Skip to contentSkip to conversation

tc-bfifo: man: Add parameter value range.

PATCH Applied Li Wei 2 participants 2 messages Jul 13, 2012

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Li Wei

author
#0 lore raw

PATCH 1/1 tc-bfifo: man: Add parameter value range.

Add value range for 'limit' parameter.

---
 man/man8/tc-bfifo.8 |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
man/man8/tc-bfifo.8 +4 -0
index 8dda4bb..417e45c 100644
@@ -40,8 +40,12 @@ to the interface txqueuelen, as specified with
 .BR ifconfig (8)
 or
 .BR ip (8).
+The range for this parameter is [0, UINT32_MAX].
 
 For bfifo, it defaults to the txqueuelen multiplied by the interface MTU.
+The range for this parameter is [0, UINT32_MAX] bytes.
+
+Note: The link layer header was considered when couting packets length.
 
 .SH OUTPUT
 The output of
Signature · 1 line
1.7.1
Applied
#1 lore raw
Quoted 11 lines · On Fri, 13 Jul 2012 15:08:00 +0800 Li Wei <[email protected]> wrote:

Add value range for 'limit' parameter.

---
 man/man8/tc-bfifo.8 |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
man/man8/tc-bfifo.8 +0 -0
index 8dda4bb..417e45c 100644

man/man8/tc-bfifo.8 to the interface txqueuelen, as specified with · line 49

Quoted 10 lines
man/man8/tc-bfifo.8 +4 -0
@@ -40,8 +40,12 @@ to the interface txqueuelen, as specified with
 .BR ifconfig (8)
 or
 .BR ip (8).
+The range for this parameter is [0, UINT32_MAX].
 
 For bfifo, it defaults to the txqueuelen multiplied by the interface MTU.
+The range for this parameter is [0, UINT32_MAX] bytes.
+
+Note: The link layer header was considered when couting packets length.

Applied. Fixed spelling of "couting"