ARM: tegra: Remove second instance of uart clk

PATCH New Prashant Gaikwad 2 participants 3 messages Jun 25, 2012 – Jun 26, 2012

Subsystems (3)

Arm (32-bit) Arm sub-architectures Tegra architecture support

lore

Share & tools

lore

Prashant Gaikwad

author

2012-06-25 07:55 UTC #0 lore raw

PATCH 1/1 ARM: tegra: Remove second instance of uart clk

In Tegra30 clock file two clk objects were created for same UART clock. Remove the duplicates and add clock aliases instead.

Update the Tegra20 clock file to make the names consistent.

Signed-off-by Prashant Gaikwad <[email protected]>

---
 arch/arm/mach-tegra/tegra2_clocks.c  |   20 ++++++++++----------
 arch/arm/mach-tegra/tegra30_clocks.c |   20 ++++++++++----------
 2 files changed, 20 insertions(+), 20 deletions(-)

arch/arm/mach-tegra/tegra2_clocks.c +10 ~~-10~~

index b59315c..034d952 100644
@@ -2189,11 +2189,11 @@ static struct clk tegra_list_clks[] = {
 	PERIPH_CLK("i2c2_i2c",	"tegra-i2c.1",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
 	PERIPH_CLK("i2c3_i2c",	"tegra-i2c.2",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
 	PERIPH_CLK("dvc_i2c",	"tegra-i2c.3",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("uarta",	"uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartb",	"uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartc",	"uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartd",	"uart.3",		NULL,	65,	0x1c0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uarta",	"tegra-uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartb",	"tegra-uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartc",	"tegra-uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartd",	"tegra-uart.3",		NULL,	65,	0x1c0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uarte",	"tegra-uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
 	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
 	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("vi",	"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */

@@ -2245,11 +2245,11 @@ static struct clk tegra_list_clks[] = {
  * table under two names.
  */
 static struct clk_duplicate tegra_clk_duplicates[] = {
-	CLK_DUPLICATE("uarta",	"tegra_uart.0",	NULL),
-	CLK_DUPLICATE("uartb",	"tegra_uart.1",	NULL),
-	CLK_DUPLICATE("uartc",	"tegra_uart.2",	NULL),
-	CLK_DUPLICATE("uartd",	"tegra_uart.3",	NULL),
-	CLK_DUPLICATE("uarte",	"tegra_uart.4",	NULL),
+	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
+	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
+	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
+	CLK_DUPLICATE("uartd",  "serial8250.3", NULL),
+	CLK_DUPLICATE("uarte",  "serial8250.4", NULL),
 	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
 	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
 	CLK_DUPLICATE("usbd", "tegra-otg", NULL),

arch/arm/mach-tegra/tegra30_clocks.c +10 ~~-10~~

index e33fe4b..e1a7489 100644
@@ -2924,16 +2924,11 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
 	PERIPH_CLK("i2c4",	"tegra-i2c.3",		NULL,	103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
 	PERIPH_CLK("i2c5",	"tegra-i2c.4",		NULL,	47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("uarta",	"tegra_uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartb",	"tegra_uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartc",	"tegra_uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartd",	"tegra_uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarte",	"tegra_uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarta_dbg",	"serial8250.0",		"uarta", 6,	0x178,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartb_dbg",	"serial8250.0",		"uartb", 7,	0x17c,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartc_dbg",	"serial8250.0",		"uartc", 55,	0x1a0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartd_dbg",	"serial8250.0",		"uartd", 65,	0x1c0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarte_dbg",	"serial8250.0",		"uarte", 66,	0x1c4,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uarta",	"tegra-uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartb",	"tegra-uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartc",	"tegra-uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartd",	"tegra-uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uarte",	"tegra-uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
 	PERIPH_CLK_EX("vi",	"tegra_camera",		"vi",	20,	0x148,	425000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT,	&tegra_vi_clk_ops),
 	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
 	PERIPH_CLK("3d2",       "3d2",			NULL,	98,	0x3b0,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),

@@ -2983,6 +2978,11 @@ struct clk tegra_list_clks[] = {
  * table under two names.
  */
 struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
+	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
+	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
+	CLK_DUPLICATE("uartd",  "serial8250.3", NULL),
+	CLK_DUPLICATE("uarte",  "serial8250.4", NULL),
 	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
 	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
 	CLK_DUPLICATE("usbd", "tegra-otg", NULL),

Signature · 1 line

1.7.4.1

Stephen Warren

Applied

2012-06-25 18:31 UTC #1 lore raw

PATCH 1/1 ARM: tegra: Remove second instance of uart clk

Quoted 4 lines · Prashant Gaikwad

In Tegra30 clock file two clk objects were created for same UART clock. Remove the duplicates and add clock aliases instead.
Update the Tegra20 clock file to make the names consistent.

Thanks, applied to Tegra's for-3.6/common-clk since I assume your common clock work will depend on this.

Prashant G

author

2012-06-26 02:45 UTC #2 lore raw

PATCH 1/1 ARM: tegra: Remove second instance of uart clk

Quoted 7 lines · Stephen Warren

Quoted 4 lines · Prashant Gaikwad
In Tegra30 clock file two clk objects were created for same UART clock. Remove the duplicates and add clock aliases instead.
Update the Tegra20 clock file to make the names consistent.
Thanks, applied to Tegra's for-3.6/common-clk since I assume your common clock work will depend on this.

Thanks Stephen!!

Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html