Skip to contentSkip to conversation

LCD: change s6e8ax0 panel gamma value

PATCH New Donghwa Lee 2 participants 3 messages Apr 25, 2012 – May 24, 2012 Framebuffer layer

lore
Share & tools
lore

Donghwa Lee

author
#0 lore raw

PATCH 1/1 LCD: change s6e8ax0 panel gamma value

s6e8ax0 panel init gamma value is changed because existing it was not proper value for this panel.

Signed-off-by Donghwa Lee <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
Signed-off-by Inki Dae <[email protected]>
---
 drivers/video/s6e8ax0.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/video/s6e8ax0.c +4 -4
index 1ec7fd6..02c5ccf 100644
@@ -55,11 +55,11 @@ static void s6e8ax0_display_cond(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	/* 7500K 2.2 Set (M3, 300cd) */
+	/* 7500K 2.2 Set : 30cd */
 	const unsigned char data_to_send[] = {
-		0xfa, 0x01, 0x0f, 0x00, 0x0f, 0xda, 0xc0, 0xe4, 0xc8,
-		0xc8, 0xc6, 0xd3, 0xd6, 0xd0, 0xab, 0xb2, 0xa6, 0xbf,
-		0xc2, 0xb9, 0x00, 0x93, 0x00, 0x86, 0x00, 0xd1
+		0xfa, 0x01, 0x60, 0x10, 0x60, 0xf5, 0x00, 0xff, 0xad,
+		0xaf, 0xba, 0xc3, 0xd8, 0xc5, 0x9f, 0xc6, 0x9e, 0xc1,
+		0xdc, 0xc0, 0x00, 0x61, 0x00, 0x5a, 0x00, 0x74,
 	};
 
 	ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE,
Signature · 1 line
1.7.4.1
#1 lore raw

PATCH 1/1 LCD: change s6e8ax0 panel gamma value

Hi,

Quoted 9 lines · On Wed, 25 Apr 2012 17:04:39 +0900 Donghwa Lee <[email protected]> wrote:

s6e8ax0 panel init gamma value is changed because existing it was not proper value for this panel.

Signed-off-by Donghwa Lee <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
Signed-off-by Inki Dae <[email protected]>
---
 drivers/video/s6e8ax0.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

Looks good. I'll apply this patch after the u-boot-samsung tree merge. Thanks!

Anatolij

#2 lore raw

PATCH 1/1 LCD: change s6e8ax0 panel gamma value

In reply to Donghwa Lee

Hi,

Quoted 9 lines · On Wed, 25 Apr 2012 17:04:39 +0900 Donghwa Lee <[email protected]> wrote:

s6e8ax0 panel init gamma value is changed because existing it was not proper value for this panel.

Signed-off-by Donghwa Lee <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
Signed-off-by Inki Dae <[email protected]>
---
 drivers/video/s6e8ax0.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

Applied to u-boot-video/master. Thanks!

Anatolij