BeagleBone: new board
PATCH v3 1/1 BeagleBone: new board
This configuration provides a basic setup for using Buildroot to create all of the images needed for a BeagleBone.
Signed-off-by Frank Hunleth <[email protected]>
--- board/beaglebone/linux-3.2.9.config | 252 ++++++++++++++++++++ ....h-Specify-ext2-and-ro-for-booting-rootfs.patch | 31 +++ configs/beaglebone_defconfig | 25 ++ 3 files changed, 308 insertions(+), 0 deletions(-) create mode 100644 board/beaglebone/linux-3.2.9.config create mode 100644 board/beaglebone/uboot-v2011.09_AM335xPSP_04.06.00.06-0001-am335x_evm.h-Specify-ext2-and-ro-for-booting-rootfs.patch create mode 100644 configs/beaglebone_defconfig
board/beaglebone/linux-3.2.9.config new file +252 -0
@@ -0,0 +1,252 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="beaglebone" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_FHANDLE=y +CONFIG_SPARSE_IRQ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_ARCH_OMAP=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MBOX_FWK=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_MACH_OMAP_GENERIC is not set +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP4 is not set +# CONFIG_SOC_OMAP3430 is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_DEVKIT8000 is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP3530_LV_SOM is not set +# CONFIG_MACH_OMAP3_TORPEDO is not set +# CONFIG_MACH_ENCORE is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP3_TOUCHBOOK is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RM680 is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_CM_T3517 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_IGEP0030 is not set +# CONFIG_MACH_SBC3530 is not set +# CONFIG_MACH_OMAP_3630SDP is not set +# CONFIG_MACH_TI8168EVM is not set +# CONFIG_MACH_TI8148EVM is not set +# CONFIG_MACH_AM335XIAEVM is not set +CONFIG_OMAP3_EDMA=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_THUMB2_KERNEL=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +CONFIG_AUTO_ZRELADDR=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_BINFMT_MISC=y +# CONFIG_SUSPEND is not set +CONFIG_PM_DEBUG=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_RFKILL_REGULATOR=m +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_CONNECTOR=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_MISC_DEVICES=y +CONFIG_BMP085=m +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_93CX6=m +CONFIG_SENSORS_LIS3_I2C=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_TI_CPSW=y +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_TWL4030_VIBRA=m +CONFIG_INPUT_TWL6040_VIBRA=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_PCF8574=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +# CONFIG_SERIO is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_HW_RANDOM=y +CONFIG_RAW_DRIVER=m +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_GPIO=m +CONFIG_SPI_OMAP24XX=y +CONFIG_SPI_SPIDEV=m +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_TWL4030=y +CONFIG_GENERIC_PWM=y +CONFIG_DAVINCI_EHRPWM=y +CONFIG_ECAP_PWM=y +CONFIG_POWER_SUPPLY=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_TPS65217=y +CONFIG_REGULATOR_DUMMY=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_DISPLAY_SUPPORT=y +CONFIG_HIDRAW=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_TI81XX_GLUE=y +CONFIG_USB_TI_CPPI41_DMA_HW=y +CONFIG_USB_ACM=y +CONFIG_USB_LIBUSUAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_HID=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_PRUSS=m +CONFIG_STAGING=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +CONFIG_IIO_SW_RING=y +CONFIG_IIO_KFIFO_BUF=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PM_DEVFREQ=y +CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_FANOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_JTAG_ENABLE=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set
board/beaglebone/uboot-v2011.09_AM335xPSP_04.06.00.06-0001-am335x_evm.h-Specify-ext2-and-ro-for-booting-rootfs.patch new file +31 -0
@@ -0,0 +1,31 @@ +From c8aae8c96494132759319b0eab6cd2a51d1d4889 Mon Sep 17 00:00:00 2001 +From: Frank Hunleth <[email protected]> +Date: Tue, 6 Mar 2012 07:20:26 -0800 +Subject: [PATCH] am335x_evm.h: Specify ext2 and ro for booting rootfs + +Signed-off-by: Frank Hunleth <[email protected]> +--- + include/configs/am335x_evm.h | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index e0ac494..b45c306 100755 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -53,11 +53,11 @@ + "script_addr=0x81900000\0" \ + "console=ttyO0,115200n8\0" \ + "mmc_dev=0\0" \ +- "mmc_root=/dev/mmcblk0p2 rw\0" \ ++ "mmc_root=/dev/mmcblk0p2 ro\0" \ + "nand_root=ubi0:rootfs rw ubi.mtd=7,2048\0" \ + "spi_root=/dev/mtdblock4 rw\0" \ + "nor_root=/dev/mtdblock3 rw\0" \ +- "mmc_root_fs_type=ext3 rootwait\0" \ ++ "mmc_root_fs_type=ext2 rootwait\0" \ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "spi_root_fs_type=jffs2\0" \ + "nor_root_fs_type=jffs2\0" \ +-- +1.7.4.1 +
configs/beaglebone_defconfig new file +25 -0
@@ -0,0 +1,25 @@ +BR2_arm=y +BR2_cortex_a8=y +BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard" +# BR2_SOFT_FLOAT is not set +BR2_TARGET_GENERIC_HOSTNAME="beaglebone" +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" +# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="am335x_evm" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/beaglebone" +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://arago-project.org/git/projects/u-boot-am33x.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="v2011.09_AM335xPSP_04.06.00.06" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="MLO" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
Signature · 1 line
1.7.0.4
PATCH v3 1/1 BeagleBone: new board
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Frank" == Frank Hunleth <[email protected]> writes:
Frank> This configuration provides a basic setup for using Buildroot Frank> to create all of the images needed for a BeagleBone.
Committed, thanks!
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/1 BeagleBone: new board
Am 07.05.2012 21:44, schrieb Peter Korsgaard:
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Frank" == Frank Hunleth <[email protected]> writes:
Frank> This configuration provides a basic setup for using Buildroot Frank> to create all of the images needed for a BeagleBone.
Committed, thanks!
Cool, thanks, this comes at the right time;-)
Cheers
Stephan
Signature · 4 lines
reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de
PATCH v3 1/1 BeagleBone: new board
In reply to Frank HunlethHi Frank,
thanks for the patch. I now have a working kernel.
Quoted 1 line
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
What about using http instead of git? If I make it in the office the whole LAN becomes totally lame and it is also good for proxy protected environments.
One more issue having nothing to do with the patch itself. I cannot compile it with the latest Linaro toolchain. it complains about not having some assembly functions. With BR generated toolchain everything is working as expected.
Yegor
PATCH v3 1/1 BeagleBone: new board
Hi Yegor,
Quoted 9 lines · Yegor Yefremov
Hi Frank,
thanks for the patch. I now have a working kernel.
Quoted 1 line
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
What about using http instead of git? If I make it in the office the whole LAN becomes totally lame and it is also good for proxy protected environments.
Sigh. I actually just had a similar experience yesterday. My only issue with http is that it feels sooo slow. Is there any way to improve the speed? Other than that, switching all of the git urls to http urls seems like a good idea. Maybe it's worthwhile anyway?
Quoted 5 lines
One more issue having nothing to do with the patch itself. I cannot compile it with the latest Linaro toolchain. it complains about not having some assembly functions. With BR generated toolchain everything is working as expected.
I haven't tried Linaro yet. I had been trying CodeSourcery toolchains, but gave up when none of the kernels that it produced would boot.
Frank