doc: README.mx28_common: Add missing entry into Contents
PATCH v3 1/1 doc: README.mx28_common: Add missing entry into Contents
commit 419ea2d84 (mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file.
Add the missing entry for completeness.
---
Changes since v2:
- Use 'into NAND' also in the middle of text rather than only in the Content section Change since v1:
- Fix completion->completeness , for->into
doc/README.mx28_common | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
doc/README.mx28_common +3 -2
@@ -19,6 +19,7 @@ Contents 1) Prerequisites 2) Compiling U-Boot for a MX28 based board 3) Installation of U-Boot for a MX28 based board to SD card +4) Installation of U-Boot into NAND flash 1) Prerequisites ----------------
@@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch takes the sector number as an argument. -4) Installation of U-Boot for NAND flash ------------------------------------------------ +4) Installation of U-Boot into NAND flash +----------------------------------------- To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
Signature · 1 line
1.7.1
PATCH v3 1/1 doc: README.mx28_common: Add missing entry into Contents
Dear Fabio Estevam,
Quoted 7 lines
commit
419ea2d84(mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file.Add the missing entry for completeness.
Signed-off-by Fabio Estevam <[email protected]>
Please add my evil
Quoted 24 lines
---
Changes since v2:
- Use 'into NAND' also in the middle of text rather than only in the Content section Change since v1:
- Fixcompletion->completeness,for->intodoc/README.mx28_common | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)doc/README.mx28_common +1
-0@@ -19,6 +19,7 @@ Contents 1) Prerequisites 2) Compiling U-Boot for a MX28 based board 3) Installation of U-Boot for a MX28 based board to SD card +4) Installation of U-Boot into NAND flash 1) Prerequisites ----------------@@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the"mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch takes the sector number as an argument.
Quoted 8 lines
-4) Installation of U-Boot for NAND flash
------------------------------------------------
+4) Installation of U-Boot into NAND flash
+-----------------------------------------To boot a MX28 based board from NAND, set the boot mode DIP switches
according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
Best regards,
Marek Vasut
PATCH v3 1/1 doc: README.mx28_common: Add missing entry into Contents
Hi Stefano,
Quoted 6 lines · Marek Vasut
Dear Fabio Estevam,
Quoted 4 lines
commit
419ea2d84(mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file.
Quoted 7 lines
Quoted 3 lines
Add the missing entry for completeness.
Signed-off-by Fabio Estevam <[email protected]>Please add my evil
Acked-by Marek Vasut <[email protected]>
Could this one be applied?
Thanks,
Fabio Estevam
PATCH v3 1/1 doc: README.mx28_common: Add missing entry into Contents
Quoted 11 lines · Fabio Estevam
Hi Stefano,
Quoted 8 lines · Marek Vasut
Dear Fabio Estevam,
Quoted 6 lines
commit
419ea2d84(mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file.Add the missing entry for completeness.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Fabio Estevam <[email protected]>Please add my evil
Acked-by Marek Vasut <[email protected]>Could this one be applied?
Sure: applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================