treewide: Fix likely misuses of | for &
Subsystems (6)
cover treewide: Fix likely misuses of | for &
| with a non-zero constant is always true.
Likely these should have been &.
Joe Perches (4):
mac80211: Fix likely misuse of | for &
can: cc770: Fix likely misuse of | for &
brcmfmac: Fix likely misuse of | for &
usb: gadget: pch_udc: Fix likely misuse of | for &
drivers/net/can/cc770/cc770_platform.c | 2 +- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- drivers/usb/gadget/pch_udc.c | 2 +- net/mac80211/cfg.c | 6 +++--- 4 files changed, 7 insertions(+), 7 deletions(-)
Signature · 1 line
1.7.8.111.gad25c.dirty
PATCH 1/4 mac80211: Fix likely misuse of | for &
Using | with a constant is always true.
Likely this should have be &.
--- net/mac80211/cfg.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
net/mac80211/cfg.c +3 -3
@@ -533,16 +533,16 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy, sinfo.filled =0 ;sta_set_sinfo (sta, &sinfo); -if (sinfo.filled |STATION_INFO_TX_BITRATE ) +if (sinfo.filled &STATION_INFO_TX_BITRATE ) data[i] =100000 *cfg80211_calculate_bitrate (&sinfo.txrate); i++; -if (sinfo.filled |STATION_INFO_RX_BITRATE ) +if (sinfo.filled &STATION_INFO_RX_BITRATE ) data[i] =100000 *cfg80211_calculate_bitrate (&sinfo.rxrate); i++; -if (sinfo.filled |STATION_INFO_SIGNAL_AVG ) +if (sinfo.filled &STATION_INFO_SIGNAL_AVG ) data[i] = (u8 )sinfo.signal_avg; i++; }else {
Signature · 1 line
1.7.8.111.gad25c.dirty
Re: [PATCH 1/4] mac80211: Fix likely misuse of | for &
Quoted 2 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be&.
Yes, I think your change is correct. Looks like something a compiler or static analysis tool could catch and warn about...
Sorry for the bug!
Ben
Quoted 31 lines
cc Ben Greear<[email protected]>Signed-off-by Joe Perches<[email protected]>--- net/mac80211/cfg.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)net/mac80211/cfg.c +3
-3@@ -533,16 +533,16 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy, sinfo.filled =0 ;sta_set_sinfo (sta,&sinfo); -if (sinfo.filled |STATION_INFO_TX_BITRATE ) +if (sinfo.filled&STATION_INFO_TX_BITRATE ) data[i] =100000 *cfg80211_calculate_bitrate (&sinfo.txrate); i++; -if (sinfo.filled |STATION_INFO_RX_BITRATE ) +if (sinfo.filled&STATION_INFO_RX_BITRATE ) data[i] =100000 *cfg80211_calculate_bitrate (&sinfo.rxrate); i++; -if (sinfo.filled |STATION_INFO_SIGNAL_AVG ) +if (sinfo.filled&STATION_INFO_SIGNAL_AVG ) data[i] = (u8 )sinfo.signal_avg; i++; }else {
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
PATCH 2/4 can: cc770: Fix likely misuse of | for &
In reply to Joe PerchesUsing | with a constant is always true.
Likely this should have be &.
--- drivers/net/can/cc770/cc770_platform.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/can/cc770/cc770_platform.c +1 -1
@@ -154,7 +154,7 @@ static int __devinit cc770_get_platform_data(struct platform_device *pdev,struct cc770_platform_data *pdata = pdev->dev.platform_data; priv->can.clock.freq = pdata->osc_freq; -if (priv->cpu_interface |CPUIF_DSC ) +if (priv->cpu_interface &CPUIF_DSC ) priv->can.clock.freq /=2 ; priv->clkout = pdata->cor; priv->bus_config = pdata->bcr;
Signature · 1 line
1.7.8.111.gad25c.dirty
Marc Kleine-Budde
maintainerRe: [PATCH 2/4] can: cc770: Fix likely misuse of | for &
Quoted 4 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be &.Signed-off-by Joe Perches <[email protected]>
Sounds reasonable. And there are no in tree users of the platform driver that this fix could break.
commited to linux-can,
Marc
Quoted 17 lines
--- drivers/net/can/cc770/cc770_platform.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/net/can/cc770/cc770_platform.c +1
-1@@ -154,7 +154,7 @@ static int __devinit cc770_get_platform_data(struct platform_device *pdev,struct cc770_platform_data *pdata = pdev->dev.platform_data; priv->can.clock.freq = pdata->osc_freq; -if (priv->cpu_interface |CPUIF_DSC ) +if (priv->cpu_interface &CPUIF_DSC ) priv->can.clock.freq /=2 ; priv->clkout = pdata->cor; priv->bus_config = pdata->bcr;
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
PATCH 3/4 brcmfmac: Fix likely misuse of | for &
In reply to Joe PerchesUsing | with a constant is always true.
Likely this should have be &.
--- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +2 -2
@@ -89,9 +89,9 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) data |=1 <<SDIO_FUNC_1 |1 <<SDIO_FUNC_2 |1 ;brcmf_sdio_regwb (sdiodev, SDIO_CCCR_IENx, data, &ret); -/* redirect, configure ane enable io for interrupt signal */ +/* redirect, configure and enable io for interrupt signal */ data =SDIO_SEPINT_MASK |SDIO_SEPINT_OE ; -if (sdiodev->irq_flags |IRQF_TRIGGER_HIGH ) +if (sdiodev->irq_flags &IRQF_TRIGGER_HIGH ) data |=SDIO_SEPINT_ACT_HI ;brcmf_sdio_regwb (sdiodev,SDIO_CCCR_BRCM_SEPINT , data, &ret);
Signature · 1 line
1.7.8.111.gad25c.dirty
Re: [PATCH 3/4] brcmfmac: Fix likely misuse of | for &
Quoted 2 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be &.
Quoted 4 lines
Signed-off-by Joe Perches <[email protected]>--- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
PATCH 4/4 usb: gadget: pch_udc: Fix likely misuse of | for &
In reply to Joe PerchesUsing | with a constant is always true.
Likely this should have be &.
--- drivers/usb/gadget/pch_udc.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/usb/gadget/pch_udc.c +1 -1
@@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)return ; }if ((td->status &PCH_UDC_BUFF_STS ) ==PCH_UDC_BS_DMA_DONE ) -if (td->status |PCH_UDC_DMA_LAST ) { +if (td->status &PCH_UDC_DMA_LAST ) { count = td->status &PCH_UDC_RXTX_BYTES ;break ; }
Signature · 1 line
1.7.8.111.gad25c.dirty
Re: [PATCH 4/4] usb: gadget: pch_udc: Fix likely misuse of | for &
Quoted 4 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be &.Signed-off-by Joe Perches <[email protected]>
this looks good to me. Do you want me to carry it on my tree ?
If you want to carry it out as a fix:
Quoted 20 lines
--- drivers/usb/gadget/pch_udc.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/usb/gadget/pch_udc.c +1
-1@@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)return ; }if ((td->status &PCH_UDC_BUFF_STS ) ==PCH_UDC_BS_DMA_DONE ) -if (td->status |PCH_UDC_DMA_LAST ) { +if (td->status &PCH_UDC_DMA_LAST ) { count = td->status &PCH_UDC_RXTX_BYTES ;break ; }Signature · 1 line
1.7.8.111.gad25c.dirty
Signature · 1 line
balbi
Re: [PATCH 4/4] usb: gadget: pch_udc: Fix likely misuse of | for &
Quoted 7 lines · Felipe Balbi
Quoted 3 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be &.Signed-off-by Joe Perches <[email protected]>this looks good to me. Do you want me to carry it on my tree ? If you want to carry it out as a fix:
Acked-by Felipe Balbi <[email protected]>
I presume that question is for Greg.
Re: [PATCH 4/4] usb: gadget: pch_udc: Fix likely misuse of | for &
Quoted 10 lines · Joe Perches
Quoted 7 lines · Felipe Balbi
Quoted 3 lines · Joe Perches
Using | with a constant is always true.
Likely this should have be &.Signed-off-by Joe Perches <[email protected]>this looks good to me. Do you want me to carry it on my tree ? If you want to carry it out as a fix:
Acked-by Felipe Balbi <[email protected]>I presume that question is for Greg.
Then I'll take it... driver/usb/gadget/ goes through me.
Signature · 1 line
balbi