Watchdog: OMAP: bootstatus fix for omap3 and changes for the current watchdog framework
v2 cover Watchdog: OMAP: bootstatus fix for omap3 and changes for the current watchdog framework
Hello,
The following patches based on the 3.5-rc6 from Wim, which focus on:
1 ) bootstatus fix for omap3,
2 ) omap-wdt framework update cater for the current framework
as Shubhrajyoti comments mentioned.
Regards,
Zumeng Chen (3):
Watchdog: Omap: Changes for the new watchdog framework
Watchdog: Omap: select watchdog core for framework change
Watchdog: Omap: get the bootstatus for OMAP2Plus
arch/arm/mach-omap2/prcm.c | 5 +- drivers/watchdog/Kconfig | 1 + drivers/watchdog/omap_wdt.c | 342 ++++++++++++++++--------------------------- drivers/watchdog/omap_wdt.h | 5 + 4 files changed, 133 insertions(+), 220 deletions(-)
Signature · 1 line
1.7.5.4
PATCH v2 1/3 Watchdog: Omap: Changes for the new watchdog framework
This patch implements the current watchdog framework for OMAP WDTimer, which factored out the common components, so the driver can just focus on the hardware related parts.
--- drivers/watchdog/omap_wdt.c | 342 ++++++++++++++++--------------------------- drivers/watchdog/omap_wdt.h | 5 + 2 files changed, 128 insertions(+), 219 deletions(-)
drivers/watchdog/omap_wdt.c +123 -219
@@ -24,6 +24,9 @@* * Copyright (c) 2005 David Brownell * Use the driver model and standard identifiers; handle bigger timeouts. +* +* Copyright (c) 2012 WindRiver +* Changes cater for the current watchdog framework. */ #define pr_fmt (fmt) KBUILD_MODNAME ": " fmt
@@ -33,7 +36,6 @@#include <linux/kernel.h> #include <linux/fs.h> #include <linux/mm.h> -#include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/reboot.h> #include <linux/init.h>
@@ -50,8 +52,6 @@#include "omap_wdt.h" -static struct platform_device *omap_wdt_dev; -static unsigned timer_margin;module_param (timer_margin, uint,0 );MODULE_PARM_DESC (timer_margin,"initial watchdog timeout (in seconds)" );
@@ -59,32 +59,14 @@ MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)");static unsigned int wdt_trgr_pattern =0x1234 ;static DEFINE_SPINLOCK (wdt_lock); -struct omap_wdt_dev { +struct omap_wdt_drvdata { +struct watchdog_device wdt;void __iomem *base;/* physical */ struct device *dev; -int omap_wdt_users;struct resource *mem; -struct miscdevice omap_wdt_miscdev; }; -static void omap_wdt_ping (struct omap_wdt_dev *wdev) -{ -void __iomem *base = wdev->base; - -/* wait for posted write to complete */ -while ((__raw_readl (base +OMAP_WATCHDOG_WPS )) &0x08 ) -cpu_relax (); - - wdt_trgr_pattern = ~wdt_trgr_pattern; -__raw_writel (wdt_trgr_pattern, (base +OMAP_WATCHDOG_TGR )); - -/* wait for posted write to complete */ -while ((__raw_readl (base +OMAP_WATCHDOG_WPS )) &0x08 ) -cpu_relax (); -/* reloaded WCRR from WLDR */ -} - -static void omap_wdt_enable (struct omap_wdt_dev *wdev) +static void omap_wdt_enable (struct omap_wdt_drvdata *wdev) {void __iomem *base = wdev->base;
@@ -98,7 +80,7 @@ static void omap_wdt_enable(struct omap_wdt_dev *wdev)cpu_relax (); } -static void omap_wdt_disable (struct omap_wdt_dev *wdev) +static void omap_wdt_disable (struct omap_wdt_drvdata *wdev) {void __iomem *base = wdev->base;
@@ -121,12 +103,19 @@ static void omap_wdt_adjust_timeout(unsigned new_timeout) timer_margin = new_timeout; } -static void omap_wdt_set_timeout (struct omap_wdt_dev *wdev) +static int omap_wdt_set_timeout (struct watchdog_device *wdt_dev, +unsigned int new_timeout) { -u32 pre_margin =GET_WLDR_VAL (timer_margin); -void __iomem *base = wdev->base; +u32 pre_margin; +struct omap_wdt_drvdata *omap_wdev =watchdog_get_drvdata (wdt_dev); +void __iomem *base = omap_wdev->base; -pm_runtime_get_sync (wdev->dev); +pm_runtime_get_sync (omap_wdev->dev); +omap_wdt_disable (omap_wdev); + +/* adjust timeout based on the new timeout */ +omap_wdt_adjust_timeout (new_timeout); + pre_margin =GET_WLDR_VAL (timer_margin);/* just count up at 32 KHz */ while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x04 )
@@ -136,147 +125,88 @@ static void omap_wdt_set_timeout(struct omap_wdt_dev *wdev)while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x04 )cpu_relax (); -pm_runtime_put_sync (wdev->dev); +omap_wdt_enable (omap_wdev); + wdt_dev->timeout = new_timeout; +pm_runtime_put_sync (omap_wdev->dev); +return 0 ; } -/* -* Allow only one task to hold it open -*/ -static int omap_wdt_open (struct inode *inode,struct file *file) +static int omap_wdt_ping (struct watchdog_device *wdt_dev) { -struct omap_wdt_dev *wdev =platform_get_drvdata (omap_wdt_dev); -void __iomem *base = wdev->base; - -if (test_and_set_bit (1 , (unsigned long *)&(wdev->omap_wdt_users))) -return -EBUSY ; - -pm_runtime_get_sync (wdev->dev); +struct omap_wdt_drvdata *omap_wdev =watchdog_get_drvdata (wdt_dev); +void __iomem *base = omap_wdev->base; -/* initialize prescaler */ -while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x01 ) -cpu_relax (); +pm_runtime_get_sync (omap_wdev->dev); +spin_lock (&wdt_lock); -__raw_writel ((1 <<5 ) | (PTV <<2 ), base +OMAP_WATCHDOG_CNTRL ); -while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x01 ) +/* wait for posted write to complete */ +while ((__raw_readl (base +OMAP_WATCHDOG_WPS )) &0x08 )cpu_relax (); - file->private_data = (void *) wdev; + wdt_trgr_pattern = ~wdt_trgr_pattern; +__raw_writel (wdt_trgr_pattern, (base +OMAP_WATCHDOG_TGR )); -omap_wdt_set_timeout (wdev); -omap_wdt_ping (wdev);/* trigger loading of new timeout value */ -omap_wdt_enable (wdev); +/* wait for posted write to complete */ +/* reloaded WCRR from WLDR */ +while ((__raw_readl (base +OMAP_WATCHDOG_WPS )) &0x08 ) +cpu_relax (); -pm_runtime_put_sync (wdev->dev); +spin_unlock (&wdt_lock); +pm_runtime_put_sync (omap_wdev->dev); -return nonseekable_open (inode, file); +return 0 ; } -static int omap_wdt_release (struct inode *inode,struct file *file) +static int omap_wdt_start (struct watchdog_device *wdt_dev) { -struct omap_wdt_dev *wdev = file->private_data; +struct omap_wdt_drvdata *omap_wdev =watchdog_get_drvdata (wdt_dev); +void __iomem *base = omap_wdev->base; -/* -* Shut off the timer unless NOWAYOUT is defined. -*/ -#ifndef CONFIG_WATCHDOG_NOWAYOUT -pm_runtime_get_sync (wdev->dev); +pm_runtime_get_sync (omap_wdev->dev); +/* initialize prescaler */ +while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x01 ) +cpu_relax (); -omap_wdt_disable (wdev); +__raw_writel ((1 <<5 ) | (PTV <<2 ), base +OMAP_WATCHDOG_CNTRL ); +while (__raw_readl (base +OMAP_WATCHDOG_WPS ) &0x01 ) +cpu_relax (); -pm_runtime_put_sync (wdev->dev); -#else -pr_crit ("Unexpected close, not stopping!\n" ); -#endif - wdev->omap_wdt_users =0 ; +omap_wdt_set_timeout (&omap_wdev->wdt, timer_margin); +pm_runtime_put_sync (omap_wdev->dev);return 0 ; } -static ssize_t omap_wdt_write (struct file *file,const char __user *data, -size_t len,loff_t *ppos) +static int omap_wdt_stop (struct watchdog_device *wdt_dev) { -struct omap_wdt_dev *wdev = file->private_data; - -/* Refresh LOAD_TIME. */ -if (len) { -pm_runtime_get_sync (wdev->dev); -spin_lock (&wdt_lock); -omap_wdt_ping (wdev); -spin_unlock (&wdt_lock); -pm_runtime_put_sync (wdev->dev); - } -return len; -} +struct omap_wdt_drvdata *omap_wdev =watchdog_get_drvdata (wdt_dev); -static long omap_wdt_ioctl (struct file *file,unsigned int cmd, -unsigned long arg) -{ -struct omap_wdt_dev *wdev; -int new_margin; -static const struct watchdog_info ident = { - .identity ="OMAP Watchdog" , - .options =WDIOF_SETTIMEOUT , - .firmware_version =0 , - }; - - wdev = file->private_data; - -switch (cmd) { -case WDIOC_GETSUPPORT : -return copy_to_user ((struct watchdog_info __user *)arg, &ident, -sizeof (ident)); -case WDIOC_GETSTATUS : -return put_user (0 , (int __user *)arg); -case WDIOC_GETBOOTSTATUS : -if (cpu_is_omap16xx ()) -return put_user (__raw_readw (ARM_SYSST ), - (int __user *)arg); -if (cpu_is_omap24xx ()) -return put_user (omap_prcm_get_reset_sources (), - (int __user *)arg); -return put_user (0 , (int __user *)arg); -case WDIOC_KEEPALIVE : -pm_runtime_get_sync (wdev->dev); -spin_lock (&wdt_lock); -omap_wdt_ping (wdev); -spin_unlock (&wdt_lock); -pm_runtime_put_sync (wdev->dev); -return 0 ; -case WDIOC_SETTIMEOUT : -if (get_user (new_margin, (int __user *)arg)) -return -EFAULT ; -omap_wdt_adjust_timeout (new_margin); - -pm_runtime_get_sync (wdev->dev); -spin_lock (&wdt_lock); -omap_wdt_disable (wdev); -omap_wdt_set_timeout (wdev); -omap_wdt_enable (wdev); - -omap_wdt_ping (wdev); -spin_unlock (&wdt_lock); -pm_runtime_put_sync (wdev->dev); -/* Fall */ -case WDIOC_GETTIMEOUT : -return put_user (timer_margin, (int __user *)arg); -default : -return -ENOTTY ; - } +pm_runtime_get_sync (omap_wdev->dev); +omap_wdt_disable (omap_wdev); +pm_runtime_put_sync (omap_wdev->dev); + +return 0 ; } -static const struct file_operations omap_wdt_fops = { +static const struct watchdog_ops omap_wdt_ops = { .owner =THIS_MODULE , - .write = omap_wdt_write, - .unlocked_ioctl = omap_wdt_ioctl, - .open = omap_wdt_open, - .release = omap_wdt_release, - .llseek = no_llseek, + .start = omap_wdt_start, + .stop = omap_wdt_stop, + .ping = omap_wdt_ping, + .set_timeout = omap_wdt_set_timeout, +}; + +static const struct watchdog_info omap_wdt_info = { + .options =WDIOF_SETTIMEOUT |WDIOF_MAGICCLOSE |WDIOF_KEEPALIVEPING | +WDIOF_CARDRESET , + .identity ="Omap Watchdog" , };static int __devinit omap_wdt_probe (struct platform_device *pdev) { +struct omap_wdt_drvdata *omap_drvdata; +struct watchdog_device *omap_wdev;struct resource *res, *mem; -struct omap_wdt_dev *wdev;int ret;/* reserve static register mappings */
@@ -286,68 +216,62 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) goto err_get_resource; } -if (omap_wdt_dev) { - ret = -EBUSY ; - goto err_busy; - } - mem =request_mem_region (res->start,resource_size (res), pdev->name);if (!mem) { ret = -EBUSY ; goto err_busy; } - wdev =kzalloc (sizeof (struct omap_wdt_dev ),GFP_KERNEL ); -if (!wdev) { + omap_drvdata =devm_kzalloc (&pdev->dev,sizeof (struct omap_wdt_drvdata ), +GFP_KERNEL ); +if (!omap_drvdata) { +dev_err (&pdev->dev,"Unable to allocate watchdog device\n" ); ret = -ENOMEM ; goto err_kzalloc; } - wdev->omap_wdt_users =0 ; - wdev->mem = mem; - wdev->dev = &pdev->dev; + omap_drvdata->dev = &pdev->dev; + omap_wdev = &omap_drvdata->wdt; + omap_wdev->info = &omap_wdt_info; + omap_wdev->ops = &omap_wdt_ops; + omap_wdev->timeout =TIMER_MARGIN_DEFAULT ; + omap_wdev->min_timeout =1 ; + omap_wdev->max_timeout =TIMER_MARGIN_MAX ; +#ifdef CONFIG_WATCHDOG_NOWAYOUT +watchdog_set_nowayout (omap_wdev, true); +#endif +watchdog_set_drvdata (omap_wdev, omap_drvdata); - wdev->base =ioremap (res->start,resource_size (res)); -if (!wdev->base) { + omap_drvdata->base =ioremap (res->start,resource_size (res)); +if (!omap_drvdata->base) { ret = -ENOMEM ; - goto err_ioremap; + goto err_kzalloc; } -platform_set_drvdata (pdev, wdev); - -pm_runtime_enable (wdev->dev); -pm_runtime_get_sync (wdev->dev); - -omap_wdt_disable (wdev); -omap_wdt_adjust_timeout (timer_margin); - - wdev->omap_wdt_miscdev.parent = &pdev->dev; - wdev->omap_wdt_miscdev.minor =WATCHDOG_MINOR ; - wdev->omap_wdt_miscdev.name ="watchdog" ; - wdev->omap_wdt_miscdev.fops = &omap_wdt_fops; - - ret =misc_register (&(wdev->omap_wdt_miscdev)); -if (ret) - goto err_misc; - -pr_info ("OMAP Watchdog Timer Rev 0x%02x: initial timeout %d sec\n" , -__raw_readl (wdev->base +OMAP_WATCHDOG_REV ) &0xFF , - timer_margin); - -pm_runtime_put_sync (wdev->dev); - - omap_wdt_dev = pdev; + ret =watchdog_register_device (&omap_drvdata->wdt); +if (ret <0 ) + goto err_register_wd; + +pm_runtime_enable (&pdev->dev); +pm_runtime_get_sync (&pdev->dev); +omap_wdt_disable (omap_drvdata); +pm_runtime_put_sync (&pdev->dev); +platform_set_drvdata (pdev, omap_drvdata); + +/* For omap16xx we just keep it original as-is */ +if (cpu_is_omap16xx ()) + omap_wdev->bootstatus =__raw_readw (ARM_SYSST ); +else + omap_wdev->bootstatus = (omap_prcm_get_reset_sources () &0x10 ) + >>OMAP3_PRM_RSTST_WD_BIT ; +pr_info ("OMAP WDTimer Rev 0x%02x: Initial timeout %dsec status= 0x%x\n" , +__raw_readl (omap_drvdata->base +OMAP_WATCHDOG_REV ) + &0xFF , timer_margin, omap_wdev->bootstatus);return 0 ; -err_misc: -pm_runtime_disable (wdev->dev); -platform_set_drvdata (pdev,NULL ); -iounmap (wdev->base); - -err_ioremap: - wdev->base =NULL ; -kfree (wdev); +err_register_wd: +iounmap (omap_drvdata->base); err_kzalloc:release_mem_region (res->start,resource_size (res));
@@ -358,34 +282,17 @@ err_get_resource:return ret; } -static void omap_wdt_shutdown (struct platform_device *pdev) -{ -struct omap_wdt_dev *wdev =platform_get_drvdata (pdev); - -if (wdev->omap_wdt_users) { -pm_runtime_get_sync (wdev->dev); -omap_wdt_disable (wdev); -pm_runtime_put_sync (wdev->dev); - } -} - static int __devexit omap_wdt_remove(struct platform_device *pdev) { -struct omap_wdt_dev *wdev =platform_get_drvdata (pdev); +struct omap_wdt_drvdata *omap_wdev =platform_get_drvdata (pdev);struct resource *res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); -pm_runtime_disable (wdev->dev); -if (!res) -return -ENOENT ; +pm_runtime_disable (&pdev->dev); -misc_deregister (&(wdev->omap_wdt_miscdev));release_mem_region (res->start,resource_size (res));platform_set_drvdata (pdev,NULL ); -iounmap (wdev->base); - -kfree (wdev); - omap_wdt_dev =NULL ; +iounmap (omap_wdev->base);return 0 ; }
@@ -400,12 +307,12 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev)static int omap_wdt_suspend (struct platform_device *pdev,pm_message_t state) { -struct omap_wdt_dev *wdev =platform_get_drvdata (pdev); +struct omap_wdt_drvdata *omap_wdev =platform_get_drvdata (pdev); -if (wdev->omap_wdt_users) { -pm_runtime_get_sync (wdev->dev); -omap_wdt_disable (wdev); -pm_runtime_put_sync (wdev->dev); +if (test_bit (WDOG_DEV_OPEN , &omap_wdev->wdt.status)) { +pm_runtime_get_sync (&pdev->dev); +omap_wdt_disable (omap_wdev); +pm_runtime_put_sync (&pdev->dev); }return 0 ;
@@ -413,13 +320,12 @@ static int omap_wdt_suspend(struct platform_device *pdev, pm_message_t state)static int omap_wdt_resume (struct platform_device *pdev) { -struct omap_wdt_dev *wdev =platform_get_drvdata (pdev); - -if (wdev->omap_wdt_users) { -pm_runtime_get_sync (wdev->dev); -omap_wdt_enable (wdev); -omap_wdt_ping (wdev); -pm_runtime_put_sync (wdev->dev); +struct omap_wdt_drvdata *omap_wdev =platform_get_drvdata (pdev); +if (test_bit (WDOG_DEV_OPEN , &omap_wdev->wdt.status)) { +pm_runtime_get_sync (&pdev->dev); +omap_wdt_enable (omap_wdev); +omap_wdt_ping (&omap_wdev->wdt); +pm_runtime_put_sync (&pdev->dev); }return 0 ;
@@ -433,7 +339,6 @@ static int omap_wdt_resume(struct platform_device *pdev)static struct platform_driver omap_wdt_driver = { .probe = omap_wdt_probe, .remove =__devexit_p (omap_wdt_remove), - .shutdown = omap_wdt_shutdown, .suspend = omap_wdt_suspend, .resume = omap_wdt_resume, .driver = {
@@ -446,5 +351,4 @@ module_platform_driver(omap_wdt_driver);MODULE_AUTHOR ("George G. Davis" );MODULE_LICENSE ("GPL" ); -MODULE_ALIAS_MISCDEV (WATCHDOG_MINOR );MODULE_ALIAS ("platform:omap_wdt" );
drivers/watchdog/omap_wdt.h +5 -0
@@ -51,4 +51,9 @@#define PTV 0/* prescale */ #define GET_WLDR_VAL (secs) (0xffffffff - ((secs) * (32768/(1<<PTV))) + 1) +/* MPU_WD_RST bit in PRM_RSTST show Omap WDTimer reset event. +* 0x0 = 0x0 : No watchdog reset. +* 0x1 = 0x1 : watchdog reset has occurred. */ +#define OMAP3_PRM_RSTST_WD_BIT 4 +#endif /* _OMAP_WATCHDOG_H */
Signature · 1 line
1.7.5.4
PATCH v2 2/3 Watchdog: Omap: select watchdog core for framework change
In reply to Zumeng ChenSince the current watchdog framework depends on the watchdog core so select it in Kconfig.
--- drivers/watchdog/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/watchdog/Kconfig +1 -0
@@ -232,6 +232,7 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS + select WATCHDOG_CORE help Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
Signature · 1 line
1.7.5.4
PATCH v2 3/3 Watchdog: Omap: get the bootstatus for OMAP2Plus
In reply to Zumeng ChenThe offset of WKUP_MOD is not right for the PRM_RSTST of OMAP3. So here put the right one to match to the actual physical addr 0x48307258, which defined in PRCM Registers section named as Global_Reg_PRM.
And there is a MPU_WD_RST bit in PRM_RSTST(0x48307258) holding the signal from omap-wdt reboot, so that we can return WDIOF_CARDRESET if the board wakes up from omap-wdt reboot for WDIOC_GETBOOTSTATUS ioctl.
--- arch/arm/mach-omap2/prcm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/prcm.c +4 -1
@@ -49,8 +49,11 @@ void __iomem *prcm_mpu_base;u32 omap_prcm_get_reset_sources (void ) {/* XXX This presumably needs modification for 34XX */ -if (cpu_is_omap24xx () ||cpu_is_omap34xx ()) +if (cpu_is_omap24xx ())return omap2_prm_read_mod_reg (WKUP_MOD ,OMAP2_RM_RSTST ) &0x7f ; +if (cpu_is_omap34xx ()) +return omap2_prm_read_mod_reg (OMAP3430_GR_MOD ,OMAP2_RM_RSTST ) & +0x7f ;if (cpu_is_omap44xx ())return omap2_prm_read_mod_reg (WKUP_MOD ,OMAP4_RM_RSTST ) &0x7f ;
Signature · 1 line
1.7.5.4
v2 cover Watchdog: OMAP: bootstatus fix for omap3 and changes for the current watchdog framework
In reply to Zumeng Chen? 2012?07?09? 15:35, Zumeng Chen ??:
Quoted 9 lines
Hello,
The following patches based on the 3.5-rc6 from Wim, which focus on:
1 ) bootstatus fix for omap3,
2 ) omap-wdt framework update cater for the current framework
as Shubhrajyoti comments mentioned.
I compiled a test case from the following website,
http://www.lpclinux.com/Blogs/Testing_LPC313x_Linux_Watchdog_Driver
It works well.
root at ti-omap3:/tmp# ./a.out -h
Usage: ./a.out [options]
-h --help Display this usage information.
-d --dev <device_file> Use <device_file> as watchdog device file. The default device file is '/dev/watchdog'
-i --interval <interval> Change the watchdog interval time root at ti-omap3:/tmp# ./a.out -i 40;
Set watchdog interval to 40
Current watchdog interval is 40
Last boot is caused by : Watchdog
Use:
<w> to kick through writing over device file
<i> to kick through IOCTL
<x> to exit the program
x
Goodbye !
watchdog: Omap Watchdog: nowayout prevents watchdog to be stopped!
watchdog: Omap Watchdog: watchdog did not stop!
root at ti-omap3:/tmp# for i in seq 1 30; do echo $i; sleep 1;done 1
2
[snip]
I built NOWAYOUT in driver, so it doesn't stop, still going until the following
information:
Texas Instruments X-Loader 1.42
Starting OS Bootloader...
No OOB scheme defined for oobsize 0
OneNAND: 0 kB
256 MiB
Regards,
Zumeng
Quoted 14 lines
Regards,
Zumeng Chen (3):
Watchdog: Omap: Changes for the new watchdog framework
Watchdog: Omap: select watchdog core for framework change
Watchdog: Omap: get the bootstatus for OMAP2Plusarch/arm/mach-omap2/prcm.c | 5 +- drivers/watchdog/Kconfig | 1 + drivers/watchdog/omap_wdt.c | 342 ++++++++++++++++--------------------------- drivers/watchdog/omap_wdt.h | 5 + 4 files changed, 133 insertions(+), 220 deletions(-)
v2 cover Watchdog: OMAP: bootstatus fix for omap3 and changes for the current watchdog framework
The same case works well on am335xevm but with a new patch in mach-omap2/prcm.c
I'll send it later.
root at ti-omap3:~# uname -a
Linux ti-omap3 3.4.3-00635-g82d1d26-dirty #32 Wed Jul 11 16:02:12 CST 2012 armv7l GNU/Linux
root at ti-omap3:~# dmesg|grep WDT
[ 1.921173] omap_wdt: OMAP WDTimer Rev 0x01: Initial timeout 0sec
status= 0x1
root at ti-omap3:~# ./a.out -i 20; for i in seq 1 20; do echo $i ; sleep 1;done
Set watchdog interval to 20
Current watchdog interval is 20
Last boot is caused by : Watchdog
Use:
<w> to kick through writing over device file
<i> to kick through IOCTL
<x> to exit the program
x
1
2
[snip]
U-Boot SPL 2011.09 (Feb 09 2012 - 15:38:59) Texas Instruments Revision detection unimplemented
U-Boot 2011.09 (Feb 09 2012 - 15:11:31)
I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
Found a daughter card connected
NAND: HW ECC Hamming Code selected
256 MiB
MMC: OMAP SD/MMC: 0
Net: cpsw
Hit any key to stop autoboot: 0
U-Boot#
Regards,
Zumeng
? 2012?07?10? 12:17, Zumeng Chen ??:
Quoted 68 lines
? 2012?07?09? 15:35, Zumeng Chen ??:
Quoted 9 lines
Hello,
The following patches based on the 3.5-rc6 from Wim, which focus on:
1 ) bootstatus fix for omap3,
2 ) omap-wdt framework update cater for the current framework
as Shubhrajyoti comments mentioned.I compiled a test case from the following website,
http://www.lpclinux.com/Blogs/Testing_LPC313x_Linux_Watchdog_DriverIt works well.
root at ti-omap3:/tmp# ./a.out -h
Usage: ./a.out [options](quoted diff) +0
-2-h --help Display this usage information. -d --dev <device_file> Use <device_file> as watchdog device file.The default device file is '
/dev/watchdog'
-i --interval <interval> Change the watchdog interval time root at ti-omap3:/tmp# ./a.out -i 40;
Set watchdog interval to 40
Current watchdog interval is 40
Last boot is caused by : Watchdog
Use:
<w> to kick through writing over device file
<i> to kick through IOCTL
<x> to exit the program
x
Goodbye !
watchdog: Omap Watchdog: nowayout prevents watchdog to be stopped!
watchdog: Omap Watchdog: watchdog did not stop!
root at ti-omap3:/tmp# for i inseq 1 30; do echo $i; sleep 1;done 1
2[snip]
I built NOWAYOUT in driver, so it doesn't stop, still going until the following
information:Texas Instruments X-Loader 1.42
Starting OS Bootloader...
No OOB scheme defined for oobsize 0
OneNAND: 0 kB
256 MiBRegards,
ZumengQuoted 7 lines
Regards,
Zumeng Chen (3):
Watchdog: Omap: Changes for the new watchdog framework
Watchdog: Omap: select watchdog core for framework change
Watchdog: Omap: get the bootstatus for OMAP2PlusQuoted 6 lines
arch/arm/mach-omap2/prcm.c | 5 +- drivers/watchdog/Kconfig | 1 + drivers/watchdog/omap_wdt.c | 342 ++++++++++++++++--------------------------- drivers/watchdog/omap_wdt.h | 5 + 4 files changed, 133 insertions(+), 220 deletions(-)--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html