Pull request for branch for-2012.05/systemd

index 85583c6..623c79a 100644
@@ -577,6 +577,7 @@ source "package/rsyslog/Config.in"
 source "package/sysklogd/Config.in"
 source "package/sysvinit/Config.in"
 endif
+source "package/systemd/Config.in"
 source "package/util-linux/Config.in"
 source "package/dsp-tools/Config.in"
 endmenu

index e18e291..0942b33 100644
@@ -39,6 +39,10 @@ else
 DBUS_CONF_OPT += --without-x
 endif
 
+ifeq ($(BR2_PACKAGE_SYSTEMD),y)
+DBUS_CONF_OPT += --with-systemdsystemunitdir=/lib/systemd/system
+endif
+
 # fix rebuild (dbus makefile errors out if /var/lib/dbus is a symlink)
 define DBUS_REMOVE_VAR_LIB_DBUS
 	rm -rf $(TARGET_DIR)/var/lib/dbus

new file mode 100644
index 0000000..d114ddd
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_SYSTEMD
+	bool "systemd"
+	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	select BR2_PACKAGE_DBUS
+	select BR2_PACKAGE_LIBCAP
+	help
+	  systemd is a system and service manager for Linux, compatible with
+	  SysV and LSB init scripts. systemd provides aggressive parallelization
+	  capabilities, uses socket and D-Bus activation for starting services,
+	  offers on-demand starting of daemons, keeps track of processes using
+	  Linux cgroups, supports snapshotting and restoring of the system
+	  state, maintains mount and automount points and implements an
+	  elaborate transactional dependency-based service control logic.
+	  It can work as a drop-in replacement for sysvinit.
+
+	  http://freedesktop.org/wiki/Software/systemd
+
+comment "systemd not available (depends on udev)"
+	depends on !BR2_PACKAGE_UDEV

new file mode 100644
index 0000000..211fb4d
@@ -0,0 +1,26 @@
+Index: systemd-37/units/getty at .service.m4
+===================================================================
+--- systemd-37.orig/units/getty at .service.m4	2012-03-21 10:05:23.868674099 +0100
++++ systemd-37/units/getty at .service.m4	2012-03-21 10:06:50.332671834 +0100
+@@ -32,7 +32,7 @@
+ 
+ [Service]
+ Environment=TERM=linux
+-ExecStart=-/sbin/agetty %I 38400
++ExecStart=-/sbin/getty -L %I 115200 vt100
+ Restart=always
+ RestartSec=0
+ UtmpIdentifier=%I
+Index: systemd-37/units/serial-getty at .service.m4
+===================================================================
+--- systemd-37.orig/units/serial-getty at .service.m4	2012-03-21 10:07:05.176671445 +0100
++++ systemd-37/units/serial-getty at .service.m4	2012-03-21 10:07:21.580671015 +0100
+@@ -32,7 +32,7 @@
+ 
+ [Service]
+ Environment=TERM=vt100
+-ExecStart=-/sbin/agetty -s %I 115200,38400,9600
++ExecStart=-/sbin/getty -L %I 115200 vt100
+ Restart=always
+ RestartSec=0
+ UtmpIdentifier=%I

62 lines not on this page · raw message

index d445a2f..ed41511 100644
@@ -35,6 +35,10 @@ UDEV_CONF_OPT +=		\
 	--disable-gudev
 endif
 
+ifeq ($(BR2_PACKAGE_SYSTEMD),y)
+	UDEV_CONF_OPT += --with-systemdsystemunitdir=/lib/systemd/system/
+endif
+
 define UDEV_INSTALL_INITSCRIPT
 	$(INSTALL) -m 0755 package/udev/S10udev $(TARGET_DIR)/etc/init.d/S10udev
 endef

index 6cb1efc..93dd008 100644
@@ -163,6 +163,8 @@ define LINUX_CONFIGURE_CMDS
 	$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),
 		$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(@D)/.config))
 	yes '' | $(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) oldconfig
+	$(if $(BR2_PACKAGE_SYSTEMD),
+		$(call KCONFIG_ENABLE_OPT,CONFIG_CGROUPS,$(@D)/.config))
 endef
 
 # Compilation. We make sure the kernel gets rebuilt when the

index f7b6566..3992247 100644
@@ -427,6 +427,10 @@ $(BUILD_DIR)/%/.stamp_images_installed:
 # Install to target dir
 $(BUILD_DIR)/%/.stamp_target_installed:
 	@$(call MESSAGE,"Installing to target")
+	$(if $(BR2_INIT_SYSTEMD),\
+		$($(PKG)_INSTALL_INIT_SYSTEMD))
+	$(if $(BR2_INIT_SYSV)$(BR2_INIT_BUSYBOX),\
+		$($(PKG)_INSTALL_INIT_SYSV))
 	$($(PKG)_INSTALL_TARGET_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
 	$(Q)touch $@

@@ -445,6 +449,10 @@ $(BUILD_DIR)/%/.stamp_uninstalled:
 	rm -f $($(PKG)_TARGET_INSTALL_TARGET)
 	$($(PKG)_UNINSTALL_STAGING_CMDS)
 	$($(PKG)_UNINSTALL_TARGET_CMDS)
+	$(if $(BR2_INIT_SYSTEMD),\
+		$($(PKG)_UNINSTALL_INIT_SYSTEMD))
+	$(if $(BR2_INIT_SYSV)$(BR2_INIT_BUSYBOX),\
+		$($(PKG)_UNINSTALL_INIT_SYSV))
 
 # Remove package sources
 $(BUILD_DIR)/%/.stamp_dircleaned:

index 34ec391..d91c643 100644
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_SYSVINIT
 	bool "sysvinit"
+	depends on BR2_INIT_SYSV
 	help
 	  /sbin/init - parent of all processes
 

index 88f0718..40009bd 100644
@@ -37,6 +37,34 @@ comment "udev requires a toolchain with LARGEFILE + WCHAR support"
 
 endchoice
 
+choice
+	prompt "Init system"
+	default BR2_INIT_BUSYBOX
+	help
+	  To select systemd, you first need to have dbus and udev enabled
+
+config BR2_INIT_BUSYBOX
+	bool "Busybox init"
+	select BR2_PACKAGE_BUSYBOX
+
+config BR2_INIT_SYSV
+	bool "Use systemV init"
+	select BR2_PACKAGE_SYSVINIT
+
+config BR2_INIT_SYSTEMD
+	bool "Use systemd"
+	depends on BR2_LARGEFILE
+	depends on BR2_USE_WCHAR
+	depends on BR2_INET_IPV6
+	select BR2_PACKAGE_DBUS
+	select BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	select BR2_PACKAGE_SYSTEMD
+
+comment 'systemd requires largefile, wchar and IPv6 support'
+	depends on !(BR2_LARGEFILE && BR2_USE_WCHAR && BR2_INET_IPV6)
+
+endchoice
+
 config BR2_ROOTFS_DEVICE_TABLE
 	string "Path to the permission tables"
 	default "target/generic/device_table.txt"

new file mode 100644
index 0000000..76afbf8
@@ -0,0 +1,64 @@
+Index: lighttpd-1.4.30/doc/config/lighttpd.conf
+===================================================================
+--- lighttpd-1.4.30.orig/doc/config/lighttpd.conf	2011-12-18 13:57:25.000000000 +0100
++++ lighttpd-1.4.30/doc/config/lighttpd.conf	2012-03-22 09:55:31.402424839 +0100
+@@ -13,7 +13,7 @@
+ ## if you add a variable here. Add the corresponding variable in the
+ ## chroot example aswell.
+ ##
+-var.log_root    = "/var/log/lighttpd"
++var.log_root    = "/var/log"
+ var.server_root = "/srv/www"
+ var.state_dir   = "/var/run"
+ var.home_dir    = "/var/lib/lighttpd"
+@@ -90,7 +90,7 @@
+ ##
+ ## Use IPv6?
+ ##
+-server.use-ipv6 = "enable"
++# server.use-ipv6 = "enable"
+ 
+ ##
+ ## bind to a specific IP
+@@ -101,8 +101,8 @@
+ ## Run as a different username/groupname.
+ ## This requires root permissions during startup. 
+ ##
+-server.username  = "lighttpd"
+-server.groupname = "lighttpd"
++# server.username  = "lighttpd"
++# server.groupname = "lighttpd"
+ 
+ ## 
+ ## enable core files.
+@@ -138,7 +138,7 @@
+ ##
+ ## Path to the error log file
+ ##
+-server.errorlog             = log_root + "/error.log"
++server.errorlog             = log_root + "/lighttpd-error.log"
+ 
+ ##
+ ## If you want to log to syslog you have to unset the 
+@@ -188,7 +188,7 @@
+ ## linux-sendfile - is recommended for small files.
+ ## writev         - is recommended for sending many large files
+ ##
+-server.network-backend = "linux-sendfile"
++server.network-backend = "writev"
+ 
+ ##
+ ## As lighttpd is a single-threaded server, its main resource limit is
+@@ -311,9 +311,9 @@
+ ## disable range requests for pdf files
+ ## workaround for a bug in the Acrobat Reader plugin.
+ ##
+-$HTTP["url"] =~ "\.pdf$" {
+-  server.range-requests = "disable"
+-}
++# $HTTP["url"] =~ "\.pdf$" {
++#  server.range-requests = "disable"
++# }
+ 
+ ##
+ ## url handling modules (rewrite, redirect)

index b8aa310..8d1f212 100644
@@ -56,6 +56,38 @@ else
 LIGHTTPD_CONF_OPT += --without-lua
 endif
 
+define LIGHTTPD_INSTALL_CONFIG
+	mkdir -p $(TARGET_DIR)/etc/lighttpd
+	mkdir -p $(TARGET_DIR)/etc/lighttpd/conf.d
+	mkdir -p $(TARGET_DIR)/srv/www/htdocs
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/lighttpd.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/lighttpd.conf \
+			$(TARGET_DIR)/etc/lighttpd/lighttpd.conf
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/modules.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/modules.conf \
+			$(TARGET_DIR)/etc/lighttpd/modules.conf
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/conf.d/access_log.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/conf.d/access_log.conf \
+			$(TARGET_DIR)/etc/lighttpd/conf.d/access_log.conf
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/conf.d/debug.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/conf.d/debug.conf \
+			$(TARGET_DIR)/etc/lighttpd/conf.d/debug.conf
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/conf.d/dirlisting.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/conf.d/dirlisting.conf \
+			$(TARGET_DIR)/etc/lighttpd/conf.d/dirlisting.conf
+
+	[ -f $(TARGET_DIR)/etc/lighttpd/conf.d/mime.conf ] || \
+		$(INSTALL) -D -m 755 $(@D)/doc/config/conf.d/mime.conf \
+			$(TARGET_DIR)/etc/lighttpd/conf.d/mime.conf
+endef
+
+LIGHTTPD_POST_INSTALL_TARGET_HOOKS += LIGHTTPD_INSTALL_CONFIG
+
 define LIGHTTPD_UNINSTALL_TARGET_CMDS
 	rm -f $(TARGET_DIR)/usr/sbin/lighttpd
 	rm -f $(TARGET_DIR)/usr/sbin/lighttpd-angel

index 8d1f212..1f2f283 100644
@@ -88,6 +88,17 @@ endef
 
 LIGHTTPD_POST_INSTALL_TARGET_HOOKS += LIGHTTPD_INSTALL_CONFIG
 
+define LIGHTTPD_INSTALL_INIT_SYSTEMD
+	[ -f $(TARGET_DIR)/etc/systemd/system/lighttpd.service ] || \
+		$(INSTALL) -D -m 755 package/lighttpd/lighttpd.service \
+			$(TARGET_DIR)/etc/systemd/system/lighttpd.service
+
+	mkdir -p $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants
+
+	ln -fs ../lighttpd.service \
+		$(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/lighttpd.service
+endef
+
 define LIGHTTPD_UNINSTALL_TARGET_CMDS
 	rm -f $(TARGET_DIR)/usr/sbin/lighttpd
 	rm -f $(TARGET_DIR)/usr/sbin/lighttpd-angel

new file mode 100644
index 0000000..0ca5357
@@ -0,0 +1,10 @@
+[Unit]
+Description=Lighttpd Web Server
+After=network.target
+
+[Service]
+ExecStart=/usr/sbin/lighttpd-angel -f /etc/lighttpd/lighttpd.conf -D
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target