Skip to contentSkip to conversation

gstreamer-vaapi does not work with g45

DISCUSSION Niccolò Belli 3 participants 10 messages May 26, 2012 – May 30, 2012

lore
Share & tools
lore
#0 lore raw

Hi,
OS is Gentoo amd64 and my laptop is a Samsung X360 (so gm45).
I'm using x11-libs/libva git (g45-h264 branch) and x11-libs/libva-intel-driver bit (g45-h264 branch).

media-libs/gstreamer-0.10.36
media-libs/gst-plugins-base-0.10.36
media-libs/gst-plugins-bad-0.10.23

Using media-plugins/gst-plugins-vaapi git.

Also using:
linux 3.4.0-rt7 (realtime patchset)
libdrm git
x11-drivers/xf86-video-intel-2.19.0 (sna off, vaapi is much slower with sna on) media-libs/mesa-8.0.2
x11-base/xorg-server-1.12.1.902
"SwapbuffersWait" "off"
"vblank_mode" value="0"
kwin desktop effects off

vaapi h264 works flawlessly with mplayer:

mplayer -vo vaapi -va vaapi test.mkv MPlayer SVN-r33094-4.5.3 (C) 2000-2011 MPlayer Team

Riproduco test.mkv.
Rilevato formato file libavformat!
[matroska,webm @ 0x335a580] Estimating duration from bitrate, this may be inaccurate [lavf] stream 0: video (h264), -vid 0, test.mkv
[lavf] stream 1: audio (ac3), -aid 0, -alang eng, AC3 5.1 channels, 640kbps
VIDEO: [H264] 1920x1080 0bpp 24.000 fps 0.0 kbps ( 0.0 kbyte/s)
Informazioni file multimediale:
title: test.mkv
Load subtitles in ./
libva: libva version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib64/va/drivers/i965_drv_video.so
libva: va_openDriver() returns 0
==========================================================================
Apertura decoder video: [ffmpeg] FFmpeg's libavcodec codec family [VD_FFMPEG] VA API accelerated codec.
Scelto codec video: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Apertura decoder audio: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 640.0 kbit/41.67% (ratio: 80000->192000) Scelto codec audio: [ffac3] afm: ffmpeg (FFmpeg AC-3)
==========================================================================

Unfortunately it doesn't work with gstreamer-vaapi:

niko@laptop ~ $ dragon test.mkv
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::begin: Paint device returned engine == 0, type: 2
No accelerated IMDCT transform found
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::begin: Paint device returned engine == 0, type: 2
libva: libva version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib64/va/drivers/i965_drv_video.so
libva: va_openDriver() returns 0
dragon: i965_avc_bsd.c:337: i965_avc_bsd_slice_state: Assertion `frame_idx < (sizeof(i965_h264_context->fsid_list) / sizeof((i965_h264_context->fsid_list)[0]))' failed.
KCrash: Application 'dragon' crashing...
KCrash: Attempting to start /usr/lib64/kde4/libexec/drkonqi from kdeinit
sock_file=/home/niko/.kde4/socket-laptop/kdeinit4__0
dragon: Fatal IO error: client killed

[1]+ Stopped dragon test.mkv

While with gst-launch I get:

niko@laptop ~ $ gst-launch-0.10 -v filesrc location=test.mkv ! matroskademux ! vaapidecode ! vaapisink
Impostazione della pipeline a PAUSED ...
libva: libva version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib64/va/drivers/i965_drv_video.so
libva: va_openDriver() returns 0
La pipeline è in PREROLLING ...
/GstPipeline:pipeline0/GstVaapiDecode:vaapidecode0.GstPad:src: caps = video/x-surface, width=(int)1920, height=(int)1080, framerate=(fraction)5000000/208333, pixel-aspect-ratio=(fraction)1/1, type=(string)vaapi, opengl=(boolean)true
/GstPipeline:pipeline0/GstVaapiDecode:vaapidecode0.GstPad:sink: caps = video/x-h264, level=(string)4.1, profile=(string)high, codec_data=(buffer)01640029ffe1001867640029acd940780227e584000cb73402625a023c60c65801008668e93b3ce5531cc305d2628d13080214868783a1c0d04e12142c0ac0da02fe10042ad35e9e850b748c778a1410088b172105449ca3050e204448b20a4d8a081827090809848541dc4290a43164215a201900cae8340f81e86f03300b6017002ac05981d61a07802a8400a902087404700bc010506e036404b811805902e07203e0087ff858f0, stream-format=(string)avc, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)5000000/208333 gst-launch-0.10: i965_avc_bsd.c:337: i965_avc_bsd_slice_state: Assertion `frame_idx < (sizeof(i965_h264_context->fsid_list) / sizeof((i965_h264_context->fsid_list)[0]))' failed.
Annullato

Hope you can help, no one is going to maintain mplayer-vaapi anymore and there is no hope for mplayer2-vaapi. I also tried vlc with vaapi but it sucks hards (it stutter, you just can't watch a video with vlc and vaapi).

Thanks,
Niccolò

#1 lore raw

Am 26.05.2012 17:05, schrieb Niccolò Belli:

Quoted 1 line

[..] no one is going to maintain mplayer-vaapi anymore [...]

Is this true? I've seen no changes for a long time. I thought maybe maintainers see no need to work on software that does it's job. I would be very sorry if it was really dead.

Greets,
Kiste

#2 lore raw

Il 28/05/2012 08:14, Oliver Seitz ha scritto:

Quoted 3 lines

Is this true? I've seen no changes for a long time. I thought maybe maintainers see no need to work on software that does it's job. I would be very sorry if it was really dead.

No need? What about trying to mainline it for example? :)
Anyway I'm still using mplayer-vaapi-1.0_rc4_p20110322 + smplayer SVN because it's the only viable solution (as I said vlc stutters and gstreamer-vaapi doesn't work at all). I still hope someone will mainline it, maybe even in mplayer2.

Niccolò

P.S.
Is there some kind of vaapi-vdpau wrapper? I'd like to take advantage of Adobe's Flash player acceleration but despite promises it still doesn't support VA-API :(

#3 lore raw

Am 28.05.2012 12:46, schrieb Niccolò Belli:

Quoted 6 lines

Il 28/05/2012 08:14, Oliver Seitz ha scritto:

Quoted 3 lines

Is this true? I've seen no changes for a long time. I thought maybe maintainers see no need to work on software that does it's job. I would be very sorry if it was really dead.

No need? What about trying to mainline it for example? :)

Ok, that's true... But isn't this a decision to be made by the mainline maintainers?

Greets,
Kiste

#4 lore raw

Il 29/05/2012 11:36, Oliver Seitz ha scritto:

Quoted 1 line

But isn't this a decision to be made by the mainline maintainers?

Obviously, but why shouldn't they reject a widely requested feature when the code is mature enough?
By the way, since there are no ebuilds with the latest code available (I still can't believe it) I made my own media-video/mplayer-1.0_rc4_p20120116 ebuild with the vaapi use flag. I will post it as soon as I finish to set up git on my server.

Niccolò

#5 lore raw

Il 29/05/2012 12:54, Niccolò Belli ha scritto:

Quoted 2 lines

Obviously, but why shouldn't they reject a widely requested feature when the code is mature enough?

Err... shouldn't ---> should I'm sorry :)

#6 lore raw
In reply to Niccolò Belli

Il 29/05/2012 12:54, Niccolò Belli ha scritto:

Quoted 4 lines

By the way, since there are no ebuilds with the latest code available (I still can't believe it) I made my own media-video/mplayer-1.0_rc4_p20120116 ebuild with the vaapi use flag. I will post it as soon as I finish to set up git on my server.

As promised:
http://www.linuxsystems.it/2012/05/media-video-mplayer-1-0_rc4_p20120116-with-vaapi-use-flag/

Niccolò

#7 lore raw
In reply to Niccolò Belli
Quoted 5 lines · Niccolò Belli

Il 29/05/2012 11:36, Oliver Seitz ha scritto:

Quoted 1 line

But isn't this a decision to be made by the mainline maintainers?

Quoted 8 lines

Obviously, but why shouldn't they reject a widely requested feature when the code is mature enough?
By the way, since there are no ebuilds with the latest code available (I still can't believe it) I made my own media-video/mplayer-1.0_rc4_p20120116 ebuild with the vaapi use flag. I will post it as soon as I finish to set up git on my server.

Niccolò

fyi, I just filed a request for gstreamer-vaapi yesterday:
https://bugs.gentoo.org/show_bug.cgi?id=418077

The gstreamer maintainers are behind, but I hope they'll get to it soon.

#8 lore raw

Il 30/05/2012 04:39, Matt Turner ha scritto:

Quoted 2 lines

fyi, I just filed a request for gstreamer-vaapi yesterday:
https://bugs.gentoo.org/show_bug.cgi?id=418077

Well done, I opened a bug for this issue too:
https://bugs.freedesktop.org/show_bug.cgi?id=50390

In the meantime you can find a gst-plugins-vaapi ebuild in the openoffice-geki overlay. Unfortunately it's broken, I uploaded a fixed version in my overlay:
http://www.linuxsystems.it/2012/05/gentoo-g45-gm45-h264-vaapi-video-decoding/

Niccolò

#9 lore raw
In reply to Niccolò Belli
Quoted 5 lines
Quoted 2 lines

But isn't this a decision to be made by the mainline maintainers?

Obviously, but why shouldn't they reject a widely requested feature when the code is mature enough?

There was nothing ever rejected, as no patch was ever recieved. So I was told on the MPlayer-users mailing list. MPlayer developers do not crawl the web in search for possible improvements. To get a new feature included in MPlayer, it is best to send a patch to MPlayer-dev-eng list, like it was done with vdpau.

I can't do that, I'm no programmer of the C family of languages. Sorry.

Greets,
Kiste