Skip to contentSkip to conversation

Pull request

U-Boot Applied Heiko Schocher 2 participants 2 messages Jul 11, 2012 – Jul 12, 2012

lore
Share & tools
lore
#0 lore raw

Hello Wolfgang,

Sorry for the late pull request, but it seems my Pull request Email got lost ... Sorry. A "MAKEALL arm" with ELDK-5.2 compiled fine.

The following changes since commit 211e47549b668c7cdd8658c0413a272f0d0495d4:

Prepare v2012.07-rc1 (2012-07-10 09:21:12 +0200)

are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master

Fabio Estevam (1):
mx28evk: Add I2C support

Torsten Fleischer (1):
mxs-i2c: Fix internal address byte order

Troy Kisky (3):
mxc_i2c: specify i2c base address in config file
mx6qsabrelite: add i2c support
mxc_i2c: remove setting speed at each start

  arch/arm/include/asm/arch-mx31/imx-regs.h     |    7 +++++
  arch/arm/include/asm/arch-mx35/imx-regs.h     |    2 +-
  board/freescale/mx28evk/iomux.c               |    3 ++
  board/freescale/mx6qsabrelite/mx6qsabrelite.c |   11 +++++++++
  drivers/i2c/mxc_i2c.c                         |   31 +++---------------------
  drivers/i2c/mxs_i2c.c                         |    2 +-
  include/configs/flea3.h                       |    2 +-
  include/configs/imx31_phycore.h               |    3 +-
  include/configs/mx28evk.h                     |    8 ++++++
  include/configs/mx35pdk.h                     |    2 +-
  include/configs/mx53ard.h                     |    2 +-
  include/configs/mx53evk.h                     |    2 +-
  include/configs/mx53loco.h                    |    2 +-
  include/configs/mx53smd.h                     |    2 +-
  include/configs/mx6qsabrelite.h               |    8 ++++++
  15 files changed, 51 insertions(+), 36 deletions(-)

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

Dear Heiko Schocher,

Quoted 23 lines · In message <[email protected]> you wrote:

Hello Wolfgang,

Sorry for the late pull request, but it seems my Pull request Email got lost ... Sorry. A "MAKEALL arm" with ELDK-5.2 compiled fine.

The following changes since commit 211e47549b668c7cdd8658c0413a272f0d0495d4:

   Prepare v2012.07-rc1 (2012-07-10 09:21:12 +0200)

are available in the git repository at:

   git://git.denx.de/u-boot-i2c.git master

Fabio Estevam (1):
mx28evk: Add I2C support

Torsten Fleischer (1):
mxs-i2c: Fix internal address byte order

Troy Kisky (3):
mxc_i2c: specify i2c base address in config file
mx6qsabrelite: add i2c support
mxc_i2c: remove setting speed at each start

Quoted 16 lines
  arch/arm/include/asm/arch-mx31/imx-regs.h     |    7 +++++
  arch/arm/include/asm/arch-mx35/imx-regs.h     |    2 +-
  board/freescale/mx28evk/iomux.c               |    3 ++
  board/freescale/mx6qsabrelite/mx6qsabrelite.c |   11 +++++++++
  drivers/i2c/mxc_i2c.c                         |   31 +++---------------------
  drivers/i2c/mxs_i2c.c                         |    2 +-
  include/configs/flea3.h                       |    2 +-
  include/configs/imx31_phycore.h               |    3 +-
  include/configs/mx28evk.h                     |    8 ++++++
  include/configs/mx35pdk.h                     |    2 +-
  include/configs/mx53ard.h                     |    2 +-
  include/configs/mx53evk.h                     |    2 +-
  include/configs/mx53loco.h                    |    2 +-
  include/configs/mx53smd.h                     |    2 +-
  include/configs/mx6qsabrelite.h               |    8 ++++++
  15 files changed, 51 insertions(+), 36 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...and the fully armed nuclear warheads, are, of  course,  merely  a
courtesy detail."