security/integrity: Include __func__ in messages for easier debug
Subsystems (4)
PATCH 1/1 security/integrity: Include __func__ in messages for easier debug
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed.
Couldn't get size: 0x800000000000000e
Change messages to include function information.
--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)
security/integrity/platform_certs/load_powerpc.c +8 -6
@@ -25,7 +25,7 @@ static __init void *get_cert_list(u8 *key, unsigned long keylen, uint64_t *size) rc = secvar_ops->get (key, keylen,NULL , size);if (rc) { -pr_err ("Couldn't get size: %d\n" , rc); +pr_err ("%s: Couldn't get size: %d\n" , __func__, rc);return NULL ; }
@@ -36,7 +36,7 @@ static __init void *get_cert_list(u8 *key, unsigned long keylen, uint64_t *size) rc = secvar_ops->get (key, keylen, db, size);if (rc) {kfree (db); -pr_err ("Error reading %s var: %d\n" , key, rc); +pr_err ("%s: Error reading %s var: %d\n" , __func__, key, rc);return NULL ; }
@@ -69,23 +69,25 @@ static int __init load_powerpc_certs(void)*/ db =get_cert_list ("db" ,3 , &dbsize);if (!db) { -pr_err ("Couldn't get db list from firmware\n" ); +pr_err ("%s: Couldn't get db list from firmware\n" , __func__); }else { rc =parse_efi_signature_list ("powerpc:db" , db, dbsize, get_handler_for_db);if (rc) -pr_err ("Couldn't parse db signatures: %d\n" , rc); +pr_err ("%s: Couldn't parse db signatures: %d\n" , + __func__, rc);kfree (db); } dbx =get_cert_list ("dbx" ,4 , &dbxsize);if (!dbx) { -pr_info ("Couldn't get dbx list from firmware\n" ); +pr_info ("%s: Couldn't get dbx list from firmware\n" , __func__); }else { rc =parse_efi_signature_list ("powerpc:dbx" , dbx, dbxsize, get_handler_for_dbx);if (rc) -pr_err ("Couldn't parse dbx signatures: %d\n" , rc); +pr_err ("%s: Couldn't parse dbx signatures: %d\n" , + __func__, rc);kfree (dbx); }
security/integrity/platform_certs/load_uefi.c +10 -7
@@ -44,7 +44,7 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, status = efi.get_variable (name, guid,NULL , &lsize, &tmpdb);if (status !=EFI_BUFFER_TOO_SMALL ) { -pr_err ("Couldn't get size: 0x%lx\n" , status); +pr_err ("%s: Couldn't get size: 0x%lx\n" , __func__, status);return NULL ; }
@@ -55,7 +55,7 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid, status = efi.get_variable (name, guid,NULL , &lsize, db);if (status !=EFI_SUCCESS ) {kfree (db); -pr_err ("Error reading db var: 0x%lx\n" , status); +pr_err ("%s: Error reading db var: 0x%lx\n" , __func__, status);return NULL ; }
@@ -85,13 +85,14 @@ static int __init load_uefi_certs(void)if (!uefi_check_ignore_db ()) { db =get_cert_list (L"db" , &secure_var, &dbsize);if (!db) { -pr_err ("MODSIGN: Couldn't get UEFI db list\n" ); +pr_err ("%s: MODSIGN: Couldn't get UEFI db list\n" , + __func__); }else { rc =parse_efi_signature_list ("UEFI:db" , db, dbsize, get_handler_for_db);if (rc) -pr_err ("Couldn't parse db signatures: %d\n" , - rc); +pr_err ("%s: Couldn't parse db signatures: %d\n" , + __func__, rc);kfree (db); } }
@@ -103,7 +104,8 @@ static int __init load_uefi_certs(void) rc =parse_efi_signature_list ("UEFI:MokListRT" , mok, moksize, get_handler_for_db);if (rc) -pr_err ("Couldn't parse MokListRT signatures: %d\n" , rc); +pr_err ("%s: Couldn't parse MokListRT signatures: %d\n" , + __func__, rc);kfree (mok); }
@@ -115,7 +117,8 @@ static int __init load_uefi_certs(void) dbx, dbxsize, get_handler_for_dbx);if (rc) -pr_err ("Couldn't parse dbx signatures: %d\n" , rc); +pr_err ("%s: Couldn't parse dbx signatures: %d\n" , + __func__, rc);kfree (dbx); }
Signature · 1 line
2.20.1
security/integrity/platform_certs/load_powerpc.c
Quoted 11 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)security/integrity/platform_certs/load_powerpc.c +0
-0
perhaps instead add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt so all the pr_<level> logging is more specific.
This would prefix all pr_<level> output with "integrity: "
3integrity: Couldn't get size: 0x%lx 3integrity: Error reading db var: 0x%lx 3integrity: MODSIGN: Couldn't get UEFI db list 3integrity: Couldn't parse db signatures: %d 6integrity: Couldn't get UEFI MokListRT 3integrity: Couldn't parse MokListRT signatures: %d 6integrity: Couldn't get UEFI dbx list 3integrity: Couldn't parse dbx signatures: %d
5integrity: Platform Keyring initialized 6integrity: Error adding keys to platform keyring %s
--- security/integrity/platform_certs/load_powerpc.c | 3 +++ security/integrity/platform_certs/load_uefi.c | 2 ++ security/integrity/platform_certs/platform_keyring.c | 2 ++ 3 files changed, 7 insertions(+)
security/integrity/platform_certs/load_powerpc.c +3 -0
@@ -5,6 +5,9 @@* * - loads keys and hashes stored and controlled by the firmware. */ + +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/kernel.h> #include <linux/sched.h> #include <linux/cred.h>
security/integrity/platform_certs/load_uefi.c +2 -0
@@ -1,5 +1,7 @@// SPDX-License-Identifier: GPL-2.0 +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/kernel.h> #include <linux/sched.h> #include <linux/cred.h>
security/integrity/platform_certs/platform_keyring.c +2 -0
@@ -6,6 +6,8 @@* Author(s): Nayna Jain <[email protected]> */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/export.h> #include <linux/kernel.h> #include <linux/sched.h>
Mimi Zohar
maintainerQuoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Agreed. Joe, could you post a patch with a proper patch description for this?
thanks,
Mimi
Quoted 12 lines · Mimi Zohar
Quoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)
Quoted 7 lines
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Joe! Sorry for the delay in getting back to you.
Quoted 3 lines
Agreed. Joe, could you post a patch with a proper patch description for this?
I have been looking into this a bit more and there is an opportunity here to add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt to integrity.h and get rid of duplicate defines.
thanks,
-- Shuah
Quoted 22 lines · Shuah Khan
Quoted 12 lines · Mimi Zohar
Quoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)Quoted 6 lines
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Joe! Sorry for the delay in getting back to you.
Quoted 7 lines
Quoted 3 lines
Agreed. Joe, could you post a patch with a proper patch description for this?
I have been looking into this a bit more and there is an opportunity here to add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt tointegrity.hand get rid of duplicate defines.
That might work but:
$ git grep --name-only 'integrity\.h' security | xargs grep pr_fmt security/integrity/digsig.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/digsig_asymmetric.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/evm/evm_main.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/security.c:#define pr_fmt(fmt) "LSM: " fmt
Here security.c already uses "LSM: "
Does anyone care about the LSM: prefix?
Quoted 39 lines · Joe Perches
Quoted 22 lines · Shuah Khan
Quoted 12 lines · Mimi Zohar
Quoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)Quoted 6 lines
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Joe! Sorry for the delay in getting back to you.
Quoted 7 lines
Quoted 3 lines
Agreed. Joe, could you post a patch with a proper patch description for this?
I have been looking into this a bit more and there is an opportunity here to add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt tointegrity.hand get rid of duplicate defines.That might work but:
$ git grep --name-only 'integrity\.h' security | xargs grep pr_fmt security/integrity/digsig.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/digsig_asymmetric.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/evm/evm_main.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/security.c:#define pr_fmt(fmt) "LSM: " fmt
Quoted 5 lines
Here
security.calready uses "LSM: "Does anyone care about the LSM: prefix?
What I have in mind is replace the ones under security/integrity/ adding the define to integrity.h is under security/integrity.
I would leave the security/security.c:#define pr_fmt(fmt) "LSM: " fmt alone and just replace the ones under security/integrity/ in which case KBUILD_MODNAME will show integrity as the module.
thanks,
-- Shuah
Quoted 35 lines · Joe Perches
Quoted 18 lines · Shuah Khan
Quoted 12 lines · Mimi Zohar
Quoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)Quoted 5 lines
Quoted 5 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Quoted 8 lines
Joe! Sorry for the delay in getting back to you.
Quoted 3 lines
Agreed. Joe, could you post a patch with a proper patch description for this?
I have been looking into this a bit more and there is an opportunity here to add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt tointegrity.hand get rid of duplicate defines.That might work but:
$ git grep --name-only 'integrity\.h' security | xargs grep pr_fmt security/integrity/digsig.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/digsig_asymmetric.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/evm/evm_main.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/security.c:#define pr_fmt(fmt) "LSM: " fmt
Quoted 3 lines
Here
security.calready uses "LSM: "Does anyone care about the LSM: prefix?
Yes.
Quoted 36 lines · Casey Schaufler
Quoted 35 lines · Joe Perches
Quoted 18 lines · Shuah Khan
Quoted 12 lines · Mimi Zohar
Quoted 11 lines · Joe Perches
Quoted 10 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)Quoted 5 lines
Quoted 5 lines
security/integrity/platform_certs/load_powerpc.c
Quoted 1 line
security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
Quoted 8 lines
Joe! Sorry for the delay in getting back to you.
Quoted 3 lines
Agreed. Joe, could you post a patch with a proper patch description for this?
I have been looking into this a bit more and there is an opportunity here to add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt tointegrity.hand get rid of duplicate defines.That might work but:
$ git grep --name-only 'integrity\.h' security | xargs grep pr_fmt security/integrity/digsig.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/digsig_asymmetric.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/integrity/evm/evm_main.c:#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt security/security.c:#define pr_fmt(fmt) "LSM: " fmt
Quoted 5 lines
Quoted 3 lines
Here
security.calready uses "LSM: "Does anyone care about the LSM: prefix?
Yes.
No worries. My mistake it wouldn't change.
It was a bad grep as the integrity.h in security.c is #included from the linux/include path and not the integrity subdirectory.
Quoted 40 lines · Joe Perches
security/integrity/platform_certs/load_powerpc.c
Quoted 11 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
3integrity: Couldn't get size: 0x%lx 3integrity: Error reading db var: 0x%lx 3integrity: MODSIGN: Couldn't get UEFI db list 3integrity: Couldn't parse db signatures: %d 6integrity: Couldn't get UEFI MokListRT 3integrity: Couldn't parse MokListRT signatures: %d 6integrity: Couldn't get UEFI dbx list 3integrity: Couldn't parse dbx signatures: %d
5integrity: Platform Keyring initialized 6integrity: Error adding keys to platform keyring %s
--- security/integrity/platform_certs/load_powerpc.c | 3 +++ security/integrity/platform_certs/load_uefi.c | 2 ++ security/integrity/platform_certs/platform_keyring.c | 2 ++ 3 files changed, 7 insertions(+)security/integrity/platform_certs/load_powerpc.c +0
-0
security/integrity/platform_certs/load_powerpc.c line 10
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c +3
-0@@ -5,6 +5,9 @@* * - loads keys and hashes stored and controlled by the firmware. */ + +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +
Looks good. How about slight addition in it as below:
#define pr_fmt(fmt) KBUILD_MODNAME ": load_powerpc: " fmt
security/integrity/platform_certs/load_uefi.c line 3
Quoted 11 lines
security/integrity/platform_certs/load_powerpc.c +0
-0#include <linux/kernel.h> #include <linux/sched.h> #include <linux/cred.h> security/integrity/platform_certs/load_uefi.c +1
-0@@ -1,5 +1,7 @@// SPDX-License-Identifier: GPL-2.0 +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt
Similarly...
#define pr_fmt(fmt) KBUILD_MODNAME ": load_uefi: " fmt
security/integrity/platform_certs/platform_keyring.c line 9
Quoted 13 lines
security/integrity/platform_certs/load_uefi.c +1
-0+#include <linux/kernel.h> #include <linux/sched.h> #include <linux/cred.h> security/integrity/platform_certs/platform_keyring.c +1
-0@@ -6,6 +6,8 @@* Author(s): Nayna Jain <[email protected]> */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt
Same here...
#define pr_fmt(fmt) KBUILD_MODNAME ": platform_keyring: " fmt
Thanks & Regards,
- Nayna
Quoted 50 lines · Nayna
Quoted 40 lines · Joe Perches
security/integrity/platform_certs/load_powerpc.c
Quoted 11 lines · Shuah Khan
Change messages to messages to make it easier to debug. The following error message isn't informative enough to figure out what failed. Change messages to include function information.
Signed-off-by Shuah Khan <[email protected]>--- .../integrity/platform_certs/load_powerpc.c | 14 ++++++++------ security/integrity/platform_certs/load_uefi.c | 17 ++++++++++------- 2 files changed, 18 insertions(+), 13 deletions(-)security/integrity/platform_certs/load_powerpc.c +0
-0perhaps instead add #define
pr_fmt(fmt)KBUILD_MODNAME": " fmt so all the pr_<level> logging is more specific.This would prefix all pr_<level> output with "integrity: "
3integrity: Couldn't get size: 0x%lx 3integrity: Error reading db var: 0x%lx 3integrity: MODSIGN: Couldn't get UEFI db list 3integrity: Couldn't parse db signatures: %d 6integrity: Couldn't get UEFI MokListRT 3integrity: Couldn't parse MokListRT signatures: %d 6integrity: Couldn't get UEFI dbx list 3integrity: Couldn't parse dbx signatures: %d
5integrity: Platform Keyring initialized 6integrity: Error adding keys to platform keyring %s
--- security/integrity/platform_certs/load_powerpc.c | 3 +++ security/integrity/platform_certs/load_uefi.c | 2 ++ security/integrity/platform_certs/platform_keyring.c | 2 ++ 3 files changed, 7 insertions(+)security/integrity/platform_certs/load_powerpc.c +0
-0security/integrity/platform_certs/load_powerpc.c line 10
Quoted 6 lines
security/integrity/platform_certs/load_powerpc.c +3
-0@@ -5,6 +5,9 @@* * - loads keys and hashes stored and controlled by the firmware. */ + +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +Looks good. How about slight addition in it as below:
Quoted 1 line
#define
pr_fmt(fmt)KBUILD_MODNAME":load_powerpc: " fmt
Perhaps another way to do that is to use:
--- security/integrity/integrity.h | 6 ++++++ 1 file changed, 6 insertions(+)
(quoted diff) +0 -0
b/security/integrity/integrity.h
index 543d277..b78469 100644
security/integrity/integrity.h +6 -0
@@ -6,6 +6,12 @@* Mimi Zohar <[email protected]> */ +#ifdef pr_fmt +#undef pr_fmt +#endif + +#define pr_fmt (fmt) KBUILD_MODNAME ": " KBUILD_BASENAME ": " fmt +#include <linux/types.h> #include <linux/integrity.h> #include <crypto/sha.h>
That would create these string differences in security:
$ diff -urN old new --- old 2020-02-03 11:11:46.403134346 -0800 +++ new 2020-02-03 11:12:15.407135326 -0800 @@ -43,76 +43,81 @@ 2 48 8 14 xattr_data:271 80 68 8 data:306 2 48 8 9 entry:136 80 72 14 event_data:138 2 48 8 9 entry:305 80 72 14 event_data:306 -2ima: ahash calculation failed: err: %d +2ima: ima_crypto: ahash calculation failed: err: %d 3 32 4 13 hash_algo:318 48 4 14 digestsize:320 64 8 10 digest:319 3 32 4 13 hash_algo:339 48 4 18 cur_digestsize:341 64 8 14 cur_digest:340 3 32 4 7 pcr:134 48 4 11 namelen:134 64 4 21 template_data_len:134 3 32 8 8 data:277 64 8 9 datap:278 96 8 8 size:279 3 48 4 19 datalen_to_hash:489 64 256 10 buffer:486 384 376 16 __shash_desc:474 3 48 8 8 lnum:973 80 8 8 rule:952 112 48 8 args:971 -3Couldn't get size: 0x%lx -3Couldn't parse db signatures: %d -3Couldn't parse dbx signatures: %d -3Couldn't parse MokListRT signatures: %d -3Error reading db var: 0x%lx -3evm: Can not allocate %s (reason: %ld) -3evm: HMAC key is not set -3evm: key initialization failed -3ima: attempting to initialize the template "%s" failed -3ima: attempting to restore a incompatible measurement list -3ima: attempting to restore an unsupported template "%s" failed -3ima: attempting to restore a template name that is too long -3ima: attempting to restore the template fmt "%s" failed -3ima: attempting to restore too many measurements -3ima: Can not allocate %s (reason: %d) -3ima: Can not allocate %s (reason: %ld) -3ima: Error Communicating to TPM chip -3ima: Error Communicating to TPM chip, result: %d -3ima: field '%s' not found -3ima: format string '%s' contains too many fields -3ima: format string '%s' not valid, using template %s -3ima: impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall. -3ima: impossible to appraise a module without a file descriptor. sig_enforce kernel parameter might help -3ima: Invalid field with length %d -3ima: lsm rule update error %d -3ima: OUT OF MEMORY ERROR creating queue entry -3ima: Prevent firmware loading_store. -3ima: Prevent firmware sysfs fallback loading. -3ima: %s: buf end mismatch: expected: %p, current: %p -3ima: signed policy file (specified as an absolute pathname) required -3ima: %s: nr of fields mismatch: expected: %d, current: %d -3ima: template does not support hash alg -3ima: template %s init failed, result: %d -3ima: template %s not found, using %s -3ima: Unable to open file: %s (%d) -3integrity: Key '%s' is in ima_blacklist_keyring -3integrity: no %s keyring: %d -3integrity: Problem loading X.509 certificate %d -3integrity: Request for unknown key '%s' err %ld -3integrity: Unable to open file: %s (%d) -3MODSIGN: Couldn't get UEFI db list -3Unable to create integrity sysfs dir: %d +3evm: evm_crypto: Can not allocate %s (reason: %ld) +3evm: evm_crypto: HMAC key is not set +3evm: evm_crypto: key initialization failed +3ima: ima_crypto: Can not allocate %s (reason: %d) +3ima: ima_crypto: Can not allocate %s (reason: %ld) +3ima: ima_crypto: Error Communicating to TPM chip +3ima: ima_fs: signed policy file (specified as an absolute pathname) required +3ima: ima_fs: Unable to open file: %s (%d) +3ima: ima_main: impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall. +3ima: ima_main: impossible to appraise a module without a file descriptor. sig_enforce kernel parameter might help +3ima: ima_main: Prevent firmware loading_store. +3ima: ima_main: Prevent firmware sysfs fallback loading. +3ima: ima_main: template %s init failed, result: %d +3ima: ima_policy: lsm rule update error %d +3ima: ima_queue: Error Communicating to TPM chip, result: %d +3ima: ima_queue: OUT OF MEMORY ERROR creating queue entry +3ima: ima_template: attempting to initialize the template "%s" failed +3ima: ima_template: attempting to restore a incompatible measurement list +3ima: ima_template: attempting to restore an unsupported template "%s" failed +3ima: ima_template: attempting to restore a template name that is too long +3ima: ima_template: attempting to restore the template fmt "%s" failed +3ima: ima_template: attempting to restore too many measurements +3ima: ima_template: field '%s' not found +3ima: ima_template: format string '%s' contains too many fields +3ima: ima_template: format string '%s' not valid, using template %s +3ima: ima_template: Invalid field with length %d +3ima: ima_template_lib: %s: buf end mismatch: expected: %p, current: %p +3ima: ima_template_lib: %s: nr of fields mismatch: expected: %d, current: %d +3ima: ima_template: template does not support hash alg +3ima: ima_template: template %s init failed, result: %d +3ima: ima_template: template %s not found, using %s +3integrity: digsig_asymmetric: Key '%s' is in ima_blacklist_keyring +3integrity: digsig_asymmetric: Request for unknown key '%s' err %ld +3integrity: digsig: no %s keyring: %d +3integrity: digsig: Problem loading X.509 certificate %d +3integrity: digsig: Unable to open file: %s (%d) +3integrity: iint: Unable to create integrity sysfs dir: %d +3integrity: load_uefi: Couldn't get size: 0x%lx +3integrity: load_uefi: Couldn't parse db signatures: %d +3integrity: load_uefi: Couldn't parse dbx signatures: %d +3integrity: load_uefi: Couldn't parse MokListRT signatures: %d +3integrity: load_uefi: Error reading db var: 0x%lx +3integrity: load_uefi: MODSIGN: Couldn't get UEFI db list 4 32 8 8 entry:46 64 72 13 event_data:48 176 24 7 hash:55 240 240 11 tmp_iint:47 4 48 16 8 rbuf:209 80 16 13 rbuf_size:214 112 32 6 sg:212 176 104 8 wait:213 4 48 8 8 bufp:358 80 8 12 hdr_mask:362 112 64 7 hdr:353 208 34 17 template_name:350 -4ima: Couldn't register LSM notifier, error %d -4ima: rule for LSM '%s' is undefined -4ima: Skipping unknown architecture policy rule: %s -5ima: template with 'modsig' field also needs 'd-modsig' field -5integrity: Loaded X.509 cert '%s' -6evm: Error registering secfs -6evm: HMAC attrs: 0x%x -6evm: init_desc failed -6evm: Initialising EVM extended attributes: -6evm: key initialized -6evm: %s -6ima: Allocated hash algorithm: %s -6ima: Allocating %s failed, going to use default hash algorithm %s -6ima: No architecture policies found -6ima: No TPM chip found, activating TPM-bypass! -6ima: policy update %s -6ima: Unable to reopen file for reading. -6integrity: Can't allocate %s keyring (%d) -6integrity: Loading X.509 certificate: %s +4ima: ima_main: Couldn't register LSM notifier, error %d +4ima: ima_policy: rule for LSM '%s' is undefined +4ima: ima_policy: Skipping unknown architecture policy rule: %s +5ima: ima_policy: template with 'modsig' field also needs 'd-modsig' field +5integrity: digsig: Loaded X.509 cert '%s' +5integrity: platform_keyring: Platform Keyring initialized +6evm: evm_crypto: init_desc failed +6evm: evm_crypto: key initialized +6evm: evm_main: Error registering secfs +6evm: evm_main: HMAC attrs: 0x%x +6evm: evm_main: Initialising EVM extended attributes: +6evm: evm_main: %s +6ima: ima_crypto: Allocated hash algorithm: %s +6ima: ima_crypto: Unable to reopen file for reading. +6ima: ima_fs: policy update %s +6ima: ima_init: No TPM chip found, activating TPM-bypass! +6ima: ima_main: Allocating %s failed, going to use default hash algorithm %s +6ima: ima_policy: No architecture policies found +6integrity: digsig: Can't allocate %s keyring (%d) +6integrity: digsig: Loading X.509 certificate: %s +6integrity: load_uefi: Couldn't get UEFI dbx list +6integrity: load_uefi: Couldn't get UEFI MokListRT +6integrity: platform_keyring: Error adding keys to platform keyring %s 7 48 4 7 pcr:203 64 8 17 template_desc:198 96 8 11 pathbuf:199 128 8 12 pathname:201 160 8 15 xattr_value:204 192 8 10 modsig:205 224 255 12 filename:200 7 48 4 9 secid:706 64 4 7 pcr:690 80 8 9 entry:693 112 8 12 template:699 144 72 14 event_data:695 256 68 8 hash:703 368 240 8 iint:694