Skip to contentSkip to conversation

at91sam9x5ek: "no machine record defined" failure for core-image-minimal

meta-atmel Brian Karcz 3 participants 8 messages May 9, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

Not sure if this is the correct place to email this, but I've seen a few other meta-atmel references so I figured I'd give it a shot.

I'm attempting to setup a core-image-minimal build using the guidelines in the meta-atmel README for the at91sam9x5ek machine type. When the kernel build goes to link, I get a "no machine record defined" error. Is this something others are seeing in the meta-atmel demo builds?

It's a pretty benign build setup according to the README:

git clone git://git.yoctoproject.org/poky
cd poky
git checkout dora-10.0.1 -b dora-10.0.1
git clone git://git.openembedded.org/meta-openembedded
cd meta-openembedded
git checkout 6572316557e742c2dc93848e4d560242bf0c3995 -b my_branch cd ..
git clone http://github.com/linux4sam/meta-atmel
source oe-init-build-env /workspace/build-atmel

modify local.conf:

MACHINE ??= "at91sam9x5ek"

PACKAGE_CLASSES ?= "package_ipk"

modify bblayers.conf:

BBLAYERS ?= " \

  /opt/poky/meta-atmel \

  /opt/poky/meta \

  /opt/poky/meta-yocto \

  /opt/poky/meta-yocto-bsp \

  /opt/poky/meta-openembedded/meta-oe \

  /opt/poky/meta-openembedded/meta-networking \

"
bitbake core-image-minimal

Setting this up, I get the following build configuration and error:

/workspace/build-atmel$ bitbake core-image-minimal
Loading cache: 100% |######################################################################################| ETA: 00:00:00 Loaded 1782 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "at91sam9x5ek"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv5 thumb dsp"
TARGET_FPU        = "soft"
meta-atmel        = "master:269066a8128d1e767deee64854a142e67451a5f2"

meta
meta-yocto
meta-yocto-bsp = "dora-10.0.1:8e410e9e46e3335458a7747cdd32e05f5c19ccbb"
meta-oe
meta-networking = "my_branch:6572316557e742c2dc93848e4d560242bf0c3995"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)
ERROR: Logfile of failure stored in: /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291 Log data follows:

| DEBUG: Executing shell function do_compile
| NOTE: make -j 2 zImage CC=arm-poky-linux-gnueabi-gcc  -mno-thumb-interwork -marm LD=arm-poky-linux-gnueabi-ld.bfd
|   GEN     /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux-at91sam9x5ek-standard-build/Makefile
|   CHK     include/generated/uapi/linux/version.h
|   CHK     include/generated/utsrelease.h
|   Using /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux as source for kernel
| make[3]: `include/generated/mach-types.h' is up to date.
|   CC      scripts/mod/devicetable-offsets.s
|   GEN     scripts/mod/devicetable-offsets.h
|   HOSTCC  scripts/mod/file2alias.o
|   CALL    /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux/scripts/checksyscalls.sh
|   HOSTLD  scripts/mod/modpost
|   CHK     include/generated/compile.h
|   LINK    vmlinux
|   LD      vmlinux.o
|   MODPOST vmlinux.o
|   GEN     .version
|   CHK     include/generated/compile.h
|   UPD     include/generated/compile.h
|   CC      init/version.o
|   LD      init/built-in.o
| arm-poky-linux-gnueabi-ld.bfd: no machine record defined
| make[2]: *** [vmlinux] Error 1
| make[1]: *** [sub-make] Error 2
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Task 208 (/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 793 tasks of which 785 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any thoughts on what might be missing from the README or my implementation of it to get this demo build working?

Thanks,
Brian

#1 lore raw
Quoted 187 lines · Brian Karcz

Hi,

Not sure if this is the correct place to email this, but I’ve seen a few other meta-atmel references so I figured I’d give it a shot.

I’m attempting to setup a core-image-minimal build using the guidelines in the meta-atmel README for the at91sam9x5ek machine type. When the kernel build goes to link, I get a “no machine record defined” error. Is this something others are seeing in the meta-atmel demo builds?

It’s a pretty benign build setup according to the README:

git clone git://git.yoctoproject.org/poky

cd poky

git checkout dora-10.0.1 -b dora-10.0.1

git clone git://git.openembedded.org/meta-openembedded

cd meta-openembedded

git checkout 6572316557e742c2dc93848e4d560242bf0c3995 -b my_branch

cd ..

git clone http://github.com/linux4sam/meta-atmel

source oe-init-build-env /workspace/build-atmel

modify local.conf:

MACHINE ??= ”at91sam9x5ek”

PACKAGE_CLASSES ?= “package_ipk”

modify bblayers.conf:

BBLAYERS ?= " \

   /opt/poky/meta-atmel \

   /opt/poky/meta \

   /opt/poky/meta-yocto \

   /opt/poky/meta-yocto-bsp \

   /opt/poky/meta-openembedded/meta-oe \

   /opt/poky/meta-openembedded/meta-networking \
   "

bitbake core-image-minimal

Setting this up, I get the following build configuration and error:

/workspace/build-atmel$ bitbake core-image-minimal

Loading cache: 100%

|######################################################################################|
ETA:  00:00:00

Loaded 1782 entries from dependency cache.

NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION = "1.20.0"

BUILD_SYS = "x86_64-linux"

NATIVELSBSTRING = "Ubuntu-12.04"

TARGET_SYS = "arm-poky-linux-gnueabi"

MACHINE = "at91sam9x5ek"

DISTRO = "poky"

DISTRO_VERSION = "1.5.1"

TUNE_FEATURES = "armv5 thumb dsp"

TARGET_FPU = "soft"

meta-atmel = "master:269066a8128d1e767deee64854a142e67451a5f2"

meta

meta-yocto

meta-yocto-bsp = "dora-10.0.1:8e410e9e46e3335458a7747cdd32e05f5c19ccbb"

meta-oe

meta-networking = "my_branch:6572316557e742c2dc93848e4d560242bf0c3995"

NOTE: Preparing runqueue

NOTE: Executing SetScene Tasks

NOTE: Executing RunQueue Tasks

ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Logfile of failure stored in:
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291

Log data follows:

| DEBUG: Executing shell function do_compile

| NOTE: make -j 2 zImage CC=arm-poky-linux-gnueabi-gcc -mno-thumb-interwork -marm LD=arm-poky-linux-gnueabi-ld.bfd

| GEN
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux-at91sam9x5ek-standard-build/Makefile

| CHK include/generated/uapi/linux/version.h

| CHK include/generated/utsrelease.h

| Using
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux as source for kernel

| make[3]: `include/generated/mach-types.h' is up to date.

| CC scripts/mod/devicetable-offsets.s

| GEN scripts/mod/devicetable-offsets.h

| HOSTCC scripts/mod/file2alias.o

| CALL
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux/scripts/checksyscalls.sh

| HOSTLD scripts/mod/modpost

| CHK include/generated/compile.h

| LINK vmlinux

| LD vmlinux.o

| MODPOST vmlinux.o

| GEN .version

| CHK include/generated/compile.h

| UPD include/generated/compile.h

| CC init/version.o

| LD init/built-in.o

| arm-poky-linux-gnueabi-ld.bfd: no machine record defined

| make[2]: *** [vmlinux] Error 1

| make[1]: *** [sub-make] Error 2

| make: *** [all] Error 2

| ERROR: oe_runmake failed

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux-yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Task 208 (/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile) failed with exit code '1'

NOTE: Tasks Summary: Attempted 793 tasks of which 785 didn't need to be rerun and 1 failed.

Waiting for 0 running tasks to finish:

Summary: 1 task failed:

Quoted 7 lines

/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb,
do_compile

Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any thoughts on what might be missing from the README or my implementation of it to get this demo build working?

Can you confirm that the final .config for the board has the machine definitions that you'd expect for the board ?

Bruce

Quoted 7 lines

Thanks,

Brian

#2 lore raw

Hi Bruce,

I'm not entirely familiar with the mechanism that gets the defconfig from the BSP to the .config in work area, but here is how things currently look. The two files aren't a direct match as there appear to be some formatting differences, but the variables in the SOC/ARCH section seem to correlate partially (ie. it knows its trying to build for an at91sam9x5 SOC).

defconfig:

	CONFIG_ARCH_AT91=y
	CONFIG_SOC_AT91SAM9260=y
	CONFIG_SOC_AT91SAM9263=y
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	CONFIG_MACH_AT91SAM_DT=y

.config:

	#
	# Atmel AT91 Processor
	#
	# CONFIG_SOC_AT91RM9200 is not set
	CONFIG_SOC_AT91SAM9260=y
	# CONFIG_SOC_AT91SAM9261 is not set
	CONFIG_SOC_AT91SAM9263=y
	# CONFIG_SOC_AT91SAM9RL is not set
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	# CONFIG_SOC_AT91SAM9N12 is not set

	#
	# Atmel Non-DT world
	#
	CONFIG_ARCH_AT91_NONE=y
	# CONFIG_ARCH_AT91RM9200 is not set
	# CONFIG_ARCH_AT91SAM9260 is not set
	# CONFIG_ARCH_AT91SAM9261 is not set
	# CONFIG_ARCH_AT91SAM9263 is not set
	# CONFIG_ARCH_AT91SAM9RL is not set
	# CONFIG_ARCH_AT91SAM9G45 is not set

	#
	# AT91 Board Options
	#

	#
	# Generic Board Type
	#
	# CONFIG_MACH_AT91SAM9_DT is not set

Given the fact that the ARCH and DT variables don't appear to match, it looks like this might be device tree related.

I was hoping the code out of the box was going to be able to provide a demo image that I could build and poke around in for some guidance. My ultimate goal is to port the at91sam9x5ek machine definition to one for the at91sam9g20ek demo board and then port THAT over to a custom machine based roughly off that reference design.

-----Original Message-----
From: Bruce Ashfield [mailto:[email protected]]
Sent: Friday, May 09, 2014 9:55 AM
To: Brian Karcz; [email protected]
Subject: Re: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Quoted 196 lines · Brian Karcz

Hi,

Not sure if this is the correct place to email this, but I've seen a few other meta-atmel references so I figured I'd give it a shot.

I'm attempting to setup a core-image-minimal build using the guidelines in the meta-atmel README for the at91sam9x5ek machine type. When the kernel build goes to link, I get a "no machine record defined" error. Is this something others are seeing in the meta-atmel demo builds?

It's a pretty benign build setup according to the README:

git clone git://git.yoctoproject.org/poky

cd poky

git checkout dora-10.0.1 -b dora-10.0.1

git clone git://git.openembedded.org/meta-openembedded

cd meta-openembedded

git checkout 6572316557e742c2dc93848e4d560242bf0c3995 -b my_branch

cd ..

git clone http://github.com/linux4sam/meta-atmel

source oe-init-build-env /workspace/build-atmel

modify local.conf:

MACHINE ??= "at91sam9x5ek"

PACKAGE_CLASSES ?= "package_ipk"

modify bblayers.conf:

BBLAYERS ?= " \

   /opt/poky/meta-atmel \

   /opt/poky/meta \

   /opt/poky/meta-yocto \

   /opt/poky/meta-yocto-bsp \

   /opt/poky/meta-openembedded/meta-oe \

   /opt/poky/meta-openembedded/meta-networking \
   "

bitbake core-image-minimal

Setting this up, I get the following build configuration and error:

/workspace/build-atmel$ bitbake core-image-minimal

Loading cache: 100% |#####################################################################

|#################|
ETA:  00:00:00

Loaded 1782 entries from dependency cache.

NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION = "1.20.0"

BUILD_SYS = "x86_64-linux"

NATIVELSBSTRING = "Ubuntu-12.04"

TARGET_SYS = "arm-poky-linux-gnueabi"

MACHINE = "at91sam9x5ek"

DISTRO = "poky"

DISTRO_VERSION = "1.5.1"

TUNE_FEATURES = "armv5 thumb dsp"

TARGET_FPU = "soft"

meta-atmel = "master:269066a8128d1e767deee64854a142e67451a5f2"

meta

meta-yocto

meta-yocto-bsp = "dora-10.0.1:8e410e9e46e3335458a7747cdd32e05f5c19ccbb"

meta-oe

meta-networking = "my_branch:6572316557e742c2dc93848e4d560242bf0c3995"

NOTE: Preparing runqueue

NOTE: Executing SetScene Tasks

NOTE: Executing RunQueue Tasks

ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Logfile of failure stored in:
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291

Log data follows:

| DEBUG: Executing shell function do_compile

| NOTE: make -j 2 zImage CC=arm-poky-linux-gnueabi-gcc -mno-thumb-interwork -marm LD=arm-poky-linux-gnueabi-ld.bfd

| GEN
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux-at91sam9x5ek-standard-bu ild/Makefile

| CHK include/generated/uapi/linux/version.h

| CHK include/generated/utsrelease.h

| Using
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux
as source for kernel

| make[3]: `include/generated/mach-types.h' is up to date.

| CC scripts/mod/devicetable-offsets.s

| GEN scripts/mod/devicetable-offsets.h

| HOSTCC scripts/mod/file2alias.o

| CALL
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux/scripts/checksyscalls.sh

| HOSTLD scripts/mod/modpost

| CHK include/generated/compile.h

| LINK vmlinux

| LD vmlinux.o

| MODPOST vmlinux.o

| GEN .version

| CHK include/generated/compile.h

| UPD include/generated/compile.h

| CC init/version.o

| LD init/built-in.o

| arm-poky-linux-gnueabi-ld.bfd: no machine record defined

| make[2]: *** [vmlinux] Error 1

| make[1]: *** [sub-make] Error 2

| make: *** [all] Error 2

| ERROR: oe_runmake failed

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Task 208 (/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile) failed with exit code '1'

NOTE: Tasks Summary: Attempted 793 tasks of which 785 didn't need to be rerun and 1 failed.

Waiting for 0 running tasks to finish:

Summary: 1 task failed:

Quoted 7 lines

/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile

Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any thoughts on what might be missing from the README or my implementation of it to get this demo build working?

Can you confirm that the final .config for the board has the machine definitions that you'd expect for the board ?

Bruce

Quoted 7 lines

Thanks,

Brian

#3 lore raw
Quoted 45 lines · Brian Karcz

Hi Bruce,

I'm not entirely familiar with the mechanism that gets the defconfig from the BSP to the .config in work area, but here is how things currently look. The two files aren't a direct match as there appear to be some formatting differences, but the variables in the SOC/ARCH section seem to correlate partially (ie. it knows its trying to build for an at91sam9x5 SOC).

defconfig:

	CONFIG_ARCH_AT91=y
	CONFIG_SOC_AT91SAM9260=y
	CONFIG_SOC_AT91SAM9263=y
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	CONFIG_MACH_AT91SAM_DT=y

.config:

	#
	# Atmel AT91 Processor
	#
	# CONFIG_SOC_AT91RM9200 is not set
	CONFIG_SOC_AT91SAM9260=y
	# CONFIG_SOC_AT91SAM9261 is not set
	CONFIG_SOC_AT91SAM9263=y
	# CONFIG_SOC_AT91SAM9RL is not set
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	# CONFIG_SOC_AT91SAM9N12 is not set

	#
	# Atmel Non-DT world
	#
	CONFIG_ARCH_AT91_NONE=y
	# CONFIG_ARCH_AT91RM9200 is not set
	# CONFIG_ARCH_AT91SAM9260 is not set
	# CONFIG_ARCH_AT91SAM9261 is not set
	# CONFIG_ARCH_AT91SAM9263 is not set
	# CONFIG_ARCH_AT91SAM9RL is not set
	# CONFIG_ARCH_AT91SAM9G45 is not set

	#
	# AT91 Board Options
	#

	#
	# Generic Board Type
	#
	# CONFIG_MACH_AT91SAM9_DT is not set
Quoted 1 line

Given the fact that the ARCH and DT variables don't appear to match, it looks like this might be device tree related.

The reason I asked is that in the past, the error you are seeing was related to the machine not being properly defined in the kernel's .config.

FWIW, assuming you have a full "defconfig", and not a "save_defconfig" variant, the path from it to the final .config is pretty much a copy into the kernel and a "make oldconfig", so nothing is thrown away unless there is a missing dependency, or the Kconfig doesn't exist in the given kernel.

It's worth checking via menuconfig to see if anything obvious is missing, and trying some quick builds to rule out a bad configuration.

Bruce

Quoted 227 lines

I was hoping the code out of the box was going to be able to provide a demo image that I could build and poke around in for some guidance. My ultimate goal is to port the at91sam9x5ek machine definition to one for the at91sam9g20ek demo board and then port THAT over to a custom machine based roughly off that reference design.

-----Original Message-----
From: Bruce Ashfield [mailto:[email protected]]
Sent: Friday, May 09, 2014 9:55 AM
To: Brian Karcz; [email protected]
Subject: Re: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Quoted 196 lines · Brian Karcz

Hi,

Not sure if this is the correct place to email this, but I've seen a few other meta-atmel references so I figured I'd give it a shot.

I'm attempting to setup a core-image-minimal build using the guidelines in the meta-atmel README for the at91sam9x5ek machine type. When the kernel build goes to link, I get a "no machine record defined" error. Is this something others are seeing in the meta-atmel demo builds?

It's a pretty benign build setup according to the README:

git clone git://git.yoctoproject.org/poky

cd poky

git checkout dora-10.0.1 -b dora-10.0.1

git clone git://git.openembedded.org/meta-openembedded

cd meta-openembedded

git checkout 6572316557e742c2dc93848e4d560242bf0c3995 -b my_branch

cd ..

git clone http://github.com/linux4sam/meta-atmel

source oe-init-build-env /workspace/build-atmel

modify local.conf:

MACHINE ??= "at91sam9x5ek"

PACKAGE_CLASSES ?= "package_ipk"

modify bblayers.conf:

BBLAYERS ?= " \

    /opt/poky/meta-atmel \

    /opt/poky/meta \

    /opt/poky/meta-yocto \

    /opt/poky/meta-yocto-bsp \

    /opt/poky/meta-openembedded/meta-oe \

    /opt/poky/meta-openembedded/meta-networking \

    "

bitbake core-image-minimal

Setting this up, I get the following build configuration and error:

/workspace/build-atmel$ bitbake core-image-minimal

Loading cache: 100% |#####################################################################

|#################|
ETA:  00:00:00

Loaded 1782 entries from dependency cache.

NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION = "1.20.0"

BUILD_SYS = "x86_64-linux"

NATIVELSBSTRING = "Ubuntu-12.04"

TARGET_SYS = "arm-poky-linux-gnueabi"

MACHINE = "at91sam9x5ek"

DISTRO = "poky"

DISTRO_VERSION = "1.5.1"

TUNE_FEATURES = "armv5 thumb dsp"

TARGET_FPU = "soft"

meta-atmel = "master:269066a8128d1e767deee64854a142e67451a5f2"

meta

meta-yocto

meta-yocto-bsp = "dora-10.0.1:8e410e9e46e3335458a7747cdd32e05f5c19ccbb"

meta-oe

meta-networking = "my_branch:6572316557e742c2dc93848e4d560242bf0c3995"

NOTE: Preparing runqueue

NOTE: Executing SetScene Tasks

NOTE: Executing RunQueue Tasks

ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Logfile of failure stored in:
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291

Log data follows:

| DEBUG: Executing shell function do_compile

| NOTE: make -j 2 zImage CC=arm-poky-linux-gnueabi-gcc -mno-thumb-interwork -marm LD=arm-poky-linux-gnueabi-ld.bfd

| GEN
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux-at91sam9x5ek-standard-bu ild/Makefile

| CHK include/generated/uapi/linux/version.h

| CHK include/generated/utsrelease.h

| Using
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux
as source for kernel

| make[3]: `include/generated/mach-types.h' is up to date.

| CC scripts/mod/devicetable-offsets.s

| GEN scripts/mod/devicetable-offsets.h

| HOSTCC scripts/mod/file2alias.o

| CALL
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux/scripts/checksyscalls.sh

| HOSTLD scripts/mod/modpost

| CHK include/generated/compile.h

| LINK vmlinux

| LD vmlinux.o

| MODPOST vmlinux.o

| GEN .version

| CHK include/generated/compile.h

| UPD include/generated/compile.h

| CC init/version.o

| LD init/built-in.o

| arm-poky-linux-gnueabi-ld.bfd: no machine record defined

| make[2]: *** [vmlinux] Error 1

| make[1]: *** [sub-make] Error 2

| make: *** [all] Error 2

| ERROR: oe_runmake failed

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-gnueabi/linux- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Task 208 (/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile) failed with exit code '1'

NOTE: Tasks Summary: Attempted 793 tasks of which 785 didn't need to be rerun and 1 failed.

Waiting for 0 running tasks to finish:

Summary: 1 task failed:

Quoted 7 lines

/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile

Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any thoughts on what might be missing from the README or my implementation of it to get this demo build working?

Can you confirm that the final .config for the board has the machine definitions that you'd expect for the board ?

Bruce

Quoted 7 lines

Thanks,

Brian

#4 lore raw

Hi Bruce,

Yeah, that's the avenue I'm going to have to go down. I was hoping to avoid the trial by fire approach and learn by making small mods to an existing working build, but it looks like that might not be in the cards. I was hoping that one of the at91/linux4sam people or someone familiar with meta-atmel might be lurking in here and have seen the same issue when following the instructions in the layer's README file and have a "oh yeah, just tweak this..." fix.

I'll have to take a look through some of the linux-yocto-custom log files to see where the .config is getting generated from and whether the defconfig from the BSP kernel recipe is playing a roll in it. I'm guessing without an explicit board file (which there isn't) and the CONFIG_MACH_AT91SAM9_DT parameter not making its way from defconfig to the .config, that would explain why there is no machine record macro being declared.

I'll keep digging...

Thanks,
Brian

-----Original Message-----
From: Bruce Ashfield [mailto:[email protected]]
Sent: Friday, May 09, 2014 2:42 PM
To: Brian Karcz; [email protected]
Subject: Re: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

The reason I asked is that in the past, the error you are seeing was related to the machine not being properly defined in the kernel's .config.

FWIW, assuming you have a full "defconfig", and not a "save_defconfig"
variant, the path from it to the final .config is pretty much a copy into the kernel and a "make oldconfig", so nothing is thrown away unless there is a missing dependency, or the Kconfig doesn't exist in the given kernel.

It's worth checking via menuconfig to see if anything obvious is missing, and trying some quick builds to rule out a bad configuration.

Bruce

#5 lore raw
In reply to Bruce Ashfield

Brian,

Quoted 8 lines

-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Bruce Ashfield
Sent: Friday, May 09, 2014 2:42 PM
To: Brian Karcz; [email protected]
Subject: Re: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Quoted 8 lines
Quoted 3 lines · Brian Karcz

Hi Bruce,

I'm not entirely familiar with the mechanism that gets the defconfig from

the BSP to the .config in work area, but here is how things currently look. The two files aren't a direct match as there appear to be some formatting differences, but the variables in the SOC/ARCH section seem to correlate partially (ie. it knows its trying to build for an at91sam9x5 SOC).

I'm currently using a fork of the meta-atmel layer for my at91sam9g25 board. If I remember when they added at91sam9x5 support for meta-atmel, I think the layer was on kernel 3.6.9 and now it's on 3.10. There's been a lot of machine and device tree related configuration changes for this chipset between 3.6.9 and 3.10, so that configuration might not work for 3.10.

The configuration I'm currently using is over at https://github.com/evensonbryan/meta-atmel/tree/master/recipes-kernel/linux/files/at91sam9x5ek/linux-3.10-at91. It also has some patches I added in to pick up some missing peripheral support for my system. You may want to give that a try and see if it helps.

Regards,
Bryan

Quoted 321 lines
Quoted 42 lines

defconfig:

	CONFIG_ARCH_AT91=y
	CONFIG_SOC_AT91SAM9260=y
	CONFIG_SOC_AT91SAM9263=y
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	CONFIG_MACH_AT91SAM_DT=y

.config:

	#
	# Atmel AT91 Processor
	#
	# CONFIG_SOC_AT91RM9200 is not set
	CONFIG_SOC_AT91SAM9260=y
	# CONFIG_SOC_AT91SAM9261 is not set
	CONFIG_SOC_AT91SAM9263=y
	# CONFIG_SOC_AT91SAM9RL is not set
	CONFIG_SOC_AT91SAM9G45=y
	CONFIG_SOC_AT91SAM9X5=y
	# CONFIG_SOC_AT91SAM9N12 is not set

	#
	# Atmel Non-DT world
	#
	CONFIG_ARCH_AT91_NONE=y
	# CONFIG_ARCH_AT91RM9200 is not set
	# CONFIG_ARCH_AT91SAM9260 is not set
	# CONFIG_ARCH_AT91SAM9261 is not set
	# CONFIG_ARCH_AT91SAM9263 is not set
	# CONFIG_ARCH_AT91SAM9RL is not set
	# CONFIG_ARCH_AT91SAM9G45 is not set

	#
	# AT91 Board Options
	#

	#
	# Generic Board Type
	#
	# CONFIG_MACH_AT91SAM9_DT is not set
Quoted 1 line

Given the fact that the ARCH and DT variables don't appear to match, it

looks like this might be device tree related.

The reason I asked is that in the past, the error you are seeing was related to the machine not being properly defined in the kernel's .config.

FWIW, assuming you have a full "defconfig", and not a "save_defconfig" variant, the path from it to the final .config is pretty much a copy into the kernel and a "make oldconfig", so nothing is thrown away unless there is a missing dependency, or the Kconfig doesn't exist in the given kernel.

It's worth checking via menuconfig to see if anything obvious is missing, and trying some quick builds to rule out a bad configuration.

Bruce

Quoted 2 lines

I was hoping the code out of the box was going to be able to provide a

demo image that I could build and poke around in for some guidance. My ultimate goal is to port the at91sam9x5ek machine definition to one for the at91sam9g20ek demo board and then port THAT over to a custom machine based roughly off that reference design.

Quoted 17 lines

-----Original Message-----
From: Bruce Ashfield [mailto:[email protected]]
Sent: Friday, May 09, 2014 9:55 AM
To: Brian Karcz; [email protected]
Subject: Re: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Quoted 7 lines · Brian Karcz

Hi,

Not sure if this is the correct place to email this, but I've seen a few other meta-atmel references so I figured I'd give it a shot.

I'm attempting to setup a core-image-minimal build using the guidelines in the meta-atmel README for the at91sam9x5ek machine

type.

Quoted 2 lines
Quoted 2 lines

When the kernel build goes to link, I get a "no machine record defined" error. Is this something others are seeing in the meta-atmel

demo builds?

Quoted 45 lines
Quoted 45 lines

It's a pretty benign build setup according to the README:

git clone git://git.yoctoproject.org/poky

cd poky

git checkout dora-10.0.1 -b dora-10.0.1

git clone git://git.openembedded.org/meta-openembedded

cd meta-openembedded

git checkout 6572316557e742c2dc93848e4d560242bf0c3995 -b my_branch

cd ..

git clone http://github.com/linux4sam/meta-atmel

source oe-init-build-env /workspace/build-atmel

modify local.conf:

MACHINE ??= "at91sam9x5ek"

PACKAGE_CLASSES ?= "package_ipk"

modify bblayers.conf:

BBLAYERS ?= " \

    /opt/poky/meta-atmel \

    /opt/poky/meta \

    /opt/poky/meta-yocto \

    /opt/poky/meta-yocto-bsp \

    /opt/poky/meta-openembedded/meta-oe \

    /opt/poky/meta-openembedded/meta-networking \

    "
Quoted 8 lines
Quoted 8 lines

bitbake core-image-minimal

Setting this up, I get the following build configuration and error:

/workspace/build-atmel$ bitbake core-image-minimal

Loading cache: 100%

|#########################################################
###########

Quoted 28 lines
Quoted 28 lines

|#

|#################|
ETA:  00:00:00

Loaded 1782 entries from dependency cache.

NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION = "1.20.0"

BUILD_SYS = "x86_64-linux"

NATIVELSBSTRING = "Ubuntu-12.04"

TARGET_SYS = "arm-poky-linux-gnueabi"

MACHINE = "at91sam9x5ek"

DISTRO = "poky"

DISTRO_VERSION = "1.5.1"

TUNE_FEATURES = "armv5 thumb dsp"

TARGET_FPU = "soft"

Quoted 7 lines
Quoted 7 lines

meta-atmel = "master:269066a8128d1e767deee64854a142e67451a5f2"

meta

meta-yocto

meta-yocto-bsp = "dora-

10.0.1:8e410e9e46e3335458a7747cdd32e05f5c19ccbb"

Quoted 4 lines
Quoted 4 lines

meta-oe

meta-networking =

"my_branch:6572316557e742c2dc93848e4d560242bf0c3995"

Quoted 9 lines
Quoted 9 lines

NOTE: Preparing runqueue

NOTE: Executing SetScene Tasks

NOTE: Executing RunQueue Tasks

ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 5 lines
Quoted 5 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Logfile of failure stored in:
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 5 lines
Quoted 5 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291

Log data follows:

Quoted 7 lines
Quoted 7 lines

| DEBUG: Executing shell function do_compile

| NOTE: make -j 2 zImage CC=arm-poky-linux-gnueabi-gcc -mno-thumb-interwork -marm LD=arm-poky-linux-gnueabi-ld.bfd

| GEN
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 2 lines
Quoted 2 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux-at91sam9x5ek-

standard-b

Quoted 9 lines
Quoted 9 lines

u
ild/Makefile

| CHK include/generated/uapi/linux/version.h

| CHK include/generated/utsrelease.h

| Using
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 5 lines
Quoted 5 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux
as source for kernel

| make[3]: `include/generated/mach-types.h' is up to date.

Quoted 8 lines
Quoted 8 lines

| CC scripts/mod/devicetable-offsets.s

| GEN scripts/mod/devicetable-offsets.h

| HOSTCC scripts/mod/file2alias.o

| CALL
/workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 30 lines
Quoted 30 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/linux/scripts/checksyscalls.s h

| HOSTLD scripts/mod/modpost

| CHK include/generated/compile.h

| LINK vmlinux

| LD vmlinux.o

| MODPOST vmlinux.o

| GEN .version

| CHK include/generated/compile.h

| UPD include/generated/compile.h

| CC init/version.o

| LD init/built-in.o

| arm-poky-linux-gnueabi-ld.bfd: no machine record defined

| make[2]: *** [vmlinux] Error 1

| make[1]: *** [sub-make] Error 2

Quoted 8 lines
Quoted 8 lines

| make: *** [all] Error 2

| ERROR: oe_runmake failed

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_compile (log file is located at /workspace/build-atmel/tmp/work/at91sam9x5ek-poky-linux-

gnueabi/linux

Quoted 5 lines
Quoted 5 lines

- yocto-custom/3.10+AUTOINC+68f2c28207-r5/temp/log.do_compile.2291)

ERROR: Task 208 (/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-

custom_3.10.bb

Quoted 8 lines
Quoted 8 lines

,
do_compile) failed with exit code '1'

NOTE: Tasks Summary: Attempted 793 tasks of which 785 didn't need to be rerun and 1 failed.

Waiting for 0 running tasks to finish:

Quoted 7 lines
Quoted 7 lines

Summary: 1 task failed:

/opt/poky/meta-atmel/recipes-kernel/linux/linux-yocto-custom_3.10.bb, do_compile

Summary: There was 1 ERROR message shown, returning a non-zero exit

code.

Quoted 5 lines
Quoted 3 lines

Any thoughts on what might be missing from the README or my implementation of it to get this demo build working?

Can you confirm that the final .config for the board has the machine

definitions that you'd expect for the board ?

Quoted 11 lines

Bruce

Quoted 7 lines

Thanks,

Brian

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#6 lore raw

Hi Bryan,

Thanks for the tip. Any chance you tried assigning the PREFFERED_VERSION to 3.6.9 and using the linux4sam meta-atmel layer as is?

I'll definitely check out your layer. I was hoping the at91sam9x5ek would just build so that I could start tweaking it to define a machine works for its little brother, the at91sam9g20ek.

I'm coming from an older 2.6.30 kernel that used a board file instead of the device tree and was planning to use the demo build from meta-atmel and some small mods to give myself a crash course on device tree development. Looks like the learning curve might have steepened a bit.

Thanks,
Brian

-----Original Message-----
From: Bryan Evenson [mailto:[email protected]]
Sent: Friday, May 09, 2014 3:31 PM
To: Bruce Ashfield; Brian Karcz; [email protected]
Subject: RE: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Brian,

I'm currently using a fork of the meta-atmel layer for my at91sam9g25 board. If I remember when they added at91sam9x5 support for meta-atmel, I think the layer was on kernel 3.6.9 and now it's on 3.10. There's been a lot of machine and device tree related configuration changes for this chipset between 3.6.9 and 3.10, so that configuration might not work for 3.10.

The configuration I'm currently using is over at https://github.com/evensonbryan/meta-atmel/tree/master/recipes-kernel/linux/files/at91sam9x5ek/linux-3.10-at91. It also has some patches I added in to pick up some missing peripheral support for my system. You may want to give that a try and see if it helps.

Regards,
Bryan

#7 lore raw

Brian,

Quoted 12 lines

-----Original Message-----
From: Brian Karcz [mailto:[email protected]]
Sent: Friday, May 09, 2014 3:49 PM
To: Bryan Evenson; Bruce Ashfield; [email protected]
Subject: RE: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Hi Bryan,

Thanks for the tip. Any chance you tried assigning the PREFFERED_VERSION to 3.6.9 and using the linux4sam meta-atmel layer as is?

Quoted 8 lines

I'll definitely check out your layer. I was hoping the at91sam9x5ek would just build so that I could start tweaking it to define a machine works for its little brother, the at91sam9g20ek.

I'm coming from an older 2.6.30 kernel that used a board file instead of the device tree and was planning to use the demo build from meta-atmel and some small mods to give myself a crash course on device tree development. Looks like the learning curve might have steepened a bit.

I would take a look at using at least the 3.10 kernel from Atmel. It's the most stable one they have and it's where they've been backporting additional device tree support. I believe if you use my defconfig, you should be able to build a 3.10 kernel with Atmel's latest layer. And definitely start reading up on device tree development. It takes some getting used to but it is a good step forward.

Regards,
Bryan

Quoted 27 lines

Thanks,
Brian

-----Original Message-----
From: Bryan Evenson [mailto:[email protected]]
Sent: Friday, May 09, 2014 3:31 PM
To: Bruce Ashfield; Brian Karcz; [email protected]
Subject: RE: [yocto] [meta-atmel] at91sam9x5ek: "no machine record defined" failure for core-image-minimal

Brian,

I'm currently using a fork of the meta-atmel layer for my at91sam9g25 board. If I remember when they added at91sam9x5 support for meta-atmel, I think the layer was on kernel 3.6.9 and now it's on 3.10. There's been a lot of machine and device tree related configuration changes for this chipset between 3.6.9 and 3.10, so that configuration might not work for 3.10.

The configuration I'm currently using is over at
https://github.com/evensonbryan/meta-atmel/tree/master/recipes-
kernel/linux/files/at91sam9x5ek/linux-3.10-at91. It also has some patches I added in to pick up some missing peripheral support for my system. You may want to give that a try and see if it helps.

Regards,
Bryan