Skip to contentSkip to conversation

xhci: Clean up reset function

PATCH In review Jan Kiszka 2 participants 2 messages May 11, 2012

lore
Share & tools
lore

Jan Kiszka

author
#0 lore raw

PATCH 1/1 xhci: Clean up reset function

Properly register reset function via the device class.

---

Broken out from the MSI series where I will no longer touch xhci.

 hw/usb/hcd-xhci.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
hw/usb/hcd-xhci.c +4 -5
index 5cf1a64..4bc1e0e 100644
@@ -2296,9 +2296,9 @@ static void xhci_update_port(XHCIState *xhci, XHCIPort *port, int is_detach)
     }
 }
 
-static void xhci_reset(void *opaque)
+static void xhci_reset(DeviceState *dev)
 {
-    XHCIState *xhci = opaque;
+    XHCIState *xhci = DO_UPCAST(XHCIState, pci_dev.qdev, dev);
     int i;
 
     DPRINTF("xhci: full reset\n");
@@ -2506,7 +2506,7 @@ static void xhci_oper_write(XHCIState *xhci, uint32_t reg, uint32_t val)
         }
         xhci->usbcmd = val & 0xc0f;
         if (val & USBCMD_HCRST) {
-            xhci_reset(xhci);
+            xhci_reset(&xhci->pci_dev.qdev);
         }
         xhci_irq_update(xhci);
         break;
@@ -2831,8 +2831,6 @@ static void usb_xhci_init(XHCIState *xhci, DeviceState *dev)
     for (i = 0; i < MAXSLOTS; i++) {
         xhci->slots[i].enabled = 0;
     }
-
-    qemu_register_reset(xhci_reset, xhci);
 }
 
 static int usb_xhci_initfn(struct PCIDevice *dev)
@@ -2895,6 +2893,7 @@ static void xhci_class_init(ObjectClass *klass, void *data)
 
     dc->vmsd    = &vmstate_xhci;
     dc->props   = xhci_properties;
+    dc->reset   = xhci_reset;
     k->init         = usb_xhci_initfn;
     k->vendor_id    = PCI_VENDOR_ID_NEC;
     k->device_id    = PCI_DEVICE_ID_NEC_UPD720200;
Signature · 1 line
1.7.3.4
#1 lore raw
Quoted 1 line · Jan Kiszka

Properly register reset function via the device class.

Patch added to usb patch queue.

thanks,
Gerd