Skip to contentSkip to conversation

pci: ibmphp: Remove unused functions get_max_adapter_speed(), and get_bus_name() in ibmphp_core.c

PATCH In review Руслан Исаев 2 participants 2 messages Jul 14, 2020 PCI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pci: ibmphp: Remove unused functions get_max_adapter_speed(), and get_bus_name() in ibmphp_core.c

These functions are commented out and because of that, are unused.

---
 drivers/pci/hotplug/TODO          |  5 --- drivers/pci/hotplug/ibmphp_core.c | 74 -------------------------------

 2 files changed, 79 deletions(-)
drivers/pci/hotplug/TODO +0 -0
index a32070be5adf..856535858ddf 100644
@@ -30,11 +30,6 @@ ibmphp:

   or ibmphp should store a pointer to its bus in struct slot. Probably the former.

-* The functions get_max_adapter_speed() and get_bus_name() are commented out. -  Can they be deleted?  There are also forward declarations at the top of -  ibmphp_core.c as well as pointers in ibmphp_hotplug_slot_ops, likewise -  commented out.
-
 * ibmphp_init_devno() takes a struct slot **, it could instead take a struct slot *.

drivers/pci/hotplug/ibmphp_core.c +0 -0
index 17124254d897..197997e264a2 100644
@@ -50,14 +50,6 @@ static int irqs[16];    /* PIC mode IRQs we're using so far (in case MPS
 

 static int init_flag;

-/*
-static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8); -
-static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value) -{
-    return get_max_adapter_speed_1 (hs, value, 1);
-}
-*/
 static inline int get_cur_bus_info(struct slot **sl)
 {
     int rc = 1;
@@ -401,69 +393,6 @@ static int get_max_bus_speed(struct slot *slot) return rc;
 }

-/*
-static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 *value, u8 flag) -{
-    int rc = -ENODEV;
-    struct slot *pslot;
-    struct slot myslot;
-
-    debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n", -                        (ulong)hotplug_slot, (ulong) value);
-
-    if (flag)
-        ibmphp_lock_operations();
-
-    if (hotplug_slot && value) {
-        pslot = hotplug_slot->private;
-        if (pslot) {
-            memcpy(&myslot, pslot, sizeof(struct slot));
-            rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
-                        &(myslot.status));
-
-            if (!(SLOT_LATCH (myslot.status)) &&
-                    (SLOT_PRESENT (myslot.status))) {
-                rc = ibmphp_hpc_readslot(pslot,
-                        READ_EXTSLOTSTATUS,
-                        &(myslot.ext_status));
-                if (!rc)
-                    *value = SLOT_SPEED(myslot.ext_status);
-            } else
-                *value = MAX_ADAPTER_NONE;
-        }
-    }
-
-    if (flag)
-        ibmphp_unlock_operations();
-
-    debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value); -    return rc;
-}
-
-static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value)
-{
-    int rc = -ENODEV;
-    struct slot *pslot = NULL;
-
-    debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot); -
-    ibmphp_lock_operations();
-
-    if (hotplug_slot) {
-        pslot = hotplug_slot->private;
-        if (pslot) {
-            rc = 0;
-            snprintf(value, 100, "Bus %x", pslot->bus);
-        }
-    } else
-        rc = -ENODEV;
-
-    ibmphp_unlock_operations();
-    debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
-    return rc;
-}
-*/
- /****************************************************************************
  * This routine will initialize the ops data structure used in the validate
  * function. It will also power off empty slots that are powered on since BIOS @@ -1231,9 +1160,6 @@ const struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { .get_attention_status =        get_attention_status,
     .get_latch_status =        get_latch_status,
     .get_adapter_status =        get_adapter_present,
-/*    .get_max_adapter_speed =    get_max_adapter_speed,
-    .get_bus_name_status =        get_bus_name,
-*/
 };

 static void ibmphp_unload(void)

Signature · 1 line
2.27.0.windows.1
#1 lore raw
Quoted 1 line · Руслан Исаев

These functions are commented out and because of that, are unused.

Thanks for the patch. That driver is pretty much dead, but I'll certainly take patches that remove dead code. But it has a few problems to fix first.

Run "git log --oneline drivers/pci/hotplug/ibmphp_core.c" and make your subject line match.

See other patch hints here: https://lore.kernel.org/r/[email protected]

Doesn't apply cleanly, looks like it's whitespace-damaged. Send the patch to yourself and make sure it applies cleanly. Here's what happened when I tried:

02:05:27 ~/linux (pci/hotplug)$ b4 am -om/ https://lore.kernel.org/r/[email protected]
Looking up https://lore.kernel.org/r/4b9310fa-f030-b82c-1440-fe2a3a39e21d%40gmail.com
Grabbing thread from lore.kernel.org/linux-pci
Analyzing 1 messages in the thread
---
Writing m/20200714_ubijca16_pci_ibmphp_remove_unused_functions_get_max_adapter_speed_and_get_bus_name_in_ibmphp_core_c.mbx
[PATCH] pci: ibmphp: Remove unused functions get_max_adapter_speed(), and get_bus_name() in ibmphp_core.c
---
Total patches: 1
---

Base: not found (applies clean to current tree)
git am m/20200714_ubijca16_pci_ibmphp_remove_unused_functions_get_max_adapter_speed_and_get_bus_name_in_ibmphp_core_c.mbx
02:05:50 ~/linux (pci/hotplug)$ git am m/20200714_ubijca16_pci_ibmphp_remove_unused_functions_get_max_adapter_speed_and_get_bus_name_in_ibmphp_core_c.mbx
Applying: pci: ibmphp: Remove unused functions get_max_adapter_speed(), and get_bus_name() in ibmphp_core.c
error: corrupt patch at line 15
Patch failed at 0001 pci: ibmphp: Remove unused functions get_max_adapter_speed(), and get_bus_name() in ibmphp_core.c
hint: Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Quoted 133 lines

---
 drivers/pci/hotplug/TODO          |  5 --- drivers/pci/hotplug/ibmphp_core.c | 74 -------------------------------

 2 files changed, 79 deletions(-)
drivers/pci/hotplug/TODO +0 -0
index a32070be5adf..856535858ddf 100644
@@ -30,11 +30,6 @@ ibmphp:

   or ibmphp should store a pointer to its bus in struct slot. Probably the former.

-* The functions get_max_adapter_speed() and get_bus_name() are commented out.
-  Can they be deleted?  There are also forward declarations at the top of -  ibmphp_core.c as well as pointers in ibmphp_hotplug_slot_ops, likewise -  commented out.
-
 * ibmphp_init_devno() takes a struct slot **, it could instead take a struct slot *.

drivers/pci/hotplug/ibmphp_core.c +0 -0
index 17124254d897..197997e264a2 100644
@@ -50,14 +50,6 @@ static int irqs[16];    /* PIC mode IRQs we're using so

far (in case MPS

 static int init_flag;

drivers/pci/hotplug/ibmphp_core.c +0 -4
-/*
-static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8);
-
-static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8

*value)

drivers/pci/hotplug/ibmphp_core.c +0 -4
-{
-    return get_max_adapter_speed_1 (hs, value, 1);
-}
-*/

 static inline int get_cur_bus_info(struct slot **sl) {
     int rc = 1;

drivers/pci/hotplug/ibmphp_core.c +0 -63
@@ -401,69 +393,6 @@ static int get_max_bus_speed(struct slot *slot)
      return rc;
  }
 
-/*
-static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8
 *value, u8 flag)
-{
-    int rc = -ENODEV;
-    struct slot *pslot;
-    struct slot myslot;
-
-    debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx]
 pvalue[%lx]\n",
-                        (ulong)hotplug_slot, (ulong) value);
-
-    if (flag)
-        ibmphp_lock_operations();
-
-    if (hotplug_slot && value) {
-        pslot = hotplug_slot->private;
-        if (pslot) {
-            memcpy(&myslot, pslot, sizeof(struct slot));
-            rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
-                        &(myslot.status));
-
-            if (!(SLOT_LATCH (myslot.status)) &&
-                    (SLOT_PRESENT (myslot.status))) {
-                rc = ibmphp_hpc_readslot(pslot,
-                        READ_EXTSLOTSTATUS,
-                        &(myslot.ext_status));
-                if (!rc)
-                    *value = SLOT_SPEED(myslot.ext_status);
-            } else
-                *value = MAX_ADAPTER_NONE;
-        }
-    }
-
-    if (flag)
-        ibmphp_unlock_operations();
-
-    debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value);
-    return rc;
-}
-
-static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value)
-{
-    int rc = -ENODEV;
-    struct slot *pslot = NULL;
-
-    debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot);
-
-    ibmphp_lock_operations();
-
-    if (hotplug_slot) {
-        pslot = hotplug_slot->private;
-        if (pslot) {
-            rc = 0;
-            snprintf(value, 100, "Bus %x", pslot->bus);
-        }
-    } else
-        rc = -ENODEV;
-
-    ibmphp_unlock_operations();
-    debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
-    return rc;
-}
-*/
-
  /****************************************************************************

  * This routine will initialize the ops data structure used in the validate
  * function. It will also power off empty slots that are powered on since BIOS

drivers/pci/hotplug/ibmphp_core.c +0 -3
@@ -1231,9 +1160,6 @@ const struct hotplug_slot_ops ibmphp_hotplug_slot_ops
 = {
      .get_attention_status =        get_attention_status,
      .get_latch_status =        get_latch_status,
      .get_adapter_status =        get_adapter_present,
-/*    .get_max_adapter_speed =    get_max_adapter_speed,
-    .get_bus_name_status =        get_bus_name,
-*/
  };
 

 static void ibmphp_unload(void)

Signature · 1 line
2.27.0.windows.1