mx53loco: Fix revision of Dialog boards

index dec966d..1db4137 100644
@@ -41,6 +41,7 @@
 #include <fsl_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
+static u32 system_rev;
 
 int dram_init(void)
 {

@@ -62,16 +63,19 @@ void dram_init_banksize(void)
 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
 }
 
-u32 get_board_rev(void)
+u32 get_board_rev_from_fuse(void)
 {
 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
 	struct fuse_bank *bank = &iim->bank[0];
 	struct fuse_bank0_regs *fuse =
 		(struct fuse_bank0_regs *)bank->fuse_regs;
 
-	int rev = readl(&fuse->gp[6]);
+	return readl(&fuse->gp[6]);
+}
 
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
+u32 get_board_rev(void)
+{
+	return system_rev;
 }
 
 static void setup_iomux_uart(void)

@@ -329,6 +333,11 @@ static void setup_iomux_i2c(void)
 		PAD_CTL_ODE_OPENDRAIN_ENABLE);
 }
 
+static inline void setup_board_rev(int rev)
+{
+	system_rev |= (rev & 0xF) << 8;
+}
+
 static int power_init(void)
 {
 	unsigned int val;

@@ -350,6 +359,8 @@ static int power_init(void)
 		/* Set Vcc peripheral to 1.30V */
 		ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
 		ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
+
+		setup_board_rev(0);
 	}
 
 	if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {

@@ -379,6 +390,8 @@ static int power_init(void)
 		/* Set SWBST to 5V in auto mode */
 		val = SWBST_AUTO;
 		ret |= pmic_reg_write(p, SWBST_CTRL, val);
+
+		setup_board_rev(get_board_rev_from_fuse());
 	}
 
 	return ret;

index dec966d..445d022 100644
@@ -71,6 +71,9 @@ u32 get_board_rev(void)
 
 	int rev = readl(&fuse->gp[6]);
 
+	if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR))
+		rev = 0;
+
 	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
 }
 

@@ -424,23 +427,15 @@ int print_cpuinfo(void)
 	return 0;
 }
 
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	setup_iomux_i2c();
-	if (!power_init())
-		clock_1GHz();
-	print_cpuinfo();
-
-	return 0;
-}
-#endif
-
 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 	mxc_set_sata_internal_clock();
+	setup_iomux_i2c();
+	if (!power_init())
+		clock_1GHz();
+	print_cpuinfo();
 
 	return 0;
 }

index eab0e27..1c8ca59 100644
@@ -41,7 +41,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 #define CONFIG_REVISION_TAG