Skip to contentSkip to conversation

ARM: OMAP3: pandora: re-enable NAND soft ECC

PATCH New Grazvydas Ignotas 2 participants 3 messages Mar 19, 2012

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: OMAP3: pandora: re-enable NAND soft ECC

Commin 4fee6c2f295f9 "nand: make 1-bit software ECC configurable" disabled software ECC by default, but pandora always used (and still does use) software ECC to store it's firmware, so enable it in board file.

---
 include/configs/omap3_pandora.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/omap3_pandora.h +1 -0
index 4df5f5d..492b5e1 100644
@@ -154,6 +154,7 @@
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_ECC_SOFT
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 ARM: OMAP3: pandora: re-enable NAND soft ECC

Quoted 6 lines · Grazvydas Ignotas

Commin 4fee6c2f295f9 "nand: make 1-bit software ECC configurable" disabled software ECC by default, but pandora always used (and still does use) software ECC to store it's firmware, so enable it in board file.

This is an artifact of u-boot-arm (and thus u-boot-ti) being behind u-boot/master. The change that requires this change has been reverted.

Signature · 1 line
Tom
#2 lore raw

PATCH 1/1 ARM: OMAP3: pandora: re-enable NAND soft ECC

Quoted 7 lines · Tom Rini
Quoted 6 lines · Grazvydas Ignotas

Commin 4fee6c2f295f9 "nand: make 1-bit software ECC configurable" disabled software ECC by default, but pandora always used (and still does use) software ECC to store it's firmware, so enable it in board file.

Quoted 5 lines
Quoted 1 line

This is an artifact of u-boot-arm (and thus u-boot-ti) being behind u-boot/master. ?The change that requires this change has been reverted.

Thanks for the info, I don't follow u-boot development that closely..

Signature · 1 line
Gra?vydas