identify i2c
Quoted 7 lines
# decode-dimms # decode-dimms version 5929 (2011-02-16 14:58:38 +0100)Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, Jean Delvare, Trent Piepho and others
No EEPROM found, are you sure the eeprom module is loaded?
How do I find out what to configure in a 3.4 kernel?
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · James
Quoted 7 lines
# decode-dimms # decode-dimms version 5929 (2011-02-16 14:58:38 +0100)Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, Jean Delvare, Trent Piepho and others
No EEPROM found, are you sure the eeprom module is loaded?How do I find out what to configure in a 3.4 kernel?
CONFIG_I2C=yCONFIG_EEPROM_LEGACY=m
Plus CONFIG_I2C_<your I2C bus driver>=m. "lspci | grep SMBus" etc. might tell you which it is.
Signature · 1 line
Jean Delvare
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Jean Delvare
Quoted 8 lines · James
Quoted 7 lines
# decode-dimms # decode-dimms version 5929 (2011-02-16 14:58:38 +0100)Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, Jean Delvare, Trent Piepho and others
No EEPROM found, are you sure the eeprom module is loaded?
Quoted 8 lines
Quoted 1 line
How do I find out what to configure in a 3.4 kernel?
CONFIG_I2C=yCONFIG_EEPROM_LEGACY=mPlus CONFIG_I2C_<your I2C bus driver>=m. "lspci | grep SMBus" etc. might tell you which it is.
How do I find CONFIG_EEPROM_LEGACY in menuconfig?
I manually changed it in .config :-)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 12 lines · James
Quoted 11 lines · Jean Delvare
Quoted 9 lines · James
Quoted 7 lines
# decode-dimms # decode-dimms version 5929 (2011-02-16 14:58:38 +0100)Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, Jean Delvare, Trent Piepho and others
No EEPROM found, are you sure the eeprom module is loaded?How do I find out what to configure in a 3.4 kernel?
Quoted 8 lines
Quoted 6 lines
CONFIG_I2C=yCONFIG_EEPROM_LEGACY=mPlus CONFIG_I2C_<your I2C bus driver>=m. "lspci | grep SMBus" etc. might tell you which it is.
How do I find
CONFIG_EEPROM_LEGACYin menuconfig?
You run "make menuconfig" then type /EEPROM_LEGACY<Enter>, it will tell you where it is.
Quoted 1 line
I manually changed it in .config :-)
Signature · 1 line
Jean Delvare