Skip to contentSkip to conversation

Fix: brocken boot message at serial line on AT91SAM9263-EK board

PATCH New Jens Scharsig (BuS Elektronik) 2 participants 2 messages Mar 19, 2012 – Jun 28, 2012 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore

Jens Scharsig (BuS Elektronik)

author
#0 lore raw

PATCH 1/1 Fix: brocken boot message at serial line on AT91SAM9263-EK board

Signed-off-by Jens Scharsig (BuS Elektronik) <[email protected]>
---
 board/atmel/at91sam9263ek/at91sam9263ek.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
board/atmel/at91sam9263ek/at91sam9263ek.c +1 -1
index 41ec752..60ff1c0 100644
@@ -254,6 +254,7 @@ int board_early_init_f(void)
 		(1 << ATMEL_ID_PIOCDE),
 		&pmc->pcer);
 
+	at91_seriald_hw_init();
 	return 0;
 }
 

@@ -267,7 +268,6 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	at91sam9263ek_nand_hw_init();
 #endif
Signature · 1 line
1.7.3.4
#1 lore raw

PATCH 1/1 Fix: brocken boot message at serial line on AT91SAM9263-EK board

Dear Jens Scharsig,

Quoted 20 lines · Jens Scharsig (BuS Elektronik)
Signed-off-by Jens Scharsig (BuS Elektronik) <[email protected]>
---
 board/atmel/at91sam9263ek/at91sam9263ek.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
board/atmel/at91sam9263ek/at91sam9263ek.c +1 -0
index 41ec752..60ff1c0 100644
@@ -254,6 +254,7 @@ int board_early_init_f(void)
 		(1 << ATMEL_ID_PIOCDE),
 		&pmc->pcer);
 
+	at91_seriald_hw_init();
 	return 0;
 }

board/atmel/at91sam9263ek/at91sam9263ek.c int board_init(void) · line 273

Quoted 7 lines
board/atmel/at91sam9263ek/at91sam9263ek.c +0 -1
@@ -267,7 +268,6 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	at91sam9263ek_nand_hw_init();
 #endif

applied to u-boot-atmel/master, thanks!

Best regards

Andreas Bie?mann