Skip to contentSkip to conversation

ath10k-firmware: QCA4019 hw1.0: Add BDF for Linksys EA8300 [1/2]

PATCH In review Christian Lamparter 2 participants 2 messages Jul 1, 2022 – Mar 17, 2023 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ath10k-firmware: QCA4019 hw1.0: Add BDF for Linksys EA8300 [1/2]

From: Jeff Kletsky <[email protected]>

This is a QCA4019-based device with a PCI-attached QCA9888 supplying a third radio on 5 GHz. The OEM's firmware and source suggest that this device is "based on Qualcomm AP DK07.1-c1"

Linksys ships four market-specific variants of this device, notated as -AH, -EU, (no suffix), and -CA. They supply four sets of pre-cal board files in their firmware, AH, EU, FCC, and IC. The corresponding files differ from each other, and appear to provide different parameters in the different regions. The OEM firmware copies the appropriate set of files into place based on examining the SKU of the device at boot.

These board files may be obtained from extraction of the OEM firmware Ver. 1.1.4.191539, Latest Date: 11/8/2018, 49.0 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.4.191539_prod.img
Ver. 1.1.3.184925, Latest Date: 11/15/2017, 47.4 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.3.184925_prod.img
and/or from a running device. There does not appear to be a difference in the board files between the two firmware versions.

DTS for the EA8300 under OpenWrt expects that the variant be encoded as, for example, linksys-ea8300-fcc, with the lower-cased suffix indicating the OEM's regional code, or -fcc.

The files selected and their original names and organization include:

         435d236890521515feffc834218ca594  OEM/IPQ4019/IC/boardData_1_0_IPQ4019_DK04_5G.bin
         e8858ab9259f7d4372040da1c592d1cc  OEM/IPQ4019/IC/boardData_1_0_IPQ4019_DK04_2G.bin
         d6d7ed00db985b4d8c48ccc3fe10fa87  OEM/IPQ4019/EU/boardData_1_0_IPQ4019_DK04_5G.bin
         5cef8208a0345c1469494e44e1f370f1  OEM/IPQ4019/EU/boardData_1_0_IPQ4019_DK04_2G.bin
         0e820f5946b5773ad9f4a74809c05b79  OEM/IPQ4019/FCC/boardData_1_0_IPQ4019_DK04_5G.bin
         057ed5528e360197c2239796710cb61c  OEM/IPQ4019/FCC/boardData_1_0_IPQ4019_DK04_2G.bin
         0171919a4576199ae88e8831f72c03fe  OEM/IPQ4019/AH/boardData_1_0_IPQ4019_DK04_5G.bin
         a8e23769dc98da97b6c70a4f601ffca8  OEM/IPQ4019/AH/boardData_1_0_IPQ4019_DK04_2G.bin

The files were renamed as follows:

         for JD in AH EU FCC IC ; do
             jd=$(echo "$JD" | tr 'A-Z' 'a-z')
             cp -vp OEM/IPQ4019/${JD}/boardData_1_0_IPQ4019_DK04_2G.bin \
	    ${dest}/bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-${jd}
             cp -vp OEM/IPQ4019/${JD}/boardData_1_0_IPQ4019_DK04_5G.bin \
	    ${dest}/bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-${jd}
         done

Renamed board files are individually attached to the IPQ4019 messages. dmesg excerpts are from the device running OpenWrt with locally crafted, aggregate board files.

- QCA4019 hw1.0

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ah
    md5sum: a8e23769dc98da97b6c70a4f601ffca8

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-fcc
    md5sum: 057ed5528e360197c2239796710cb61c

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-eu
    md5sum: 5cef8208a0345c1469494e44e1f370f1

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ic
    md5sum: e8858ab9259f7d4372040da1c592d1cc


    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-eu
    md5sum: d6d7ed00db985b4d8c48ccc3fe10fa87

    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ic
    md5sum: 435d236890521515feffc834218ca594

    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-fcc
    md5sum: 0e820f5946b5773ad9f4a74809c05b79

    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ah
    md5sum: 0171919a4576199ae88e8831f72c03fe

--
v2: added .bin file extension

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 71 lines · Christian Lamparter

From: Jeff Kletsky <[email protected]>

This is a QCA4019-based device with a PCI-attached QCA9888 supplying a third radio on 5 GHz. The OEM's firmware and source suggest that this device is "based on Qualcomm AP DK07.1-c1"

Linksys ships four market-specific variants of this device, notated as -AH, -EU, (no suffix), and -CA. They supply four sets of pre-cal board files in their firmware, AH, EU, FCC, and IC. The corresponding files differ from each other, and appear to provide different parameters in the different regions. The OEM firmware copies the appropriate set of files into place based on examining the SKU of the device at boot.

These board files may be obtained from extraction of the OEM firmware Ver. 1.1.4.191539, Latest Date: 11/8/2018, 49.0 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.4.191539_prod.img
Ver. 1.1.3.184925, Latest Date: 11/15/2017, 47.4 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.3.184925_prod.img
and/or from a running device. There does not appear to be a difference in the board files between the two firmware versions.

DTS for the EA8300 under OpenWrt expects that the variant be encoded as, for example, linksys-ea8300-fcc, with the lower-cased suffix indicating the OEM's regional code, or -fcc.

The files selected and their original names and organization include:

         435d236890521515feffc834218ca594  OEM/IPQ4019/IC/boardData_1_0_IPQ4019_DK04_5G.bin
         e8858ab9259f7d4372040da1c592d1cc  OEM/IPQ4019/IC/boardData_1_0_IPQ4019_DK04_2G.bin
         d6d7ed00db985b4d8c48ccc3fe10fa87  OEM/IPQ4019/EU/boardData_1_0_IPQ4019_DK04_5G.bin
         5cef8208a0345c1469494e44e1f370f1  OEM/IPQ4019/EU/boardData_1_0_IPQ4019_DK04_2G.bin
         0e820f5946b5773ad9f4a74809c05b79  OEM/IPQ4019/FCC/boardData_1_0_IPQ4019_DK04_5G.bin
         057ed5528e360197c2239796710cb61c  OEM/IPQ4019/FCC/boardData_1_0_IPQ4019_DK04_2G.bin
         0171919a4576199ae88e8831f72c03fe  OEM/IPQ4019/AH/boardData_1_0_IPQ4019_DK04_5G.bin
         a8e23769dc98da97b6c70a4f601ffca8  OEM/IPQ4019/AH/boardData_1_0_IPQ4019_DK04_2G.bin

The files were renamed as follows:

         for JD in AH EU FCC IC ; do
             jd=$(echo "$JD" | tr 'A-Z' 'a-z')
             cp -vp OEM/IPQ4019/${JD}/boardData_1_0_IPQ4019_DK04_2G.bin \
	    ${dest}/bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-${jd}
             cp -vp OEM/IPQ4019/${JD}/boardData_1_0_IPQ4019_DK04_5G.bin \
	    ${dest}/bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-${jd}
         done

Renamed board files are individually attached to the IPQ4019 messages. dmesg excerpts are from the device running OpenWrt with locally crafted, aggregate board files.

- QCA4019 hw1.0

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ah
    md5sum: a8e23769dc98da97b6c70a4f601ffca8

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-fcc
    md5sum: 057ed5528e360197c2239796710cb61c

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-eu
    md5sum: 5cef8208a0345c1469494e44e1f370f1

    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ic
    md5sum: e8858ab9259f7d4372040da1c592d1cc


    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-eu
    md5sum: d6d7ed00db985b4d8c48ccc3fe10fa87
Quoted 8 lines
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ic
    md5sum: 435d236890521515feffc834218ca594

    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-fcc
    md5sum: 0e820f5946b5773ad9f4a74809c05b79

    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ah
    md5sum: 0171919a4576199ae88e8831f72c03fe

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ah bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-eu bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-fcc bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-ea8300-ic bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ah bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-eu bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-fcc bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-ea8300-ic

Changed:

Deleted:

8 board image(s) added, 0 changed, 0 deleted, 114 in total

https://github.com/kvalo/ath10k-firmware/commit/0c3378faf4622bea1d328e6e004f3972777f5ac2

Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k