Uprev RPM to 5.4.9

index fbc46c0..eafb34b 100644
@@ -66,24 +66,26 @@ fakeroot rootfs_rpm_do_rootfs () {
 	touch ${INSTALL_ROOTFS_RPM}${rpmlibdir}/log/log.0000000001
 	cat > ${INSTALL_ROOTFS_RPM}${rpmlibdir}/DB_CONFIG << EOF
 # ================ Environment
-set_data_dir            .
-set_create_dir          .
-set_lg_dir              ./log
-set_tmp_dir             ./tmp
+set_data_dir .
+set_create_dir .
+set_lg_dir ./log
+set_tmp_dir ./tmp
+set_flags db_log_autoremove on
 
 # -- thread_count must be >= 8
-set_thread_count        64
+set_thread_count 64
 
 # ================ Logging
 
 # ================ Memory Pool
-set_mp_mmapsize         268435456
+set_cachesize 0 1048576 0
+set_mp_mmapsize 268435456
 
 # ================ Locking
-set_lk_max_locks        16384
-set_lk_max_lockers      16384
-set_lk_max_objects      16384
-mutex_set_max           163840
+set_lk_max_locks 16384
+set_lk_max_lockers 16384
+set_lk_max_objects 16384
+mutex_set_max 163840
 
 # ================ Replication
 EOF

54 lines not on this page · raw message

deleted file mode 100644
index 87a92eb..0000000
@@ -1,35 +0,0 @@
-Upstream-Status: Submitted
-
-From: Qing He <[email protected]>
-Subject: [PATCH] rpm 5.4.0: Fix pointer mishandling
-
-In fpLookupSubdir, data returned by hash should be of type
-"struct rpmffi_s **" instead of "struct rpmffi_s *" to avoid
-segfault.
-
-Signed-off-by: Qing He <[email protected]>
-
-diff --git a/rpmdb/fprint.c b/rpmdb/fprint.c
-index 0e76148..82b8f45 100644
---- a/rpmdb/fprint.c
-+++ b/rpmdb/fprint.c
-@@ -333,7 +333,7 @@ restart:
-     *te = '\0';
- 
-     while (te < se) {
--	struct rpmffi_s * recs;
-+	struct rpmffi_s ** recs;
- 	int numRecs;
- 	int i;
- 
-@@ -346,8 +346,8 @@ restart:
- 	    const char * link;
- 	    int fx;
- 
--	    fx = recs[i].fileno;
--	    fi =  recs[i].p->fi;
-+	    fx = recs[i]->fileno;
-+	    fi =  recs[i]->p->fi;
- 	    flink = fi->flinks[fx];
- 	    if (!(flink && *flink != '\0'))
- 		continue;

443 lines not on this page · raw message

deleted file mode 100644
index 5e93517..0000000
@@ -1,22 +0,0 @@
-Using the version of autoconf in poky results in:
-
-configure.ac:11: error: m4_divert_push: cannot change diversion to `GROW' inside m4_expand
-
-without this patch.
-
-Upstream-Status: Pending
-
-Signed-off-by: Mark Hatle <[email protected]>
-
-diff -ur rpm-5.1.10.orig/configure.ac rpm-5.1.10/configure.ac
---- rpm-5.1.10.orig/configure.ac	2010-08-20 17:12:16.000000000 -0500
-+++ rpm-5.1.10/configure.ac	2010-09-03 11:34:44.722097327 -0500
-@@ -8,7 +8,7 @@
- 
- AC_PREREQ(2.60)
- AC_DEFUN([PACKAGE_BUGREPORT_DEFAULT], [[email protected]])
--AC_INIT(rpm, [5.1.10], [PACKAGE_BUGREPORT_DEFAULT])
-+AC_INIT(rpm, [5.1.10])
- PACKAGE_TIMESTAMP="2008" dnl # YYYY[-MM[-DD[ HH[:MM]]]]
- AC_MSG_TITLE([RPM Package Manager (RPM)], [$PACKAGE_VERSION])
- 

47 lines not on this page · raw message

index e063e86..d9b4e33 100644
@@ -4,16 +4,16 @@ Change cache size to reduce the usage of disk space from 62MB to 26MB.
 
 Signed-off-by: Mei Lei <[email protected]>
 
-diff --git a/rpmdb/DB_CONFIG.in b/rpmdb/DB_CONFIG.in
-index e0b4689..b64e3a9 100644
---- a/rpmdb/DB_CONFIG.in
-+++ b/rpmdb/DB_CONFIG.in
-@@ -29,7 +29,7 @@ set_thread_count	64
+Index: rpm-5.4.8/rpmdb/DB_CONFIG.in
+===================================================================
+--- rpm-5.4.8.orig/rpmdb/DB_CONFIG.in
++++ rpm-5.4.8/rpmdb/DB_CONFIG.in
+@@ -29,7 +29,7 @@ set_thread_count 64
  
  # ================ Memory Pool
  #XXX initializing dbenv with set_cachesize has unimplemented prerequsites
--#set_cachesize		0 1048576 0 
-+set_cachesize		0 1048576 0 
- set_mp_mmapsize		268435456
+-#set_cachesize 0 1048576 0 
++set_cachesize 0 1048576 0 
+ set_mp_mmapsize 268435456
  
  # ================ Locking

index babafb3..4f484c4 100644
@@ -5,11 +5,11 @@ diff --git a/rpmdb/DB_CONFIG.in b/rpmdb/DB_CONFIG.in
 index 8b94c94..e0b4689 100644
 --- a/rpmdb/DB_CONFIG.in
 +++ b/rpmdb/DB_CONFIG.in
-@@ -4,6 +4,7 @@ set_data_dir		.
- set_create_dir		.
- set_lg_dir		./log
- set_tmp_dir		./tmp
-+set_flags 		db_log_autoremove on
+@@ -4,6 +4,7 @@
+ set_create_dir .
+ set_lg_dir ./log
+ set_tmp_dir ./tmp
++set_flags db_log_autoremove on
  
  # -- thread_count must be >= 8
- set_thread_count	64
+ set_thread_count 64

61 lines not on this page · raw message

43 lines not on this page · raw message

deleted file mode 100644
index f6e5828..0000000
@@ -1,36 +0,0 @@
-Backport from RPM 5.4.1 CVS, disabled fsync.
-
-Upstream-Status: Backport
-
-Signed-off-by: Mark Hatle <[email protected]>
-
-diff -ur rpm-5.4.0.orig/CHANGES rpm-5.4.0/CHANGES
---- rpm-5.4.0.orig/CHANGES	2010-12-29 07:51:38.000000000 -0600
-+++ rpm-5.4.0/CHANGES	2011-02-15 20:54:27.021926840 -0600
-@@ -1,4 +1,5 @@
- 5.4.0 -> 5.4.1:
-+    - jbj: remove fsync(2) after file install, its intolerably slow.
- 
- 5.3.7 -> 5.4.0:
-     - jbj: remove markReplacedFiles.
-diff -ur rpm-5.4.0.orig/lib/fsm.c rpm-5.4.0/lib/fsm.c
---- rpm-5.4.0.orig/lib/fsm.c	2009-12-10 12:52:18.000000000 -0600
-+++ rpm-5.4.0/lib/fsm.c	2011-02-15 20:55:04.372938221 -0600
-@@ -1017,7 +1017,17 @@
- 	    (void) fsmNext(fsm, IOSM_NOTIFY);
-     }
- 
-+#ifdef DYING
-+/* Measurements from installing kernel-source package:
-+ * +fsync
-+ *     total:               1      0.000000 MB    640.854524 secs
-+ * +fdatasync
-+ *     total:               1      0.000000 MB    419.983200 secs
-+ * w/o fsync/fdsatasync:
-+ *     total:               1      0.000000 MB     12.492918 secs
-+ */
-     xx = fsync(Fileno(fsm->wfd));
-+#endif
- 
-     if (st->st_size > 0 && (fsm->fdigest || fsm->digest)) {
- 	void * digest = NULL;

90 lines not on this page · raw message

similarity index 93%
rename from meta/recipes-support/db/db_5.1.19.bb
rename to meta/recipes-support/db/db_5.3.15.bb
index 7e84646..9d2bbe5 100644
@@ -14,15 +14,15 @@ HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
 LICENSE = "Sleepycat"
 VIRTUAL_NAME ?= "virtual/db"
 CONFLICTS = "db3"
-PR = "r4"
+PR = "r5"
 
 SRC_URI = "http://download.oracle.com/berkeley-db/db-${PV}.tar.gz"
 SRC_URI += "file://arm-thumb-mutex_db5.patch;patchdir=.."
 
-SRC_URI[md5sum] = "76fcbfeebfcd09ba0b4d96bfdf8d884d"
-SRC_URI[sha256sum] = "0194d4ca9266ba1a1c0bfbc233b18bfd05f63163453c81ebcdfdc7112d5ac850"
+SRC_URI[md5sum] = "5493fb5f7cc3915887c836b096f18773"
+SRC_URI[sha256sum] = "4f4f7d548984dde3584fcda0e4f96901cb8bafb08033a7781aec64ef2ea1f579"
 
-LIC_FILES_CHKSUM = "file://../LICENSE;md5=86f9294f39f38ef9e89690bcd2320e7a"
+LIC_FILES_CHKSUM = "file://../LICENSE;md5=12cc3ff983ed4ecc6cc091370ee4dbc3"
 
 inherit autotools
 

new file mode 100644
index 0000000..980e1b1
@@ -0,0 +1,29 @@
+Add support for cross compiling lua
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -ur rpm-5.4.9.orig/configure.ac rpm-5.4.9/configure.ac
+--- rpm-5.4.9.orig/configure.ac	2012-05-16 12:16:36.589813548 -0500
++++ rpm-5.4.9/configure.ac	2012-05-16 12:26:01.070813518 -0500
+@@ -120,6 +120,9 @@
+ 
+ AC_PATH_PROG(AS, as, as)
+ 
++CC_FOR_BUILD=${CC_FOR_BUILD-\$(CC)}
++AC_SUBST(CC_FOR_BUILD)
++
+ dnl # GCC specifics
+ AC_PROG_GCC_TRADITIONAL
+ AC_ARG_ENABLE(build-pic,
+diff -ur rpm-5.4.9.orig/lua/Makefile.am rpm-5.4.9/lua/Makefile.am
+--- rpm-5.4.9.orig/lua/Makefile.am	2012-04-07 19:15:25.000000000 -0500
++++ rpm-5.4.9/lua/Makefile.am	2012-05-16 12:26:19.556856688 -0500
+@@ -40,7 +40,7 @@
+ 
+ # --- bin2c doesn't need anything but a compiler
+ bin2c$(EXEEXT):  bin2c.c
+-	$(CC) -o $@ $<
++	$(CC_FOR_BUILD) -o $@ $<
+ 
+ liblua_la_SOURCES =
+ liblua_la_CFLAGS = @WITH_LUA_SUBDIR_DEF@

index e4db0e4..8a9e712 100644
@@ -12,10 +12,11 @@ Upstream-Status: Pending
 
 Signed-off-by: Mark Hatle <[email protected]>
 
-diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
---- rpm-5.4.0.orig/lib/psm.c	2010-12-29 07:42:11.000000000 -0600
-+++ rpm-5.4.0/lib/psm.c	2011-11-08 13:38:48.132791154 -0600
-@@ -792,6 +792,10 @@
+Index: rpm-5.4.9/lib/psm.c
+===================================================================
+--- rpm-5.4.9.orig/lib/psm.c
++++ rpm-5.4.9/lib/psm.c
+@@ -801,6 +801,10 @@ static rpmRC runScript(rpmpsm psm, Heade
      int xx;
      int i;
  

@@ -26,23 +27,23 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
      if (psm->sstates != NULL && ix >= 0 && ix < RPMSCRIPT_MAX)
  	ssp = psm->sstates + ix;
      if (ssp != NULL)
-@@ -858,14 +862,29 @@
+@@ -867,14 +871,29 @@ assert(he->p.str != NULL);
  		(F_ISSET(psm, UNORDERED) ? "a" : ""));
  
      if (Phe->p.argv == NULL) {
--	argv = alloca(5 * sizeof(*argv));
+-	argv = (const char **) alloca(5 * sizeof(*argv));
 -	argv[0] = "/bin/sh";
 -	argc = 1;
-+	argv = alloca(7 * sizeof(*argv));
++	argv = (const char **) alloca(7 * sizeof(*argv));
 +	argc = 0;
 +    } else {
-+	argv = alloca((Phe->c + 6) * sizeof(*argv));
++	argv = (const char **) alloca((Phe->c + 6) * sizeof(*argv));
 +	argc = 0;
 +    }
 +
 +#ifdef RPM_VENDOR_POKY
 +    if (scriptletWrapper && *scriptletWrapper) {
-+        argv[argc++] = scriptletWrapper;
++	argv[argc++] = scriptletWrapper;
 +	argv[argc] = rpmtsRootDir(ts);
 +	if (!argv[argc] || !*argv[argc])
 +	   argv[argc] = "/";

@@ -51,10 +52,10 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
 +#endif
 +
 +    if (Phe->p.argv == NULL) {
-+        argv[argc++] = "/bin/sh";
++	argv[argc++] = "/bin/sh";
  	ldconfig_done = 0;
      } else {
--	argv = alloca((Phe->c + 4) * sizeof(*argv));
+-	argv = (const char **) alloca((Phe->c + 4) * sizeof(*argv));
 -	memcpy(argv, Phe->p.argv, Phe->c * sizeof(*argv));
 -	argc = Phe->c;
 +	memcpy((argv + argc), Phe->p.argv, Phe->c * sizeof(*argv));

@@ -62,7 +63,7 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
  	ldconfig_done = (ldconfig_path && !strcmp(argv[0], ldconfig_path)
  		? 1 : 0);
      }
-@@ -916,7 +935,12 @@
+@@ -925,7 +944,12 @@ assert(he->p.str != NULL);
  	    goto exit;
  
  	if (rpmIsDebug() &&

@@ -76,7 +77,7 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
  	{
  	    static const char set_x[] = "set -x\n";
  	    nw = Fwrite(set_x, sizeof(set_x[0]), sizeof(set_x)-1, fd);
-@@ -1051,12 +1075,22 @@
+@@ -1060,12 +1084,22 @@ assert(he->p.str != NULL);
  
  	{   const char * rootDir = rpmtsRootDir(ts);
  	    if (!rpmtsChrootDone(ts) && rootDir != NULL &&

@@ -99,7 +100,7 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
  	    xx = Chdir("/");
  	    rpmlog(RPMLOG_DEBUG, D_("%s: %s(%s)\texecv(%s) pid %d\n"),
  			psm->stepName, sln, NVRA,
-@@ -2961,6 +2995,13 @@
+@@ -2977,6 +3011,13 @@ assert(psm->te != NULL);
      case PSM_SCRIPT:	/* Run current package scriptlets. */
  	/* XXX running %verifyscript/%sanitycheck doesn't have psm->te */
      {	rpmtxn _parent = (psm && psm->te ? psm->te->txn : NULL);

@@ -113,7 +114,7 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
  	xx = rpmtxnBegin(rpmtsGetRdb(ts), _parent, NULL);
  	rc = runInstScript(psm);
  	if (rc)
-@@ -2968,11 +3009,24 @@
+@@ -2984,11 +3025,24 @@ assert(psm->te != NULL);
  	else
  	     xx = rpmtxnCommit(rpmtsGetRdb(ts)->db_txn);
  	rpmtsGetRdb(ts)->db_txn = NULL;

@@ -138,7 +139,7 @@ diff -ur rpm-5.4.0.orig/lib/psm.c rpm-5.4.0/lib/psm.c
  	break;
      case PSM_IMMED_TRIGGERS:
  	/* Run triggers in this package other package(s) set off. */
-@@ -2982,7 +3036,18 @@
+@@ -2998,7 +3052,18 @@ assert(psm->te != NULL);
  	    F_SET(psm, GOTTRIGGERS);
  	}
  	if (psm->triggers != NULL)

index 1667901..f29866b 100644
@@ -16,20 +16,20 @@ RP 2012/2/7
  2 files changed, 152 insertions(+), 1 deletions(-)
  create mode 100644 tools/rpmdeps-oecore.c
 
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index f520843..2eba9bf 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
+Index: rpm-5.4.9/tools/Makefile.am
+===================================================================
+--- rpm-5.4.9.orig/tools/Makefile.am
++++ rpm-5.4.9/tools/Makefile.am
 @@ -58,7 +58,7 @@ pkgbin_PROGRAMS =	\
  	@WITH_AUGEAS_AUGTOOL@ chroot cp @WITH_CUDF_CUDFTOOL@ find mtree \
  	@WITH_SEMANAGE_SEMODULE@ wget \
  	rpmcache rpmdigest rpmrepo rpmspecdump \
 -	rpmcmp rpmdeps sqlite3 @WITH_KEYUTILS_RPMKEY@ @WITH_LIBELF_DEBUGEDIT@
 +	rpmcmp rpmdeps rpmdeps-oecore sqlite3 @WITH_KEYUTILS_RPMKEY@ @WITH_LIBELF_DEBUGEDIT@
- dist_man_MANS =		rpmgrep.1
- 
- augtool_SOURCES =	augtool.c
-@@ -155,6 +155,10 @@ rpmdeps_SOURCES =	rpmdeps.c
+ if WITH_DB
+ pkgbin_PROGRAMS +=	dbconvert
+ endif
+@@ -168,6 +168,10 @@ rpmdeps_SOURCES =	rpmdeps.c
  rpmdeps_LDFLAGS =	@LDFLAGS_STATIC@ $(LDFLAGS)
  rpmdeps_LDADD =		$(RPM_LDADD_COMMON)
  

@@ -40,11 +40,10 @@ index f520843..2eba9bf 100644
  rpmdigest_SOURCES =	rpmdigest.c
  rpmdigest_LDFLAGS =	@LDFLAGS_STATIC@ $(LDFLAGS)
  rpmdigest_LDADD =	$(RPMIO_LDADD_COMMON)
-diff --git a/tools/rpmdeps-oecore.c b/tools/rpmdeps-oecore.c
-new file mode 100644
-index 0000000..e646da9
+Index: rpm-5.4.9/tools/rpmdeps-oecore.c
+===================================================================
 --- /dev/null
-+++ b/tools/rpmdeps-oecore.c
++++ rpm-5.4.9/tools/rpmdeps-oecore.c
 @@ -0,0 +1,147 @@
 +#include "system.h"
 +const char *__progname;

@@ -193,6 +192,3 @@ index 0000000..e646da9
 +    optCon = rpmcliFini(optCon);
 +    return ec;
 +}
--- 
-1.7.4.1
-

249 lines not on this page · raw message

new file mode 100644
index 0000000..8268a2d
@@ -0,0 +1,28 @@
+commit 6c47ad415246cc3a3edac2e1637106d330574c85
+Author: Mark Hatle <[email protected]>
+Date:   Fri May 11 19:05:09 2012 -0500
+
+    RpmHeader.cc: RPM 5.4.9 integration
+    
+    _RPMVSF_xxx - NODIGEST, NOSIGNATURES, NOHEADER, and NOPAYLOAD
+    are now obsolete and no longer supported.
+    
+    Signed-off-by: Mark Hatle <[email protected]>
+
+diff --git a/zypp/target/rpm/RpmHeader.cc b/zypp/target/rpm/RpmHeader.cc
+index 1224ecd..c96dae6 100644
+--- a/zypp/target/rpm/RpmHeader.cc
++++ b/zypp/target/rpm/RpmHeader.cc
+@@ -230,10 +230,12 @@ RpmHeader::constPtr RpmHeader::readPackage( const Pathname & path_r,
+   librpmDb::globalInit();
+   rpmts ts = ::rpmtsCreate();
+   unsigned vsflag = RPMVSF_DEFAULT;
++#if !defined(_RPM_5)
+   if ( verification_r & NODIGEST )
+     vsflag |= _RPMVSF_NODIGESTS;
+   if ( verification_r & NOSIGNATURE )
+     vsflag |= _RPMVSF_NOSIGNATURES;
++#endif
+   ::rpmtsSetVSFlags( ts, rpmVSFlags(vsflag) );
+ 
+   Header nh = 0;

index 3c3a9f0..c5761d5 100644
@@ -11,7 +11,7 @@ DEPENDS  = "rpm boost curl libxml2 zlib sat-solver expat openssl udev libproxy"
 S = "${WORKDIR}/git"
 SRCREV = "15b6c52260bbc52b3d8e585e271b67e10cc7c433"
 PV = "0.0-git${SRCPV}"
-PR = "r20"
+PR = "r21"
 
 SRC_URI = "git://github.com/openSUSE/libzypp.git;protocol=git \
            file://no-doc.patch \

@@ -23,6 +23,7 @@ SRC_URI = "git://github.com/openSUSE/libzypp.git;protocol=git \
 	   file://fix_for_compile_wth_gcc-4.6.0.patch \
 	   file://hardcode-lib-fix.patch \
 	   file://close.patch \
+	   file://libzypp-rpm549.patch \
           "
 
 SRC_URI_append_mips = " file://mips-workaround-gcc-tribool-error.patch"

new file mode 100644
index 0000000..a46e244
@@ -0,0 +1,112 @@
+From: Piotr Roszatycki <[email protected]>
+Date: Wed, 27 Jan 2010 16:53:11 +0100
+Subject: [PATCH] Change library name
+
+The soname was changed to ossp-uuid to prevend the name clash with e2fsprogs's
+uuid library.
+---
+ Makefile.in      |    6 +++---
+ perl/Makefile.PL |   12 ++++++------
+ php/config.m4    |    2 +-
+ uuid-config.in   |    2 +-
+ uuid.pc.in       |    4 ++--
+ 5 files changed, 13 insertions(+), 13 deletions(-)
+
+diff --git a/Makefile.in b/Makefile.in
+index d28f4be..c2ba99d 100644
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -62,13 +62,13 @@ PERL        = @PERL@
+ PHP         = @PHP@
+ PG_CONFIG   = @PG_CONFIG@
+ 
+-LIB_NAME    = libuuid.la
++LIB_NAME    = libossp-uuid.la
+ LIB_OBJS    = uuid.lo uuid_md5.lo uuid_sha1.lo uuid_prng.lo uuid_mac.lo uuid_time.lo uuid_ui64.lo uuid_ui128.lo uuid_str.lo
+ 
+-DCE_NAME    = libuuid_dce.la
++DCE_NAME    = libossp-uuid_dce.la
+ DCE_OBJS    = uuid_dce.lo $(LIB_OBJS)
+ 
+-CXX_NAME    = libuuid++.la
++CXX_NAME    = libossp-uuid++.la
+ CXX_OBJS    = uuid++.lo $(LIB_OBJS)
+ 
+ PRG_NAME    = uuid
+diff --git a/perl/Makefile.PL b/perl/Makefile.PL
+index 92f4494..9c6fee6 100644
+--- a/perl/Makefile.PL
++++ b/perl/Makefile.PL
+@@ -33,9 +33,9 @@ use Config;
+ use ExtUtils::MakeMaker;
+ 
+ #   determine source directory
+-my ($srcdir) = map { my $d = $_; $d =~ s/\/libuuid\.la$//; $d }
+-               grep { -f $_ } ("../libuuid.la", glob("../*/libuuid.la"))
+-    or die "no source directory found (where libuuid.la is located)";
++my ($srcdir) = map { my $d = $_; $d =~ s/\/libossp-uuid\.la$//; $d }
++               grep { -f $_ } ("../libossp-uuid.la", glob("../*/libossp-uuid.la"))
++    or die "no source directory found (where libossp-uuid.la is located)";
+ 
+ #   determine extra build options
+ my $compat = 0;
+@@ -47,15 +47,15 @@ WriteMakefile(
+     VERSION_FROM      => 'uuid.pm',
+     ABSTRACT_FROM     => 'uuid.pod',
+     PREREQ_PM         => {},
+-    LIBS              => [ "-L$srcdir/.libs -L$srcdir -luuid" ],
++    LIBS              => [ "-L$srcdir/.libs -L$srcdir -lossp-uuid" ],
+     DEFINE            => '',
+     INC               => "-I. -I$srcdir",
+     PM                => { 'uuid.pm'   => '$(INST_LIBDIR)/uuid.pm',
+                            'uuid.pod'  => '$(INST_LIBDIR)/uuid.pod',
+                            ($compat ? ('uuid_compat.pm'  => '$(INST_LIBDIR)/../Data/UUID.pm')  : ()),
+                            ($compat ? ('uuid_compat.pod' => '$(INST_LIBDIR)/../Data/UUID.pod') : ()), },
+-    MAN3PODS          => { 'uuid.pod' => '$(INST_MAN3DIR)/OSSP::uuid.3',
+-                           ($compat ? ('uuid_compat.pod' => '$(INST_MAN3DIR)/Data::UUID.3') : ()), },
++    MAN3PODS          => { 'uuid.pod' => '$(INST_MAN3DIR)/OSSP::uuid.3pm',
++                           ($compat ? ('uuid_compat.pod' => '$(INST_MAN3DIR)/Data::UUID.3pm') : ()), },
+     TYPEMAPS          => [ 'uuid.tm' ],
+     test              => { TESTS => 'uuid.ts' . ($compat ? ' uuid_compat.ts' : '') },
+     NO_META           => 1,
+diff --git a/php/config.m4 b/php/config.m4
+index 5091b96..969b457 100644
+--- a/php/config.m4
++++ b/php/config.m4
+@@ -34,7 +34,7 @@ if test "$PHP_UUID" != "no"; then
+     PHP_NEW_EXTENSION(uuid, uuid.c, $ext_shared)
+     AC_DEFINE(HAVE_UUID, 1, [Have OSSP uuid library])
+     PHP_ADD_LIBPATH([..], )
+-    PHP_ADD_LIBRARY([uuid],, UUID_SHARED_LIBADD)
++    PHP_ADD_LIBRARY([ossp-uuid],, UUID_SHARED_LIBADD)
+     PHP_ADD_INCLUDE([..])
+     PHP_SUBST(UUID_SHARED_LIBADD)
+ 
+diff --git a/uuid-config.in b/uuid-config.in
+index 8d2a063..5b58812 100644
+--- a/uuid-config.in
++++ b/uuid-config.in
+@@ -121,7 +121,7 @@ do
+             output_extra="$output_extra $uuid_ldflags"
+             ;;
+         --libs)
+-            output="$output -luuid"
++            output="$output -lossp-uuid"
+             output_extra="$output_extra $uuid_libs"
+             ;;
+         * )
+diff --git a/uuid.pc.in b/uuid.pc.in
+index c76ad1e..de00c2f 100644
+--- a/uuid.pc.in
++++ b/uuid.pc.in
+@@ -36,7 +36,7 @@ Name: OSSP uuid
+ Description: Universally Unique Identifier (UUID) Library
+ Version: @UUID_VERSION_RAW@
+ URL: http://www.ossp.org/pkg/lib/uuid/
+-Cflags: -I${includedir}
+-Libs: -L${libdir} -luuid
++Cflags: -I${includedir}/ossp
++Libs: -L${libdir} -lossp-uuid
+ Libs.private: @LIBS@
+ 
+-- 

55 lines not on this page · raw message

51 lines not on this page · raw message

new file mode 100644
index 0000000..1f92cea
@@ -0,0 +1,36 @@
+Description: Support dash-less args to from_string.
+Author: Tim Retout <[email protected]>
+Bug-Debian: http://bugs.debian.org/635607
+
+The module Data::GUID depends on Data::UUID supporting this behaviour.
+
+--- a/perl/uuid_compat.pm
++++ b/perl/uuid_compat.pm
+@@ -93,7 +93,9 @@
+     $uuid->import('str',
+           $str =~ /^0x/
+         ? join '-', unpack('x2 a8 a4 a4 a4 a12', $str)
+-        : $str
++        : $str =~ /-/
++        ? $str
++        : join '-', unpack('A8 A4 A4 A4 A12', $str)
+     );
+     return $uuid->export('bin');
+ }
+--- a/perl/uuid_compat.ts
++++ b/perl/uuid_compat.ts
+@@ -28,7 +28,7 @@
+ ##  uuid_compat.ts: Data::UUID Backward Compatibility Perl API (Perl test suite part)
+ ##
+ 
+-use Test::More tests => 14;
++use Test::More tests => 16;
+ 
+ BEGIN {
+     use_ok('Data::UUID');
+@@ -53,3 +53,5 @@
+ ok($uuid8 = $ug->from_string("6ba7b811-9dad-11d1-80b4-00c04fd430c8"));
+ ok($ug->compare($uuid7, $uuid8) == 0);
+ 
++ok($uuid9 = $ug->from_string("6ba7b8119dad11d180b400c04fd430c8"));
++ok($ug->compare($uuid7, $uuid9) == 0);

new file mode 100644
index 0000000..97daca4
@@ -0,0 +1,24 @@
+Remove hardcoded libtool name, fall back to generated name
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -ur uuid-1.6.2.orig/Makefile.in uuid-1.6.2/Makefile.in
+--- uuid-1.6.2.orig/Makefile.in	2012-05-14 14:37:19.579672930 -0500
++++ uuid-1.6.2/Makefile.in	2012-05-14 14:37:49.112733787 -0500
+@@ -32,6 +32,7 @@
+ VPATH       = @srcdir@
+ srcdir      = @srcdir@
+ top_srcdir  = @top_srcdir@
++top_builddir = @top_builddir@
+ S           = $(srcdir)
+ C           = .
+ 
+@@ -55,7 +56,7 @@
+ CP          = cp
+ RMDIR       = rmdir
+ SHTOOL      = $(S)/shtool
+-LIBTOOL     = $(C)/libtool
++LIBTOOL     = @LIBTOOL@
+ TRUE        = true
+ POD2MAN     = pod2man
+ PERL        = @PERL@

new file mode 100644
index 0000000..78f3c94
@@ -0,0 +1,16 @@
+We don't want anything stripped
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -ur uuid-1.6.2.orig/Makefile.in uuid-1.6.2/Makefile.in
+--- uuid-1.6.2.orig/Makefile.in	2012-05-14 14:42:42.225789456 -0500
++++ uuid-1.6.2/Makefile.in	2012-05-14 15:03:03.119733400 -0500
+@@ -254,7 +254,7 @@
+ 	-@if [ ".$(WITH_CXX)" = .yes ]; then \
+ 	    $(LIBTOOL) --mode=install $(SHTOOL) install -c -m 644 $(CXX_NAME) $(DESTDIR)$(libdir)/; \
+ 	fi
+-	@$(LIBTOOL) --mode=install $(SHTOOL) install -c -s -m 755 uuid $(DESTDIR)$(bindir)/
++	@$(LIBTOOL) --mode=install $(SHTOOL) install -c -m 755 uuid $(DESTDIR)$(bindir)/
+ 	$(SHTOOL) install -c -m 644 $(S)/uuid.1 $(DESTDIR)$(mandir)/man1/
+ 	-@if [ ".$(WITH_PERL)" = .yes ]; then \
+ 	    (cd $(S)/perl && $(MAKE) $(MFLAGS) install DESTDIR=$(DESTDIR)); \

58 lines not on this page · raw message

new file mode 100644
index 0000000..1f4ba98
@@ -0,0 +1,20 @@
+Fix integration of ossp-uuid
+
+We need to avoid including the util-linux uuid library, instead
+we need ossp-uuid.  There is a related hack in do_configure to
+make sure that we use the right .pc file as well.
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -ur rpm-5.4.9.orig/configure.ac rpm-5.4.9/configure.ac
+--- rpm-5.4.9.orig/configure.ac	2012-05-17 16:37:20.594790192 -0500
++++ rpm-5.4.9/configure.ac	2012-05-17 16:39:23.126933596 -0500
+@@ -1909,7 +1909,7 @@
+ esac
+ RPM_CHECK_LIB(
+     [OSSP uuid], [uuid],
+-    [ossp-uuid uuid], [uuid_import], [uuid.h],
++    [ossp-uuid], [uuid_import], [uuid.h],
+     [no,external:none], [],
+     [ dnl # enable OSSP uuid native API support for embedded Lua
+       if test ".$WITH_LUA" = .yes; then

index 6eba802..2ca0f58 100644
@@ -42,8 +42,8 @@ HOMEPAGE = "http://rpm5.org/"
 LICENSE = "LGPLv2.1"
 LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=2d5025d4aa3495befef8f17206a5b0a1"
 
-DEPENDS = "libpcre attr acl popt file"
-PR = "r40"
+DEPENDS = "libpcre attr acl popt ossp-uuid file"
+PR = "r41"
 
 # rpm2cpio is a shell script, which is part of the rpm src.rpm.  It is needed
 # in order to extract the distribution SRPM into a format we can extract...

@@ -69,6 +69,7 @@ SRC_URI = "http://www.rpm5.org/files/rpm/rpm-5.4/rpm-5.4.9-0.20120508.src.rpm;ex
 	   file://rpm-no-perl-urpm.patch \
 	   file://rpm-macros.patch \
 	   file://rpm-lua.patch \
+	   file://rpm-ossp-uuid.patch \
 	  "
 
 SRC_URI[md5sum] = "60d56ace884340c1b3fcac6a1d58e768"

@@ -145,7 +146,7 @@ EXTRA_OECONF += "--verbose \
 		--without-gnutls \
 		--with-pcre \
 		--enable-utf8 \
-		--without-uuid \
+		--with-uuid \
 		--with-attr \
 		--with-acl \
 		--with-popt=external \

@@ -330,6 +331,10 @@ do_configure() {
 
 	./autogen.sh
 
+	# NASTY hack to make sure configure files the right pkg-config file...
+	sed -e 's/pkg-config --exists uuid/pkg-config --exists ossp-uuid/g' \
+	    -e 's/pkg-config uuid/pkg-config ossp-uuid/g' -i configure
+
 	export varprefix=${localstatedir}
 	export CC_FOR_BUILD="${BUILD_CC}"
 	oe_runconf

index 35928ab..097fa12 100644
@@ -130,12 +130,12 @@ resolve_package_rpm () {
 	shift
 	local pkg_name=""
 	for solve in `cat ${conffile}`; do
-		pkg_name=$(${RPM} -D "_dbpath $solve" -D "__dbi_txn create nofsync" -q --yaml $@ | grep -i 'Packageorigin' | cut -d : -f 2)
-		if [ -n "$pkg_name" ]; then
+		pkg_name=$(${RPM} -D "_dbpath $solve" -D "__dbi_txn create nofsync" -q --qf "%{packageorigin}\n" "$@" | grep -v "is not installed" || true)
+		if [ -n "$pkg_name" -a "$pkg_name" != "(none)" ]; then
+			echo $pkg_name
 			break;
 		fi
 	done
-	echo $pkg_name
 }
 
 # rpm common command and options

@@ -401,9 +401,9 @@ package_install_internal_rpm () {
 
 	# Now that we have a solution, pull out a list of what to install...
 	echo "Manifest: ${target_rootfs}/install/install.manifest"
-	${RPM} -D "_dbpath ${target_rootfs}/install" -qa --yaml \
+	${RPM} -D "_dbpath ${target_rootfs}/install" -qa --qf "%{packageorigin}\n" \
 		-D "__dbi_txn create nofsync private" \
-		| grep -i 'Packageorigin' | cut -d : -f 2 > ${target_rootfs}/install/install_solution.manifest
+		> ${target_rootfs}/install/install_solution.manifest
 
 	touch ${target_rootfs}/install/install_multilib_solution.manifest
 

@@ -421,9 +421,9 @@ package_install_internal_rpm () {
 
 		# Now that we have a solution, pull out a list of what to install...
 		echo "Manifest: ${target_rootfs}/install/install_multilib.manifest"
-		${RPM} -D "_dbpath ${target_rootfs}/install" -qa --yaml \
+		${RPM} -D "_dbpath ${target_rootfs}/install" -qa --qf "%{packageorigin}\n" \
 			-D "__dbi_txn create nofsync private" \
-			| grep -i 'Packageorigin' | cut -d : -f 2 > ${target_rootfs}/install/install_multilib_solution.manifest
+			> ${target_rootfs}/install/install_multilib_solution.manifest
 
 	fi
 

@@ -478,9 +478,9 @@ EOF
 			-U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
 			${target_rootfs}/install/initial_install.manifest
 
-		${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --yaml \
+		${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf "%{packageorigin}\n" \
 			-D "__dbi_txn create nofsync private" \
-			| grep -i 'Packageorigin' | cut -d : -f 2 > ${target_rootfs}/install/initial_solution.manifest
+			> ${target_rootfs}/install/initial_solution.manifest
 
 		rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest
 		

new file mode 100644
index 0000000..3c6dad4
@@ -0,0 +1,23 @@
+Add the ability to query the packageorigin
+
+Written by jbj at rpm5.org
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+Index: rpm-5.4.8/rpmdb/hdrfmt.c
+===================================================================
+--- rpm-5.4.8.orig/rpmdb/hdrfmt.c
++++ rpm-5.4.8/rpmdb/hdrfmt.c
+@@ -2403,8 +2403,10 @@ static int pkgoriginTag(Header h, HE_t 
+     int rc = 1;
+ 
+     he->tag = RPMTAG_PACKAGEORIGIN;
+-    if (!headerGet(h, he, HEADERGET_NOEXTENSION)
+-     && (origin = headerGetOrigin(h)) != NULL)
++    /* XXX two sources for tag data: what search precedence? */
++    if (headerGet(h, he, HEADERGET_NOEXTENSION))
++	rc = 0;
++    else if ((origin = headerGetOrigin(h)) != NULL)
+     {
+ 	he->t = RPM_STRING_TYPE;
+ 	he->p.str = xstrdup(origin);

index 2ca0f58..a38a684 100644
@@ -43,7 +43,7 @@ LICENSE = "LGPLv2.1"
 LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=2d5025d4aa3495befef8f17206a5b0a1"
 
 DEPENDS = "libpcre attr acl popt ossp-uuid file"
-PR = "r41"
+PR = "r42"
 
 # rpm2cpio is a shell script, which is part of the rpm src.rpm.  It is needed
 # in order to extract the distribution SRPM into a format we can extract...

@@ -70,6 +70,7 @@ SRC_URI = "http://www.rpm5.org/files/rpm/rpm-5.4/rpm-5.4.9-0.20120508.src.rpm;ex
 	   file://rpm-macros.patch \
 	   file://rpm-lua.patch \
 	   file://rpm-ossp-uuid.patch \
+	   file://rpm-packageorigin.patch \
 	  "
 
 SRC_URI[md5sum] = "60d56ace884340c1b3fcac6a1d58e768"

index c5761d5..90ee8c4 100644
@@ -11,7 +11,7 @@ DEPENDS  = "rpm boost curl libxml2 zlib sat-solver expat openssl udev libproxy"
 S = "${WORKDIR}/git"
 SRCREV = "15b6c52260bbc52b3d8e585e271b67e10cc7c433"
 PV = "0.0-git${SRCPV}"
-PR = "r21"
+PR = "r22"
 
 SRC_URI = "git://github.com/openSUSE/libzypp.git;protocol=git \
            file://no-doc.patch \

index 9d8422f..b0382f6 100644
@@ -8,7 +8,7 @@ DEPENDS = "libcheck rpm zlib expat db"
 
 SRCREV = "0a7378d5f482f477a01cf1690d76871ab8bdcc32"
 PV = "0.0-git${SRCPV}"
-PR = "r13"
+PR = "r14"
 
 PARALLEL_MAKE=""
 

index 56ccc86..0a1df5d 100644
@@ -5,7 +5,7 @@ LICENSE  = "GPLv2+"
 LIC_FILES_CHKSUM = "file://COPYING;md5=3201406e350b39e05a82e28b5020f413"
 
 DEPENDS  = "libzypp augeas"
-PR = "r2"
+PR = "r3"
 SRCREV = "2c5bb6ceb99ecd950ef993e43d77bf0569ea0582"
 
 inherit cmake

index 097fa12..b84c044 100644
@@ -454,6 +454,38 @@ EOF
 
 	chmod 0755 ${WORKDIR}/scriptlet_wrapper
 
+	# Configure RPM... we enforce these settings!
+	mkdir -p ${target_rootfs}${rpmlibdir}
+	mkdir -p ${target_rootfs}${rpmlibdir}/log
+	# After change the __db.* cache size, log file will not be generated automatically,
+	# that will raise some warnings, so touch a bare log for rpm write into it.
+	touch ${target_rootfs}${rpmlibdir}/log/log.0000000001
+	cat > ${target_rootfs}${rpmlibdir}/DB_CONFIG << EOF
+# ================ Environment
+set_data_dir .
+set_create_dir .
+set_lg_dir ./log
+set_tmp_dir ./tmp
+set_flags db_log_autoremove on
+
+# -- thread_count must be >= 8
+set_thread_count 64
+
+# ================ Logging
+
+# ================ Memory Pool
+set_cachesize 0 1048576 0
+set_mp_mmapsize 268435456
+
+# ================ Locking
+set_lk_max_locks 16384
+set_lk_max_lockers 16384
+set_lk_max_objects 16384
+mutex_set_max 163840
+
+# ================ Replication
+EOF
+
 	# RPM is special. It can't handle dependencies and preinstall scripts correctly. Its
 	# probably a feature. The only way to convince rpm to actually run the preinstall scripts 
 	# for base-passwd and shadow first before installing packages that depend on these packages 

index eafb34b..202f9ce 100644
@@ -59,37 +59,6 @@ fakeroot rootfs_rpm_do_rootfs () {
 	# Setup base system configuration
 	mkdir -p ${INSTALL_ROOTFS_RPM}/etc/rpm/
 
-	mkdir -p ${INSTALL_ROOTFS_RPM}${rpmlibdir}
-	mkdir -p ${INSTALL_ROOTFS_RPM}${rpmlibdir}/log
-	# After change the __db.* cache size, log file will not be generated automatically,
-	# that will raise some warnings, so touch a bare log for rpm write into it.
-	touch ${INSTALL_ROOTFS_RPM}${rpmlibdir}/log/log.0000000001
-	cat > ${INSTALL_ROOTFS_RPM}${rpmlibdir}/DB_CONFIG << EOF
-# ================ Environment
-set_data_dir .
-set_create_dir .
-set_lg_dir ./log
-set_tmp_dir ./tmp
-set_flags db_log_autoremove on
-
-# -- thread_count must be >= 8
-set_thread_count 64
-
-# ================ Logging
-
-# ================ Memory Pool
-set_cachesize 0 1048576 0
-set_mp_mmapsize 268435456
-
-# ================ Locking
-set_lk_max_locks 16384
-set_lk_max_lockers 16384
-set_lk_max_objects 16384
-mutex_set_max 163840
-
-# ================ Replication
-EOF
-
 	# List must be prefered to least preferred order
 	INSTALL_PLATFORM_EXTRA_RPM=""
 	for each_arch in ${MULTILIB_PACKAGE_ARCHS} ${PACKAGE_ARCHS}; do

new file mode 100644
index 0000000..3423c44
@@ -0,0 +1,19 @@
+dumpMetadata.py: Fix for RPM5 - 5.4.9 integration
+
+RPM5 no longer has a switch to disable signature validation.  (Due to security
+validation concerns.)
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -u createrepo-0.4.11.orig/dumpMetadata.py createrepo-0.4.11/dumpMetadata.py
+--- createrepo-0.4.11.orig/dumpMetadata.py	2012-06-05 10:12:55.687964222 -0500
++++ createrepo-0.4.11/dumpMetadata.py	2012-06-05 10:40:08.154060600 -0500
+@@ -92,7 +92,7 @@
+             fdno = package # let's assume this is an fdno and go with it :)
+     except OSError:
+         raise MDError, "Error opening file"
+-    ts.setVSFlags((rpm._RPMVSF_NOSIGNATURES|rpm.RPMVSF_NOMD5|rpm.RPMVSF_NEEDPAYLOAD))
++    ts.setVSFlags((rpm.RPMVSF_NOMD5|rpm.RPMVSF_NEEDPAYLOAD))
+     try:
+         hdr = ts.hdrFromFdno(fdno)
+     except rpm.error:

index 989a745..060ed59 100644
@@ -4,11 +4,12 @@ HOMEPAGE = "http://createrepo.baseurl.org/"
 LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://COPYING;md5=18810669f13b87348459e611d31ab760"
 
-PR = "r2"
+PR = "r3"
 
 SRC_URI= "http://createrepo.baseurl.org/download/${BP}.tar.gz \
           file://fix-native-install.patch \
           file://python-scripts-should-use-interpreter-from-env.patch \
+	  file://createrepo-rpm549.patch \
          "
 
 SRC_URI[md5sum] = "3e9ccf4abcffe3f49af078c83611eda2"

index b84c044..bb9aa1a 100644
@@ -182,6 +182,7 @@ rpm_update_pkg () {
         # been run by now, so don't have to run them(preun, postun, etc.) when
         # erase the pkg
         if [ -s ${target_rootfs}/install/remove.manifest ]; then
+            echo "# Removal manifest padding...." >> ${target_rootfs}/install/remove.manifest
             rpm_common_comand --noscripts --nodeps \
                 -e `cat ${target_rootfs}/install/remove.manifest`
         fi

@@ -249,7 +250,7 @@ package_install_internal_rpm () {
 
 	# Setup manifest of packages to install...
 	mkdir -p ${target_rootfs}/install
-	echo "# Install manifest" > ${target_rootfs}/install/install.manifest
+	rm -f ${target_rootfs}/install/install.manifest
 
 	# Uclibc builds don't provide this stuff...
 	if [ x${TARGET_OS} = "xlinux" ] || [ x${TARGET_OS} = "xlinux-gnueabi" ] ; then

@@ -309,12 +310,15 @@ package_install_internal_rpm () {
 
 	# Generate an install solution by doing a --justdb install, then recreate it with
 	# an actual package install!
-	${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
-		--predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
-		-D "_dbpath ${target_rootfs}/install" -D "`cat ${confbase}-base_archs.macro`" \
-		-D "__dbi_txn create nofsync" \
-		-U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
-		${target_rootfs}/install/install.manifest
+	if [ -s ${target_rootfs}/install/install.manifest ]; then
+		echo "# Install manifest padding" >> ${target_rootfs}/install/install.manifest
+		${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
+			--predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
+			-D "_dbpath ${target_rootfs}/install" -D "`cat ${confbase}-base_archs.macro`" \
+			-D "__dbi_txn create nofsync" \
+			-U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
+			${target_rootfs}/install/install.manifest
+	fi
 
 	if [ ! -z "${package_attemptonly}" ]; then
 		echo "Adding attempt only packages..."

@@ -407,8 +411,9 @@ package_install_internal_rpm () {
 
 	touch ${target_rootfs}/install/install_multilib_solution.manifest
 
-	if [ -e "${target_rootfs}/install/install_multilib.manifest" ]; then
+	if [ -s "${target_rootfs}/install/install_multilib.manifest" ]; then
 		# multilib package installation
+		echo "# Install multilib manifest padding" >> ${target_rootfs}/install/install_multilib.manifest
 
 		# Generate an install solution by doing a --justdb install, then recreate it with
 		# an actual package install!

@@ -493,33 +498,37 @@ EOF
 	if [ "${INC_RPM_IMAGE_GEN}" = "1" -a -f "$pre_btmanifest" ]; then
 		echo "Skipping pre install due to exisitng image"
 	else
-		echo "# Initial Install manifest" > ${target_rootfs}/install/initial_install.manifest
+		rm -f ${target_rootfs}/install/initial_install.manifest
 		echo "Installing base dependencies first (base-passwd, base-files and shadow) since rpm is special"
 		grep /base-passwd-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
 		grep /base-files-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
 		grep /shadow-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
 
-		# Generate an install solution by doing a --justdb install, then recreate it with
-		# an actual package install!
-		mkdir -p ${target_rootfs}/initial
+		if [ -s ${target_rootfs}/install/initial_install.manifest ]; then
+			echo "# Initial Install manifest padding..." >> ${target_rootfs}/install/initial_install.manifest
 
-		${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
-			--predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
-			-D "_dbpath ${target_rootfs}/initial" -D "`cat ${confbase}.macro`" \
-			-D "__dbi_txn create nofsync" \
-			-U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
-			${target_rootfs}/install/initial_install.manifest
+			# Generate an install solution by doing a --justdb install, then recreate it with
+			# an actual package install!
+			mkdir -p ${target_rootfs}/initial
 
-		${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf "%{packageorigin}\n" \
-			-D "__dbi_txn create nofsync private" \
-			> ${target_rootfs}/install/initial_solution.manifest
+			${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
+				--predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
+				-D "_dbpath ${target_rootfs}/initial" -D "`cat ${confbase}.macro`" \
+				-D "__dbi_txn create nofsync" \
+				-U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
+				${target_rootfs}/install/initial_install.manifest
+
+			${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf "%{packageorigin}\n" \
+				-D "__dbi_txn create nofsync private" \
+				> ${target_rootfs}/install/initial_solution.manifest
 
-		rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest
+			rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest
 		
-		grep -Fv -f ${target_rootfs}/install/initial_solution.manifest ${target_rootfs}/install/total_solution.manifest > ${target_rootfs}/install/total_solution.manifest.new
-		mv ${target_rootfs}/install/total_solution.manifest.new ${target_rootfs}/install/total_solution.manifest
+			grep -Fv -f ${target_rootfs}/install/initial_solution.manifest ${target_rootfs}/install/total_solution.manifest > ${target_rootfs}/install/total_solution.manifest.new
+			mv ${target_rootfs}/install/total_solution.manifest.new ${target_rootfs}/install/total_solution.manifest
 		
-		rm -rf ${target_rootfs}/initial
+			rm -rf ${target_rootfs}/initial
+		fi
 	fi
 
 	echo "Installing main solution manifest (${target_rootfs}/install/total_solution.manifest)"

new file mode 100644
index 0000000..4aba400
@@ -0,0 +1,34 @@
+pkgconfigdeps.sh: Change to restricting pkgconfig to the local directory
+
+Using PKG_CONFIG_PATH will allow pkg-config to fall back to the system paths,
+we don't want this as it may lead to inaccurate results in some corner cases.
+
+PKG_CONFIG_LIBDIR will ensure pkg-config stays within the install directory.
+
+Signed-off-by: Mark Hatle <[email protected]>
+
+diff -ur rpm-5.4.9.orig/scripts/pkgconfigdeps.sh rpm-5.4.9/scripts/pkgconfigdeps.sh
+--- rpm-5.4.9.orig/scripts/pkgconfigdeps.sh	2009-02-13 08:13:37.000000000 -0600
++++ rpm-5.4.9/scripts/pkgconfigdeps.sh	2012-06-07 17:35:42.730003847 -0500
+@@ -18,8 +18,8 @@
+     *.pc)
+ 	# Query the dependencies of the package.
+ 	DIR=`dirname ${filename}`
+-	PKG_CONFIG_PATH="$DIR:$DIR/../../share/pkgconfig"
+-	export PKG_CONFIG_PATH
++	PKG_CONFIG_LIBDIR="$DIR:$DIR/../../share/pkgconfig"
++	export PKG_CONFIG_LIBDIR
+ 	$pkgconfig --print-provides "$filename" 2> /dev/null | while read n r v ; do
+ 	    [ -n "$n" ] || continue
+ 	    # We have a dependency.  Make a note that we need the pkgconfig
+@@ -42,8 +42,8 @@
+ 	[ -n "$oneshot" ] && echo "$oneshot"; oneshot=""
+ 	# Query the dependencies of the package.
+ 	DIR=`dirname ${filename}`
+-	PKG_CONFIG_PATH="$DIR:$DIR/../../share/pkgconfig"
+-	export PKG_CONFIG_PATH
++	PKG_CONFIG_LIBDIR="$DIR:$DIR/../../share/pkgconfig"
++	export PKG_CONFIG_LIBDIR
+ 	$pkgconfig --print-requires "$filename" 2> /dev/null | while read n r v ; do
+ 	    [ -n "$n" ] || continue
+ 	    if  [ -n "$r" ] && [ -n "$v" ]; then

index a38a684..51cf93b 100644
@@ -43,7 +43,7 @@ LICENSE = "LGPLv2.1"
 LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=2d5025d4aa3495befef8f17206a5b0a1"
 
 DEPENDS = "libpcre attr acl popt ossp-uuid file"
-PR = "r42"
+PR = "r43"
 
 # rpm2cpio is a shell script, which is part of the rpm src.rpm.  It is needed
 # in order to extract the distribution SRPM into a format we can extract...

@@ -71,6 +71,7 @@ SRC_URI = "http://www.rpm5.org/files/rpm/rpm-5.4/rpm-5.4.9-0.20120508.src.rpm;ex
 	   file://rpm-lua.patch \
 	   file://rpm-ossp-uuid.patch \
 	   file://rpm-packageorigin.patch \
+	   file://rpm-pkgconfigdeps.patch \
 	  "
 
 SRC_URI[md5sum] = "60d56ace884340c1b3fcac6a1d58e768"