Skip to contentSkip to conversation

force fdr link to 10gb

DISCUSSION Bob Ciotti 2 participants 3 messages Apr 21, 2012 2 messages not in the archive InfiniBand

lore
Share & tools
lore

Bob Ciotti

author
#0 lore raw

I'm trying to change the capability on an FDR port to run at most at QDR speeds (force a 14 port to 10). I've tried various ibportstate (speed/espeed) commands and can't locate any documentation on the specifics. Looks like LinkSpeedExtEnabled wants to be set to 0? Thanks for any pointers/help. Bob

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 5 lines · Bob Ciotti

I'm trying to change the capability on an FDR port to run at most at QDR speeds (force a 14 port to 10).
I've tried various ibportstate (speed/espeed) commands and can't locate any documentation
on the specifics. Looks like LinkSpeedExtEnabled wants to be set to 0?

0 is no state change. 30 means Disable extended link speeds.

-- Hal

Quoted 7 lines

Thanks for any pointers/help. Bob

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 4F9293DA.9080507-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org

author
#4 lore raw

OK - I found it in the management eratta. thx - bob

Quoted 7 lines · Hal Rosenstock
Quoted 5 lines · Bob Ciotti

I'm trying to change the capability on an FDR port to run at most at QDR speeds (force a 14 port to 10).
I've tried various ibportstate (speed/espeed) commands and can't locate any documentation
on the specifics. Looks like LinkSpeedExtEnabled wants to be set to 0?

Quoted 12 lines

0 is no state change. 30 means Disable extended link speeds.

-- Hal

Quoted 7 lines

Thanks for any pointers/help. Bob

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html