomas

Quoted 38 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

gcc is 4.6.1

Quoted 6 lines

Quoted 4 lines

Quoted 2 lines

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

No to question on rm_work in local.conf

Quoted 4 lines

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see if it completes.

Quoted 6 lines

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?) stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

Quoted 1 line

So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??

If you run just 'bitbake core-image-sato', any packages (recipes) which have been changed that are used by the image will be rebuilt. You should not have to clean anything for this to work properly.

Quoted 66 lines · Gary Thomas

Quoted 64 lines · jfabernathy

Quoted 39 lines · Gary Thomas

Quoted 38 lines · jfabernathy

Quoted 37 lines · Gary Thomas

Quoted 36 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

Quoted 8 lines

Quoted 6 lines

Quoted 5 lines

Quoted 2 lines

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

No to question on rm_work in local.conf

Quoted 4 lines

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see if it completes.

Quoted 6 lines

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?) stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??

Quoted 4 lines

If you run just 'bitbake core-image-sato', any packages (recipes) which have been changed that are used by the image will be rebuilt. You should not have to clean anything for this to work properly.

After I fixed mesa-dri and started bitbake core-image-sato, it ran for a long time and had a build failure similar to the first one on kexec-tools. I did the bitbake -c cleansstate kexec-tools trick again and restarted bitbake core-image-sato. Not sure why this is, but it seems to work.

Quoted 68 lines · jfabernathy

Quoted 67 lines · Gary Thomas

Quoted 65 lines · jfabernathy

Quoted 39 lines · Gary Thomas

Quoted 38 lines · jfabernathy

Quoted 37 lines · Gary Thomas

Quoted 36 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

Quoted 8 lines

Quoted 6 lines

Quoted 5 lines

Quoted 2 lines

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

No to question on rm_work in local.conf

Quoted 4 lines

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see if it completes.

Quoted 7 lines

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much
- images don't have much (any?)
stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??

Quoted 7 lines

Quoted 4 lines

If you run just 'bitbake core-image-sato', any packages (recipes) which have been changed that are used by the image will be rebuilt. You should not have to clean anything for this to work properly.

After I fixed mesa-dri and started bitbake core-image-sato, it ran for a long time and had a build failure similar to the first one on kexec-tools. I did the bitbake -c cleansstate kexec-tools trick again and restarted bitbake core-image-sato. Not sure why this is, but it seems to work.

These errors should not happen - you should be able to update the yocto meta-data and rebuild an image any time and not suffer such problems.

Did you change anything else, especially with your host tools, between the time your previous build completed and you did this pull and rebuild? For example, running the Ubuntu package updater?

Quoted 68 lines · jfabernathy

Quoted 67 lines · Gary Thomas

Quoted 65 lines · jfabernathy

Quoted 39 lines · Gary Thomas

Quoted 38 lines · jfabernathy

Quoted 37 lines · Gary Thomas

Quoted 36 lines · jfabernathy

Quoted 27 lines · Gary Thomas

Quoted 23 lines · jfabernathy

Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
------------------

NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 Log data follows:

| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
| NOTE: make -j 8
| make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| Making sources for autoconf
| make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
`glapi_dispatch.o'. Stop.
| make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
| make[1]: *** [subdirs] Error 1
| make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
| make: *** [default] Error 1
| ERROR: oe_runmake failed

Quoted 2 lines

NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'

Quoted 6 lines

What's your build host?

Was this build from scratch? There was a discussion of much the same error on the meta-ti list last week where the host GCC was updated between two subsequent builds that gave this error.

Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)

Quoted 8 lines

Quoted 6 lines

Quoted 5 lines

Quoted 2 lines

gcc is 4.6.1

Was your build from scratch? Do you use [extant] sstate cache?

I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

No to question on rm_work in local.conf

Quoted 4 lines

Try this:
% bitbake -c cleansstate mesa-dri
% bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see if it completes.

Quoted 7 lines

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much
- images don't have much (any?)
stuff that needs to get cleaned. You can run 'bitbake core-image-sato' as many times as you like and it will completely rebuild the image every time.

So if I do a git pull and want to retest with new stuff, just bitbake core-image-sato or should I do something with cleansstate??

Quoted 7 lines

Quoted 4 lines

If you run just 'bitbake core-image-sato', any packages (recipes) which have been changed that are used by the image will be rebuilt. You should not have to clean anything for this to work properly.

After I fixed mesa-dri and started bitbake core-image-sato, it ran for a long time and had a build failure similar to the first one on kexec-tools. I did the bitbake -c cleansstate kexec-tools trick again and restarted bitbake core-image-sato. Not sure why this is, but it seems to work.

These errors should not happen - you should be able to update the yocto meta-data and rebuild an image any time and not suffer such problems.

Did you change anything else, especially with your host tools, between the time your previous build completed and you did this pull and rebuild? For example, running the Ubuntu package updater?