Kworld PlusTV HD PCI 120 (ATSC 120)
I'm trying to get this card working and I'm having some trouble and I'm not sure exactly where. I'm using the 2.6.26.5 kernel gen'd to include all the v4l support.
Using Kradio I can manually tune in a station but the audio only comes out the Line Out jack on the card. Alsa is installed and working, I can play CD's, listen to streaming music, KDE sound effects work, so it appears my sound subsystem is working. The alsa config in Kradio is set to what it determined and it appears to match the device as far as things go. When I try to scan for stations it doesn't find any but I can tune to any local station and get it.
I also can't get the video (HDTV) to work either. When it starts up I get a:
Unable to grab video
Video display is not possible with the current plugin configuration. Try playing with the configuration options of the V4L2 plugin.
And the VBI decoder is running is red, along with the Video plugin supports signal strength readbacks and Ok to Scan.
When I run kdetv in a terminal window I see this:
Requesting 16 streaming i/o buffers
Mapping 16 streaming i/o buffers
Successful opened /dev/vbi (Kworld PlusTV HD PCI 120 (ATSC )
stream-read: ERROR: failed to enable streaming
ASSERT: "_init" in /usr/src/packages/BUILD/kdetv-0.8.9/kdetv/kvideoio/qvideostream.cpp (477) (repeated many times)
Too many errors. Ending V4L2 grabbing.
The MB is a MSI K9N4 SLI with an AMD 64 X2 3800+ cpu and the video card is an ATI x1300 and I've tried it with the fglrx driver and with the vesa driver, it makes no difference.
I've read the Wiki at http://www.linuxtv.org including the http://www.linuxtv.org/wiki/index.php/KWorld_ATSC_120 info. I also downloaded the archived list messages back to January 2007 and looked through them for help.
I'm not sure where to go from here or where to look what to try or even what info to provide that might be of help. So if anyone has any ideas please let me know, I sure could use some ideas.
Thanks.
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 3 lines · Curt Blank
I'm trying to get this card working and I'm having some trouble and I'm not sure exactly where. I'm using the 2.6.26.5 kernel gen'd to include all the v4l support.
I don't know if that version of the kernel has the full driver or not, however, it would be a good idea to use the v4l-dvb repository instead, as that code is more up to date.
Mauro, does any current kernel contain these drivers yet? I've not been following v4l-dvb-->kernel merges.
Quoted 6 lines
Using Kradio I can manually tune in a station but the audio only comes out the Line Out jack on the card. Alsa is installed and working, I can play CD's, listen to streaming music, KDE sound effects work, so it appears my sound subsystem is working. The alsa config in Kradio is set to what it determined and it appears to match the device as far as things go.
The first thing that comes to mind here is that Kradio chose the wrong audio device but made it look like it chose correctly. I seem to recall it doing the same thing on my box as well. This card provides audio via a digital stream, and the drivers put that stream on /dev/dsp1, so you must chose that as your capture card/device, and set the playback card/device to use your usual sound card.
Also, the current version of the driver no longer provides or requires the cx88-alsa module (it has apparently been merged with other parts of the driver). Don't try to load this module, as it will probably cause a bunch of errors and break things. I've just updated the KW120 article to reflect this change in driver behavior (and to fix some other errors on my part).
Quoted 5 lines
When I try to scan for stations it doesn't find any but I can tune to any local station and get it.
I also can't get the video (HDTV) to work either. When it starts up I get a:
At the present, you can't load both the digital- and analog-mode drivers at the same time - this card uses a "hybrid" tuner, which the drivers can't quite deal with properly yet (this is being worked on). The end result is that neither mode will work at all, or may work only intermittently (last time I tried, the result was unpredictable).
You must select one more or the other, and you must reboot the computer (actually, a hard power-off is better) when switching modes.
Basically, it boils down to blacklisting several modules and then loading either the cx8800 or cx88-dvb module (for analog or digital, respectively).
Quoted 3 lines
I also can't get the video (HDTV) to work either. When it starts up I get a:
[...]
When I run kdetv in a terminal window I see this:
[errors snipped]
Last time I tried to use it, KDETV only worked with analog video/TV and other v4l capture devices. For digital TV, you need to use something like Kaffeine/Xine, MythTV, etc. Basically any video player that can read from a DVB device.
Also note that KDETV, unless it's changed since I last looked, isn't aware of that separate digital stream for analog TV, so you probably won't get any audio from it. Most of the other TV programs are like this also. Kradio is aware of it, however, and worked fine for me last time I used it.
Quoted 4 lines
I've read the Wiki at http://www.linuxtv.org including the
http://www.linuxtv.org/wiki/index.php/KWorld_ATSC_120 info. I also downloaded the archived list messages back to January 2007 and looked through them for help.
I know it sounds a little Windows-ish, but since the driver is still experimental, and the ATSC 120 is kinda finicky, a reboot is the first thing to do here, just to get the card back into a predictable state. Get the blacklist into place before you do that, check after the reboot to make sure that worked, then try just the analog mode. One that works, reboot again, enable digital mode, and scan for channels with dvbscan or whatever your distro calls it.
Stuart and I wrote most of what's in the ATSC 120 info page, so if it didn't work for you, I'd like to see if we can figure out what went wrong, so I can update the page to address the problem. I'm kinda partial to the idea of seeing this card working fully for those who have one. :-)
Signature · 8 lines
"Life is full of positive and negative events. Spend your time considering the former, not the latter." Vanessa Ezekowitz <[email protected]> -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Hi,
Thanks yo the reply. I had read through all your posts from back in February and did see you got it working. I've got a few questions.
Quoted 11 lines · Vanessa Ezekowitz
Quoted 4 lines · Curt Blank
I'm trying to get this card working and I'm having some trouble and I'm not sure exactly where. I'm using the 2.6.26.5 kernel gen'd to include all the v4l support.
I don't know if that version of the kernel has the full driver or not, however, it would be a good idea to use the v4l-dvb repository instead, as that code is more up to date.
Mauro, does any current kernel contain these drivers yet? I've not been following v4l-dvb-->kernel merges.
I looked at the cx88_cards.c code and I see it has the Kworld PlusTV HD PCI 120 (ATSC 120) card listed in it. It looks to me it was included since 2.6.26. I do have the v4l code fro the repository, I was experimenting with using it in the 2.6.25.22 kernel but decided 2.6.26.5 might be better. If I don't have any luck with you suggestions and the 2.6.26.5 code I'll switch back to the repository code.
Quoted 10 lines
Quoted 7 lines
Using Kradio I can manually tune in a station but the audio only comes
out the Line Out jack on the card. Alsa is installed and working, I can play CD's, listen to streaming music, KDE sound effects work, so it appears my sound subsystem is working. The alsa config in Kradio is set
to what it determined and it appears to match the device as far as
things go.The first thing that comes to mind here is that Kradio chose the wrong audio device but made it look like it chose correctly. I seem to recall it doing the same thing on my box as well. This card provides audio via a digital stream, and the drivers put that stream on
/dev/dsp1, so you must chose that as your capture card/device, and set the playback card/device to use your usual sound card.
So this card follows the oss format instead of the alas format? I wasn't sure which one to use. I switched Kradio's V4L Config Options to use OSS and tried both /dev/dsp and /dev/dsp1 and there is no sound. I had experimented with this before also.
Quoted 8 lines
Also, the current version of the driver no longer provides or requires the cx88-alsa module (it has apparently been merged with other parts of the driver). Don't try to load this module, as it will probably cause a bunch of errors and break things. I've just updated the KW120 article to reflect this change in driver behavior (and to fix some other errors on my part).
Quoted 5 lines
When I try to scan for stations it doesn't find any but I can tune to any local station and get it.
I also can't get the video (HDTV) to work either. When it starts up I get a:
Quoted 6 lines
At the present, you can't load both the digital- and analog-mode drivers at the same time - this card uses a "hybrid" tuner, which the drivers can't quite deal with properly yet (this is being worked on). The end result is that neither mode will work at all, or may work only intermittently (last time I tried, the result was unpredictable).
You must select one more or the other, and you must reboot the computer (actually, a hard power-off is better) when switching modes.
Basically, it boils down to blacklisting several modules and then loading either the cx8800 or cx88-dvb module (for analog or digital, respectively).
I did experiment with the blacklisting and I did notice that I could listen to the radio (through the cards line out) when the cx8800 was loaded without the cx88-alsa module loaded. At the moment I have blacklisted everything, powered down and now only have the cx8800 module loaded.
Quoted 7 lines
Quoted 6 lines
I also can't get the video (HDTV) to work either. When it starts up I get a:
[...]
When I run kdetv in a terminal window I see this:
Quoted 6 lines
[errors snipped]
Last time I tried to use it, KDETV only worked with analog video/TV and other v4l capture devices. For digital TV, you need to use something like Kaffeine/Xine, MythTV, etc. Basically any video player that can read from a DVB device.
Also note that KDETV, unless it's changed since I last looked, isn't aware of that separate digital stream for analog TV, so you probably won't get any audio from it. Most of the other TV programs are like this also. Kradio is aware of it, however, and worked fine for me last time I used it.
I do have kaffine and xine, I will try that when I get a chance later today.
Quoted 11 lines
Quoted 6 lines
I've read the Wiki at http://www.linuxtv.org including the
http://www.linuxtv.org/wiki/index.php/KWorld_ATSC_120 info. I also downloaded the archived list messages back to January 2007 and looked through them for help.I know it sounds a little Windows-ish, but since the driver is still experimental, and the ATSC 120 is kinda finicky, a reboot is the first thing to do here, just to get the card back into a predictable state. Get the blacklist into place before you do that, check after the reboot to make sure that worked, then try just the analog mode. One that works, reboot again, enable digital mode, and scan for channels with dvbscan or whatever your distro calls it.
Stuart and I wrote most of what's in the ATSC 120 info page, so if it didn't work for you, I'd like to see if we can figure out what went wrong, so I can update the page to address the problem. I'm kinda partial to the idea of seeing this card working fully for those who have one. :-)
Thanks. I'll work on all your suggestions more in depth when I have more time later today and over the weekend and report back. The first thing I'd like to get working as a stepping stone is the sound not using the cards line out. I've been trying this in a box using that MSI MB, it's going to be used in different box with an Asus m3a78-em MB that should be arriving today so I will probably move to that. I've had some issues with MSI MB's and media cards (video) in the last year where they did not work and that's why I've switched back to Asus.
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 63 lines · Curt Blank
Hi,
Thanks yo the reply. I had read through all your posts from back in February and did see you got it working. I've got a few questions.
Quoted 11 lines · Vanessa Ezekowitz
Quoted 4 lines · Curt Blank
I'm trying to get this card working and I'm having some trouble and I'm not sure exactly where. I'm using the 2.6.26.5 kernel gen'd to include all the v4l support.
I don't know if that version of the kernel has the full driver or not, however, it would be a good idea to use the v4l-dvb repository instead, as that code is more up to date.
Mauro, does any current kernel contain these drivers yet? I've not been following v4l-dvb-->kernel merges.
I looked at the
cx88_cards.ccode and I see it has the Kworld PlusTV HD PCI 120 (ATSC 120) card listed in it. It looks to me it was included since 2.6.26. I do have the v4l code fro the repository, I was experimenting with using it in the 2.6.25.22 kernel but decided 2.6.26.5 might be better. If I don't have any luck with you suggestions and the 2.6.26.5 code I'll switch back to the repository code.Quoted 10 lines
Quoted 7 lines
Using Kradio I can manually tune in a station but the audio only comes
out the Line Out jack on the card. Alsa is installed and working, I can play CD's, listen to streaming music, KDE sound effects work, so it appears my sound subsystem is working. The alsa config in Kradio is set
to what it determined and it appears to match the device as far as
things go.The first thing that comes to mind here is that Kradio chose the
wrong audio device but made it look like it chose correctly. I seem to recall it doing the same thing on my box as well. This card provides audio via a digital stream, and the drivers put that stream on/dev/dsp1, so you must chose that as your capture card/device, and set the playback card/device to use your usual sound card.So this card follows the oss format instead of the alas format? I wasn't sure which one to use. I switched Kradio's V4L Config Options to use OSS and tried both
/dev/dspand/dev/dsp1and there is no sound. I had experimented with this before also.Quoted 8 lines
Also, the current version of the driver no longer provides or requires the cx88-alsa module (it has apparently been merged with other parts of the driver). Don't try to load this module, as it will probably cause a bunch of errors and break things. I've just updated the KW120 article to reflect this change in driver behavior (and to fix some other errors on my part).
Quoted 5 lines
When I try to scan for stations it doesn't find any but I can tune to any local station and get it.
I also can't get the video (HDTV) to work either. When it starts up I get a:
Quoted 6 lines
At the present, you can't load both the digital- and analog-mode drivers at the same time - this card uses a "hybrid" tuner, which the drivers can't quite deal with properly yet (this is being worked on). The end result is that neither mode will work at all, or may work only intermittently (last time I tried, the result was unpredictable).
You must select one more or the other, and you must reboot the computer (actually, a hard power-off is better) when switching modes.
Basically, it boils down to blacklisting several modules and then loading either the cx8800 or cx88-dvb module (for analog or digital, respectively).
I did experiment with the blacklisting and I did notice that I could listen to the radio (through the cards line out) when the cx8800 was loaded without the cx88-alsa module loaded. At the moment I have blacklisted everything, powered down and now only have the cx8800 module loaded.
Quoted 6 lines
Quoted 5 lines
I also can't get the video (HDTV) to work either. When it starts up I get a:
[...]
When I run kdetv in a terminal window I see this:Quoted 6 lines
[errors snipped]
Last time I tried to use it, KDETV only worked with analog video/TV and other v4l capture devices. For digital TV, you need to use something like Kaffeine/Xine, MythTV, etc. Basically any video player that can read from a DVB device.
Also note that KDETV, unless it's changed since I last looked, isn't aware of that separate digital stream for analog TV, so you probably won't get any audio from it. Most of the other TV programs are like this also. Kradio is aware of it, however, and worked fine for me last time I used it.
I do have kaffine and xine, I will try that when I get a chance later today.
Quoted 7 lines
Quoted 6 lines
I've read the Wiki at http://www.linuxtv.org including the
http://www.linuxtv.org/wiki/index.php/KWorld_ATSC_120 info. I also downloaded the archived list messages back to January 2007 and looked through them for help.
Quoted 6 lines
Quoted 4 lines
I know it sounds a little Windows-ish, but since the driver is still experimental, and the ATSC 120 is kinda finicky, a reboot is the first thing to do here, just to get the card back into a predictable state. Get the blacklist into place before you do that, check after the reboot to make sure that worked, then try just the analog mode. One that works, reboot again, enable digital mode, and scan for channels with dvbscan or whatever your distro calls it.
Stuart and I wrote most of what's in the ATSC 120 info page, so if it didn't work for you, I'd like to see if we can figure out what went wrong, so I can update the page to address the problem. I'm kinda partial to the idea of seeing this card working fully for those who have one. :-)
Thanks. I'll work on all your suggestions more in depth when I have more time later today and over the weekend and report back. The first thing I'd like to get working as a stepping stone is the sound not using the cards line out. I've been trying this in a box using that MSI MB, it's going to be used in different box with an Asus m3a78-em MB that should be arriving today so I will probably move to that. I've had some issues with MSI MB's and media cards (video) in the last year where they did not work and that's why I've switched back to Asus.
I've got the new computer built, with the 2.6.26.5 kernel, v4l not gen'd in and using the latest from the repository.
Using Kradio I still can only listen to it via the Line Out on the 120's board.
When I run kaffeine I get a pop up window with this:
No plugin found to handle this resource (/dev/video)
17:59:33: xine: couldn't find demux for >file:///dev/video<
17:59:33: xine: found input plugin : file input plugin
When I run xawtv I get this:
# xawtv This is xawtv-3.95, running on Linux/x86_64 (2.6.26.5-touch) xinerama 0: 1024x768+0+0 /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway ioctl: VIDIOC_REQBUFS(count=2;type=VIDEO_CAPTURE;memory=MMAP): Success ioctl: VIDIOC_REQBUFS(count=2;type=VIDEO_CAPTURE;memory=MMAP): Resource temporarily unavailable
And I still get the "Unable to grab video." pop up form kdetv.
Ideas? Am I missing something?
I blacklisted cx8800, cx8802, cx88-alsa, & cx88-dvb on boot, then moved the blacklist file then only modprobed cx8800. That and cx88xx are the only ones loaded.
I have this in my modprobe.d/tv file:
alias char-major-81 videodev
options i2c-algo-bit bit_test=1
alias char-major-81-0 cx8800
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
Thanks.
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 53 lines · Vanessa Ezekowitz
Quoted 40 lines · Curt Blank
I've got the new computer built, with the 2.6.26.5 kernel, v4l not gen'd in and using the latest from the repository.
Using Kradio I still can only listen to it via the Line Out on the 120's board.
When I run kaffeine I get a pop up window with this:
No plugin found to handle this resource (
/dev/video)17:59:33: xine: couldn't find demux for >file:///dev/video<
17:59:33: xine: found input plugin : file input plugin
When I run xawtv I get this:
# xawtv This is xawtv-3.95, running on Linux/x86_64 (2.6.26.5-touch) xinerama 0: 1024x768+0+0 /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway ioctl: VIDIOC_REQBUFS(count=2;type=VIDEO_CAPTURE;memory=MMAP): Success ioctl: VIDIOC_REQBUFS(count=2;type=VIDEO_CAPTURE;memory=MMAP): Resource temporarily unavailableAnd I still get the "Unable to grab video." pop up form kdetv.
Ideas? Am I missing something?
I blacklisted cx8800, cx8802, cx88-alsa, & cx88-dvb on boot, then moved the blacklist file then only modprobed cx8800. That and cx88xx are the only ones loaded.
I have this in my modprobe.d/tv file:
alias char-major-81 videodev
options i2c-algo-bit bit_test=1Quoted 7 lines
alias char-major-81-0 cx8800
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 offThanks.
Something odd is happening then - there should be a fair number of other modules that got brought in with cx8800, like
tuner_xc2028, tuner,v4l2_common, videodev, and others.
Quoted 9 lines
Can you copy&paste dmesg and lsmod outputs as they look after a fresh reboot and having loaded the modules?
I also have a feeling I'm wrong about cx88-alsa not being needed...
V4l team: Is or is not cx88-alsa still part of the usual modules that must be loaded (either manually or automatically)? If it is, did something merely break recently that made it disappear from the output of the build?
/me is confused.
Um, sorry, there are a bunch of other modules loaded too. I was just referring to the Conexant related modules.
Below is the info requested, but it doesn't look like hte dmesg output is of much help.
Oh and I noticed here: http://linuxtv.org/wiki/index.php/ATSC_PCI_Cards that the 120 card isn't listed, it would be easier to find I think if it was. oh and you asked the v4l team but it looks like this message cam only to me?? (I cc'd my reply.)
lsmod before
Module Size Used by iptable_filter 19968 0 ip_tables 34064 1 iptable_filter ip6_tables 35728 0 x_tables 38280 2 ip_tables,ip6_tables snd_pcm_oss 60672 0 snd_mixer_oss 32000 1 snd_pcm_oss binfmt_misc 26252 1 snd_seq 72208 0 it87 40088 0 snd_seq_device 24724 1 snd_seq hwmon_vid 19840 1 it87 cpufreq_conservative 24328 0 cpufreq_userspace 22916 0 cpufreq_powersave 18944 0 powernow_k8 29956 1 fuse 66880 1 loop 32396 0 dm_mod 72288 0 snd_hda_intel 469804 2 usbhid 58192 1 snd_pcm 101512 2 snd_pcm_oss,snd_hda_intel snd_timer 39952 2 snd_seq,snd_pcm hid 54688 1 usbhid snd_page_alloc 26128 2 snd_hda_intel,snd_pcm rtc_cmos 27064 0 ff_memless 22024 1 usbhid rtc_core 35252 1 rtc_cmos rtc_lib 20096 1 rtc_core sr_mod 31156 0 snd_hwdep 25096 1 snd_hda_intel floppy 74792 0 snd 84216 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep i2c_piix4 25616 0 serio_raw 22660 0 usbtouchscreen 26756 0 k8temp 21760 0 fglrx 2058956 28 ohci1394 45364 0 sg 48976 0 usb_storage 142064 0 cdrom 50856 1 sr_mod i2c_core 40480 1 i2c_piix4 soundcore 24464 1 snd shpchp 47392 0 button 24480 0 r8169 43652 0 wmi 24256 0 ieee1394 106984 1 ohci1394 pci_hotplug 44472 1 shpchp raid456 140576 0 async_xor 20992 1 raid456 async_memcpy 19456 1 raid456 async_tx 24420 3 raid456,async_xor,async_memcpy xor 22288 2 raid456,async_xor raid0 23424 0 ehci_hcd 50060 0 ohci_hcd 37892 0 usbcore 162392 7 usbhid,usbtouchscreen,usb_storage,ehci_hcd,ohci_hcd sd_mod 41648 24 edd 26000 0 raid1 38016 11 reiserfs 230224 10 fan 22152 0 ahci 45192 22 pata_atiixp 22400 0 libata 181184 2 ahci,pata_atiixp scsi_mod 174680 5 sr_mod,sg,usb_storage,sd_mod,libata dock 26656 1 libata thermal 37792 0 processor 64704 2 powernow_k8,thermal
dmesg after modprobe cx8800
usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x484 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x485 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x485 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x486 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x486 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x487 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x487 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x488 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x488 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x489 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x489 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x48a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x48b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x48c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. Linux video capture interface: v2.00 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x48d L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x48e L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x48f L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x48f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x490 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x490 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x491 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x491 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x492 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x492 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x493 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x493 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x494 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x494 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 20 (level, low) -> IRQ 20
cx88[0]: subsystem: 17de:08c1, board: Kworld PlusTV HD PCI 120 (ATSC 120) [card=67,autodetected] cx88[0]: TV tuner type 71, Radio tuner type -1
cx88[0]: Test OK
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 20, latency: 64, mmio: 0xfb000000 cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
firmware: requesting xc3028-v27.fw
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000.
cx88[0]: Calling XC2028/3028 callback
usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x495 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x495 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x496 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x496 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x497 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x497 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x498 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x498 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x499 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x499 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x49a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x49b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x49c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. xc2028 1-0061: Incorrect readback of firmware version.
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback
usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x49d L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x49e L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x49f L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x49f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4a0 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4a1 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4a2 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4a3 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4a4 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback
usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4a5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4a6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4a7 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4a8 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4a9 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4a9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4aa L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4aa R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4ab L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ab R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ac L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ac R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4ad L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ad R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ae L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ae R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4af L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4af R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4b0 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4b1 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4b2 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4b3 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4b4 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4b5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4b6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4b7 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4b8 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4b9 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4b9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ba L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ba R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4bb L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4bb R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4bc L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4bc R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4bd L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4bd R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4be L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4be R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4bf L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4bf R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4c0 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4c1 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4c2 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4c3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4c4 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4c5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4c6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4c7 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4c8 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4c9 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4c9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ca L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ca R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4cb L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4cb R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4cc L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4cc R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4cd L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4cd R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ce L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ce R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4cf L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4cf R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4d0 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4d1 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4d2 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4d3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4d4 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4d5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4d6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4d7 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4d8 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4d9 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4d9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4da L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4da R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4db L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4db R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4dc L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4dc R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4dd L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4dd R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4de L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4de R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4df L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4df R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4e0 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4e1 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4e2 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4e3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4e4 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4e5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4e6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4e7 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4e8 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4e9 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4e9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ea L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ea R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4eb L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4eb R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ec L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ec R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4ed L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ed R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4ee L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ee R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4ef L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ef R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4f0 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4f1 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4f2 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4f3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4f4 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4f5 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f5 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4f6 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f6 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4f7 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4f8 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f8 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4f9 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4f9 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4fa L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4fa R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4fb L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4fb R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4fc L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4fc R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4fd L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4fd R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x4fe L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4fe R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4ff L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4ff R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x500 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x500 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x501 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x501 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x502 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x502 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x503 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x503 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x504 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x504 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x505 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x505 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x506 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x506 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x507 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x507 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x508 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x508 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x509 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x509 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x50a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x50b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x50c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x50d L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x50e L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x50f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x50f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x510 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x510 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x511 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x511 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x512 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x512 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x513 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x513 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x514 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x514 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x515 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x515 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x516 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x516 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x517 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x517 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x518 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x518 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x519 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x519 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x51a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x51b L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x51c L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x51d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x51e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x51f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x51f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x520 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x520 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x521 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x521 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x522 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x522 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x523 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x523 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x524 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x524 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x525 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x525 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x526 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x526 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x527 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x527 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x528 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x528 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x529 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x529 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x52a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x52b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x52c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x52d L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x52e L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x52f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x52f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x530 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x530 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x531 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x531 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x532 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x532 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x533 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x533 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x534 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x534 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x535 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x535 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x536 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x536 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x537 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x537 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x538 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x538 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x539 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x539 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x53a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x53b L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x53c L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x53d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x53e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x53f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x53f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x540 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x540 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x541 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x541 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x542 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x542 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x543 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x543 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x544 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x544 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x545 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x545 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x546 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x546 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x547 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x547 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x548 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x548 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x549 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x549 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x54a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x54b L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x54c L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x54d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x54e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x54f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x54f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x550 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x550 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x551 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x551 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x552 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x552 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x553 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x553 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x554 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x554 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x555 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x555 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x556 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x556 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x557 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x557 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x558 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x558 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x559 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x559 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x55a L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x55b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x55c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x55d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x55e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x55f L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x55f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x560 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x560 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x561 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x561 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x562 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x562 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x563 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x563 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x564 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x564 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x565 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x565 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x566 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x566 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x567 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x567 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x568 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x568 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x569 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x569 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x56a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x56b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x56c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x56d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x56e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x56f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x56f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x570 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x570 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x571 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x571 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x572 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x572 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x573 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x573 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x574 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x574 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x575 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x575 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x576 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x576 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x577 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x577 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x578 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x578 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x579 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x579 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x57a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x57b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x57c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x57d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x57e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x57f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x57f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x580 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x580 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x581 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x581 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x582 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x582 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x583 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x583 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x584 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x584 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x585 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x585 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x586 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x586 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x587 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x587 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x588 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x588 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x589 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x589 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x58a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x58b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x58c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x58d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x58e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x58f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x58f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x590 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x590 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x591 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x591 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x592 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x592 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x593 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x593 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x594 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x594 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x595 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x595 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x596 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x596 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x597 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x597 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x598 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x598 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x599 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x599 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x59a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59a R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x59b L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59b R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x59c L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59c R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x59d L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59d R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x59e L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59e R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x59f L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x59f R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x5a0 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x5a0 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x5a1 L 0 F 0 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x5a1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x5a2 L 18 F 128 Trg 0 LUN 1 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x5a2 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x5a3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x5a3 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x5a4 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x5a4 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 usb-storage: Not Ready: Medium not present usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping.
lsmod after
Module Size Used by tuner_xc2028 35504 1 firmware_class 25216 1 tuner_xc2028 tuner 41804 0 cx8800 50084 0 cx88xx 85928 1 cx8800 ir_common 60292 1 cx88xx i2c_algo_bit 22916 1 cx88xx tveeprom 30212 1 cx88xx compat_ioctl32 24832 1 cx8800 videodev 51456 4 tuner,cx8800,cx88xx,compat_ioctl32 v4l1_compat 29828 1 videodev v4l2_common 29952 2 tuner,cx8800 videobuf_dma_sg 29828 2 cx8800,cx88xx videobuf_core 36100 3 cx8800,cx88xx,videobuf_dma_sg btcx_risc 21384 2 cx8800,cx88xx iptable_filter 19968 0 ip_tables 34064 1 iptable_filter ip6_tables 35728 0 x_tables 38280 2 ip_tables,ip6_tables snd_pcm_oss 60672 0 snd_mixer_oss 32000 1 snd_pcm_oss binfmt_misc 26252 1 snd_seq 72208 0 it87 40088 0 snd_seq_device 24724 1 snd_seq hwmon_vid 19840 1 it87 cpufreq_conservative 24328 0 cpufreq_userspace 22916 0 cpufreq_powersave 18944 0 powernow_k8 29956 1 fuse 66880 1 loop 32396 0 dm_mod 72288 0 snd_hda_intel 469804 2 usbhid 58192 1 snd_pcm 101512 2 snd_pcm_oss,snd_hda_intel snd_timer 39952 2 snd_seq,snd_pcm hid 54688 1 usbhid snd_page_alloc 26128 2 snd_hda_intel,snd_pcm rtc_cmos 27064 0 ff_memless 22024 1 usbhid rtc_core 35252 1 rtc_cmos rtc_lib 20096 1 rtc_core sr_mod 31156 0 snd_hwdep 25096 1 snd_hda_intel floppy 74792 0 snd 84216 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep i2c_piix4 25616 0 serio_raw 22660 0 usbtouchscreen 26756 0 k8temp 21760 0 fglrx 2058956 28 ohci1394 45364 0 sg 48976 0 usb_storage 142064 0 cdrom 50856 1 sr_mod i2c_core 40480 7 tuner_xc2028,tuner,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_piix4 soundcore 24464 1 snd shpchp 47392 0 button 24480 0 r8169 43652 0 wmi 24256 0 ieee1394 106984 1 ohci1394 pci_hotplug 44472 1 shpchp raid456 140576 0 async_xor 20992 1 raid456 async_memcpy 19456 1 raid456 async_tx 24420 3 raid456,async_xor,async_memcpy xor 22288 2 raid456,async_xor raid0 23424 0 ehci_hcd 50060 0 ohci_hcd 37892 0 usbcore 162392 7 usbhid,usbtouchscreen,usb_storage,ehci_hcd,ohci_hcd sd_mod 41648 24 edd 26000 0 raid1 38016 11 reiserfs 230224 10 fan 22152 0 ahci 45192 22 pata_atiixp 22400 0 libata 181184 2 ahci,pata_atiixp scsi_mod 174680 5 sr_mod,sg,usb_storage,sd_mod,libata dock 26656 1 libata thermal 37792 0 processor 64704 2 powernow_k8,thermal
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 2 lines · Curt Blank
Um, sorry, there are a bunch of other modules loaded too. I was just referring to the Conexant related modules.
Ah ok. Looking at the output of lsmod, it looks like everything loaded ok, and the messages from dmesg look right too.
/me is even more confused.
Quoted 2 lines
Below is the info requested, but it doesn't look like hte dmesg output is of much help.
After stripping out the usb-storage messages, what's left may be of use to the others here on the list.
Quoted 3 lines
Oh and I noticed here: http://linuxtv.org/wiki/index.php/ATSC_PCI_Cards
that the 120 card isn't listed, it would be easier to find I think if it was.
It's below the main table, in the "Likely work as is.." section, under "Experimental". I'll create an entry in the main table once we get everything working right.
Quoted 2 lines
oh and you asked the v4l team but it looks like this message cam only to me?? (I cc'd my reply.)
oooooops - my fault. Next time, maybe I should check the "to" address before I commit the message. :-)
Anyways, I forwarded our discussion to the v4l-dvb list so we can get more eyes on this issue. If you're not on that list, you might wish to join it:
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Signature · 8 lines
"Life is full of positive and negative events. Spend your time considering the former, not the latter." Vanessa Ezekowitz <[email protected]> _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 35 lines · Vanessa Ezekowitz
Quoted 3 lines · Curt Blank
Um, sorry, there are a bunch of other modules loaded too. I was just referring to the Conexant related modules.
Ah ok. Looking at the output of lsmod, it looks like everything loaded ok, and the messages from dmesg look right too.
/me is even more confused.
Quoted 3 lines
Below is the info requested, but it doesn't look like hte dmesg output is of much help.
After stripping out the usb-storage messages, what's left may be of use to the others here on the list.
Quoted 4 lines
Oh and I noticed here: http://linuxtv.org/wiki/index.php/ATSC_PCI_Cards
that the 120 card isn't listed, it would be easier to find I think if it was.It's below the main table, in the "Likely work as is.." section, under "Experimental". I'll create an entry in the main table once we get everything working right.
Quoted 3 lines
oh and you asked the v4l team but it looks like this message cam only to me?? (I cc'd my reply.)
Quoted 9 lines
oooooops - my fault. Next time, maybe I should check the "to" address before I commit the message. :-)
Anyways, I forwarded our discussion to the v4l-dvb list so we can get more eyes on this issue. If you're not on that list, you might wish to join it:
[Had to resend, I wasn't subscribed to linux-dvb.]
I just did another modprobe of the cx8800 module after a reboot and grep -v'd all the usb stuff (which I'll have to look into as to why it's doing that, new machine, new memory card reader). Anyway below is the results of the modprobe.
Oh and do I need the cx88-alsa module?
Oh oh and, I really do appreciate your help. :)
Sep 21 01:27:26 touch kernel: Linux video capture interface: v2.00 Sep 21 01:27:27 touch kernel: cx88/0: cx2388x v4l2 driver version 0.0.6 loaded Sep 21 01:27:27 touch kernel: ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 21 01:27:27 touch kernel: cx88[0]: subsystem: 17de:08c1, board: Kworld PlusTV HD PCI 120 (ATSC 120) [card=67,autodetected] Sep 21 01:27:27 touch kernel: cx88[0]: TV tuner type 71, Radio tuner type -1 Sep 21 01:27:27 touch kernel: cx88[0]: Test OK Sep 21 01:27:27 touch kernel: tuner' 1-0061: chip found @ 0xc2 (cx88[0]) Sep 21 01:27:27 touch kernel: xc2028 1-0061: creating new instance Sep 21 01:27:27 touch kernel: xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner Sep 21 01:27:27 touch kernel: cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw Sep 21 01:27:27 touch kernel: cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 20, latency: 64, mmio: 0xfb000000 Sep 21 01:27:27 touch kernel: cx88[0]/0: registered device video0 [v4l2] Sep 21 01:27:27 touch kernel: cx88[0]/0: registered device vbi0 Sep 21 01:27:27 touch kernel: cx88[0]/0: registered device radio0 Sep 21 01:27:27 touch kernel: firmware: requesting xc3028-v27.fw Sep 21 01:27:27 touch kernel: xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 Sep 21 01:27:27 touch kernel: cx88[0]: Calling XC2028/3028 callback Sep 21 01:27:27 touch kernel: xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. Sep 21 01:27:27 touch kernel: cx88[0]: Calling XC2028/3028 callback Sep 21 01:27:29 touch kernel: xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. Sep 21 01:27:29 touch kernel: SCODE (20000000), id 000000000000b700: Sep 21 01:27:29 touch kernel: xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. Sep 21 01:27:29 touch kernel: cx88[0]: Calling XC2028/3028 callback Sep 21 01:27:29 touch kernel: cx88[0]: Calling XC2028/3028 callback Sep 21 01:27:29 touch kernel: xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. Sep 21 01:27:29 touch kernel: cx88[0]: Calling XC2028/3028 callback Sep 21 01:27:31 touch kernel: xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. Sep 21 01:27:31 touch kernel: cx88[0]: Calling XC2028/3028 callback
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I demand that Curt Blank may or may not have written...
[snip]
Quoted 3 lines
When I run kaffeine I get a pop up window with this:
No plugin found to handle this resource (
/dev/video)
You need to prefix that with "v4l:/".
[snip]
Signature · 10 lines
| Darren Salt | linux or ds at | nr. Ashington, | Toon | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army | + Output less CO2 => avoid massive flooding. TIME IS RUNNING OUT *FAST*. "I just criticise other people's patches." - Linus Torvalds, lkml -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 8 lines · Darren Salt
I demand that Curt Blank may or may not have written...
[snip]
Quoted 2 lines
When I run kaffeine I get a pop up window with this:
Quoted 7 lines
Quoted 2 lines
No plugin found to handle this resource (
/dev/video)You need to prefix that with "v4l:/".
[snip]
That doesn't seen to help, still get a pop up window with "No plugin found to handle this resource (v4l:/dev/video)"
Then the details say "xine: cannot find input plugin for MRL [v4l:/dev/video]"
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
I demand that Curt Blank may or may not have written...
Quoted 10 lines
Quoted 6 lines · Darren Salt
I demand that Curt Blank may or may not have written... [snip]
Quoted 2 lines
When I run kaffeine I get a pop up window with this:
No plugin found to handle this resource (/dev/video)You need to prefix that with "v4l:/".
[snip]That doesn't seen to help, still get a pop up window with "No plugin found to handle this resource (v4l:/dev/video)"
[snip]
More information needed. Run it from an X terminal and in verbose mode (might be -v, might be --verbose, might be something else; check the docs) and see what output it produces.
Signature · 10 lines
| Darren Salt | linux or ds at | nr. Ashington, | Toon | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army | + Use more efficient products. Use less. BE MORE ENERGY EFFICIENT. Don't stop now, we might just as well lock the door and throw away the key. -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list