Skip to contentSkip to conversation

f2fs/015: test mount options

PATCH Superseded Chao Yu 2 participants 5 messages Jul 4, 2025 – Jul 9, 2025

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Chao Yu

author
#0 lore raw

PATCH v2 1/1 f2fs/015: test mount options

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---
v2:
- allow to check mount options w/ zoned device

 common/rc          |   3 +
 tests/f2fs/015     | 159 ++++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index f71cc8f0..94fdce7e 100644
@@ -844,6 +844,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +159 -0

159 lines not on this page · raw message

tests/f2fs/015.out new file +225 -0

225 lines not on this page · raw message

Signature · 1 line
2.49.0
#1 lore raw
Quoted 49 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---
v2:
- allow to check mount options w/ zoned device

 common/rc          |   3 +
 tests/f2fs/015     | 159 ++++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index f71cc8f0..94fdce7e 100644
@@ -844,6 +844,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +12 -0
new file mode 100755
index 00000000..746e79de
@@ -0,0 +1,159 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/015
+#
+# This testcase tries to check stability of mount result
+# w/ all f2fs supported mount option and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick
+_require_kernel_config CONFIG_F2FS_FS_XATTR

tests/f2fs/015 line 22

Quoted 10 lines
tests/f2fs/015 new file +10 -0
+_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
+_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
+
+_require_zoned_device "$TEST_DEV"

This requirement limit this test case only on zoned device... Maybe you can slip this test case to 2~3 cases, let some common mount options can be tested at first, some unimportant mount options can be tested in another case, then zoned device related mount options be tested in a seperated case ?

Thanks,
Zorro

Quoted 371 lines
tests/f2fs/015 new file +137 -0
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		""			\
+	"background_gc=off"		""			\
+	"background_gc=sync"		""			\
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"disable_roll_forward"		""			\
+	"norecovery"			""			\
+	"discard"			""			\
+	"nodiscard"			""			\
+	"no_heap"			""			\
+	"heap"				""			\
+	"user_xattr"			""			\
+	"nouser_xattr"			""			\
+	"acl"				""			\
+	"noacl"				""			\
+	"active_logs=2"			""			\
+	"active_logs=4"			""			\
+	"active_logs=6"			""			\
+	"disable_ext_identify"		""			\
+	"inline_xattr"			""			\
+	"noinline_xattr"		""			\
+	"inline_xattr_size=400"		"extra,flexible_inline_xattr"\
+	"inline_xattr_size=400"		""			\
+	"inline_data"			""			\
+	"noinline_dentry"		""			\
+	"inline_dentry"			""			\
+	"noinline_dentry"		""			\
+	"flush_merge"			""			\
+	"noflush_merge"			""			\
+	"barrier"			""			\
+	"nobarrier"			""			\
+	"fastboot"			""			\
+	"extent_cache"			""			\
+	"noextent_cache"		""			\
+	"data_flush"			""			\
+	"reserve_root=32768"		""			\
+	"resuid=1000"			""			\
+	"resgid=1000"			""			\
+	"fault_injection=100"		""			\
+	"fault_type=4095"		""			\
+	"mode=adaptive"			""			\
+	"mode=lfs"			""			\
+	"mode=fragment:segment"		""			\
+	"mode=fragment:block"		""			\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"usrquota"			""			\
+	"grpquota"			""			\
+	"prjquota"			""			\
+	"usrjquota=ausrquota"		""			\
+	"grpjquota=agrpquota"		""			\
+	"prjjquota=aprjquota"		""			\
+	"jqfmt=vfsold"			""			\
+	"jqfmt=vfsv0"			""			\
+	"jqfmt=vfsv1"			""			\
+	"usrjquota="			""			\
+	"grpjquota="			""			\
+	"prjjquota="			""			\
+	"quota"				""			\
+	"noquota"			""			\
+	"alloc_mode=reuse"		""			\
+	"alloc_mode=default"		""			\
+	"fsync_mode=posix"		""			\
+	"fsync_mode=strict"		""			\
+	"fsync_mode=nobarrier"		""			\
+	"test_dummy_encryption"		""			\
+	"test_dummy_encryption=v1"	""			\
+	"test_dummy_encryption=v2"	""			\
+	"checkpoint=enable"		""			\
+	"checkpoint=disable"		""			\
+	"checkpoint=disable:32768"	""			\
+	"checkpoint=disable:50%"	""			\
+	"checkpoint_merge"		""			\
+	"nocheckpoint_merge"		""			\
+	"compress_algorithm=lzo"	""			\
+	"compress_algorithm=lzo"	"extra,compression"	\
+	"compress_algorithm=lz4"	"extra,compression"	\
+	"compress_algorithm=zstd"	"extra,compression"	\
+	"compress_algorithm=lzo-rle"	"extra,compression"	\
+	"compress_algorithm=lz4:3"	"extra,compression"	\
+	"compress_algorithm=zstd:1"	"extra,compression"	\
+	"compress_log_size=8"		"extra,compression"	\
+	"compress_extension=so"		"extra,compression"	\
+	"nocompress_extension=so"	"extra,compression"	\
+	"nocompress_extension=*"	"extra,compression"	\
+	"compress_extension=so,nocompress_extension=so"		\
+					"extra,compression"	\
+	"compress_chksum"		"extra,compression"	\
+	"compress_mode=fs"		"extra,compression"	\
+	"compress_mode=user"		"extra,compression"	\
+	"compress_cache"		"extra,compression"	\
+	"inlinecrypt"			""			\
+	"atgc"				""			\
+	"discard_unit=block"		""			\
+	"discard_unit=segment"		""			\
+	"discard_unit=section"		""			\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+	"memory=normal"			""			\
+	"memory=low"			""			\
+	"age_extent_cache"		""			\
+	"errors=panic"			""			\
+	"errors=continue"		""			\
+	"errors=remount-ro"		""			\
+	"nat_bits"			""			\
+	"atgc,mode=lfs"			""			\
+	"ro,flush_merge"		""			\
+	"rw"				"ro"			\
+	"norecovery,ro"			""			\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	if [ "${options[$((i+1))]}" == "blkzone" ]; then
+		_test_mkfs "-m" >> $seqres.full
+		_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_test_unmount >> $seqres.full 2>&1
+	else
+		_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full
+		_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_scratch_unmount >> $seqres.full 2>&1
+	fi
+done
+
+status=0
+exit
tests/f2fs/015.out new file +225 -0
new file mode 100644
index 00000000..d7f4e62a
@@ -0,0 +1,225 @@
+QA output created by 015
+Option#0: background_gc=on : 
+0
+Option#2: background_gc=off : 
+0
+Option#4: background_gc=sync : 
+0
+Option#6: background_gc=on : blkzone
+0
+Option#8: background_gc=off : blkzone
+32
+Option#10: background_gc=sync : blkzone
+0
+Option#12: disable_roll_forward : 
+0
+Option#14: norecovery : 
+32
+Option#16: discard : 
+0
+Option#18: nodiscard : 
+0
+Option#20: no_heap : 
+0
+Option#22: heap : 
+0
+Option#24: user_xattr : 
+0
+Option#26: nouser_xattr : 
+0
+Option#28: acl : 
+0
+Option#30: noacl : 
+0
+Option#32: active_logs=2 : 
+0
+Option#34: active_logs=4 : 
+0
+Option#36: active_logs=6 : 
+0
+Option#38: disable_ext_identify : 
+0
+Option#40: inline_xattr : 
+0
+Option#42: noinline_xattr : 
+0
+Option#44: inline_xattr_size=400 : extra,flexible_inline_xattr
+32
+Option#46: inline_xattr_size=400 : 
+32
+Option#48: inline_data : 
+0
+Option#50: noinline_dentry : 
+0
+Option#52: inline_dentry : 
+0
+Option#54: noinline_dentry : 
+0
+Option#56: flush_merge : 
+0
+Option#58: noflush_merge : 
+0
+Option#60: barrier : 
+0
+Option#62: nobarrier : 
+0
+Option#64: fastboot : 
+0
+Option#66: extent_cache : 
+0
+Option#68: noextent_cache : 
+0
+Option#70: data_flush : 
+0
+Option#72: reserve_root=32768 : 
+0
+Option#74: resuid=1000 : 
+0
+Option#76: resgid=1000 : 
+0
+Option#78: fault_injection=100 : 
+0
+Option#80: fault_type=4095 : 
+0
+Option#82: mode=adaptive : 
+0
+Option#84: mode=lfs : 
+0
+Option#86: mode=fragment:segment : 
+0
+Option#88: mode=fragment:block : 
+0
+Option#90: mode=adaptive : blkzone
+32
+Option#92: mode=lfs : blkzone
+0
+Option#94: mode=fragment:segment : blkzone
+32
+Option#96: mode=fragment:block : blkzone
+32
+Option#98: usrquota : 
+0
+Option#100: grpquota : 
+0
+Option#102: prjquota : 
+32
+Option#104: usrjquota=ausrquota : 
+32
+Option#106: grpjquota=agrpquota : 
+32
+Option#108: prjjquota=aprjquota : 
+32
+Option#110: jqfmt=vfsold : 
+0
+Option#112: jqfmt=vfsv0 : 
+0
+Option#114: jqfmt=vfsv1 : 
+0
+Option#116: usrjquota= : 
+0
+Option#118: grpjquota= : 
+0
+Option#120: prjjquota= : 
+0
+Option#122: quota : 
+0
+Option#124: noquota : 
+0
+Option#126: alloc_mode=reuse : 
+0
+Option#128: alloc_mode=default : 
+0
+Option#130: fsync_mode=posix : 
+0
+Option#132: fsync_mode=strict : 
+0
+Option#134: fsync_mode=nobarrier : 
+0
+Option#136: test_dummy_encryption : 
+32
+Option#138: test_dummy_encryption=v1 : 
+32
+Option#140: test_dummy_encryption=v2 : 
+32
+Option#142: checkpoint=enable : 
+0
+Option#144: checkpoint=disable : 
+0
+Option#146: checkpoint=disable:32768 : 
+0
+Option#148: checkpoint=disable:50% : 
+0
+Option#150: checkpoint_merge : 
+0
+Option#152: nocheckpoint_merge : 
+0
+Option#154: compress_algorithm=lzo : 
+0
+Option#156: compress_algorithm=lzo : extra,compression
+0
+Option#158: compress_algorithm=lz4 : extra,compression
+0
+Option#160: compress_algorithm=zstd : extra,compression
+0
+Option#162: compress_algorithm=lzo-rle : extra,compression
+0
+Option#164: compress_algorithm=lz4:3 : extra,compression
+0
+Option#166: compress_algorithm=zstd:1 : extra,compression
+0
+Option#168: compress_log_size=8 : extra,compression
+0
+Option#170: compress_extension=so : extra,compression
+0
+Option#172: nocompress_extension=so : extra,compression
+0
+Option#174: nocompress_extension=* : extra,compression
+0
+Option#176: compress_extension=so,nocompress_extension=so : extra,compression
+0
+Option#178: compress_chksum : extra,compression
+0
+Option#180: compress_mode=fs : extra,compression
+0
+Option#182: compress_mode=user : extra,compression
+0
+Option#184: compress_cache : extra,compression
+0
+Option#186: inlinecrypt : 
+0
+Option#188: atgc : 
+0
+Option#190: discard_unit=block : 
+0
+Option#192: discard_unit=segment : 
+0
+Option#194: discard_unit=section : 
+0
+Option#196: discard_unit=block : blkzone
+0
+Option#198: discard_unit=segment : blkzone
+0
+Option#200: discard_unit=section : blkzone
+0
+Option#202: memory=normal : 
+0
+Option#204: memory=low : 
+0
+Option#206: age_extent_cache : 
+0
+Option#208: errors=panic : 
+0
+Option#210: errors=continue : 
+0
+Option#212: errors=remount-ro : 
+0
+Option#214: nat_bits : 
+0
+Option#216: atgc,mode=lfs : 
+32
+Option#218: ro,flush_merge : 
+32
+Option#220: rw : ro
+0
+Option#222: norecovery,ro : 
+0
Signature · 1 line
2.49.0
author
#2 lore raw
Quoted 58 lines · Zorro Lang
Quoted 57 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---
v2:
- allow to check mount options w/ zoned device

 common/rc          |   3 +
 tests/f2fs/015     | 159 ++++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index f71cc8f0..94fdce7e 100644
@@ -844,6 +844,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +20 -0
new file mode 100755
index 00000000..746e79de
@@ -0,0 +1,159 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/015
+#
+# This testcase tries to check stability of mount result
+# w/ all f2fs supported mount option and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick
+_require_kernel_config CONFIG_F2FS_FS_XATTR
+_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
+_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
Quoted 8 lines

tests/f2fs/015 line 22

Quoted 2 lines
tests/f2fs/015 new file +2 -0
+
+_require_zoned_device "$TEST_DEV"

This requirement limit this test case only on zoned device... Maybe you can slip this test case to 2~3 cases, let some common mount options can be tested at first, some unimportant mount options can be tested in another case, then zoned device related mount options be tested in a seperated case ?

Good idea, do you want to uplift common mount option testcase to generic/ directory? or is it fine to leave it in f2fs/ now?

Thanks,

Quoted 376 lines

Thanks,
Zorro

Quoted 371 lines
tests/f2fs/015 new file +137 -0
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		""			\
+	"background_gc=off"		""			\
+	"background_gc=sync"		""			\
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"disable_roll_forward"		""			\
+	"norecovery"			""			\
+	"discard"			""			\
+	"nodiscard"			""			\
+	"no_heap"			""			\
+	"heap"				""			\
+	"user_xattr"			""			\
+	"nouser_xattr"			""			\
+	"acl"				""			\
+	"noacl"				""			\
+	"active_logs=2"			""			\
+	"active_logs=4"			""			\
+	"active_logs=6"			""			\
+	"disable_ext_identify"		""			\
+	"inline_xattr"			""			\
+	"noinline_xattr"		""			\
+	"inline_xattr_size=400"		"extra,flexible_inline_xattr"\
+	"inline_xattr_size=400"		""			\
+	"inline_data"			""			\
+	"noinline_dentry"		""			\
+	"inline_dentry"			""			\
+	"noinline_dentry"		""			\
+	"flush_merge"			""			\
+	"noflush_merge"			""			\
+	"barrier"			""			\
+	"nobarrier"			""			\
+	"fastboot"			""			\
+	"extent_cache"			""			\
+	"noextent_cache"		""			\
+	"data_flush"			""			\
+	"reserve_root=32768"		""			\
+	"resuid=1000"			""			\
+	"resgid=1000"			""			\
+	"fault_injection=100"		""			\
+	"fault_type=4095"		""			\
+	"mode=adaptive"			""			\
+	"mode=lfs"			""			\
+	"mode=fragment:segment"		""			\
+	"mode=fragment:block"		""			\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"usrquota"			""			\
+	"grpquota"			""			\
+	"prjquota"			""			\
+	"usrjquota=ausrquota"		""			\
+	"grpjquota=agrpquota"		""			\
+	"prjjquota=aprjquota"		""			\
+	"jqfmt=vfsold"			""			\
+	"jqfmt=vfsv0"			""			\
+	"jqfmt=vfsv1"			""			\
+	"usrjquota="			""			\
+	"grpjquota="			""			\
+	"prjjquota="			""			\
+	"quota"				""			\
+	"noquota"			""			\
+	"alloc_mode=reuse"		""			\
+	"alloc_mode=default"		""			\
+	"fsync_mode=posix"		""			\
+	"fsync_mode=strict"		""			\
+	"fsync_mode=nobarrier"		""			\
+	"test_dummy_encryption"		""			\
+	"test_dummy_encryption=v1"	""			\
+	"test_dummy_encryption=v2"	""			\
+	"checkpoint=enable"		""			\
+	"checkpoint=disable"		""			\
+	"checkpoint=disable:32768"	""			\
+	"checkpoint=disable:50%"	""			\
+	"checkpoint_merge"		""			\
+	"nocheckpoint_merge"		""			\
+	"compress_algorithm=lzo"	""			\
+	"compress_algorithm=lzo"	"extra,compression"	\
+	"compress_algorithm=lz4"	"extra,compression"	\
+	"compress_algorithm=zstd"	"extra,compression"	\
+	"compress_algorithm=lzo-rle"	"extra,compression"	\
+	"compress_algorithm=lz4:3"	"extra,compression"	\
+	"compress_algorithm=zstd:1"	"extra,compression"	\
+	"compress_log_size=8"		"extra,compression"	\
+	"compress_extension=so"		"extra,compression"	\
+	"nocompress_extension=so"	"extra,compression"	\
+	"nocompress_extension=*"	"extra,compression"	\
+	"compress_extension=so,nocompress_extension=so"		\
+					"extra,compression"	\
+	"compress_chksum"		"extra,compression"	\
+	"compress_mode=fs"		"extra,compression"	\
+	"compress_mode=user"		"extra,compression"	\
+	"compress_cache"		"extra,compression"	\
+	"inlinecrypt"			""			\
+	"atgc"				""			\
+	"discard_unit=block"		""			\
+	"discard_unit=segment"		""			\
+	"discard_unit=section"		""			\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+	"memory=normal"			""			\
+	"memory=low"			""			\
+	"age_extent_cache"		""			\
+	"errors=panic"			""			\
+	"errors=continue"		""			\
+	"errors=remount-ro"		""			\
+	"nat_bits"			""			\
+	"atgc,mode=lfs"			""			\
+	"ro,flush_merge"		""			\
+	"rw"				"ro"			\
+	"norecovery,ro"			""			\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	if [ "${options[$((i+1))]}" == "blkzone" ]; then
+		_test_mkfs "-m" >> $seqres.full
+		_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_test_unmount >> $seqres.full 2>&1
+	else
+		_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full
+		_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_scratch_unmount >> $seqres.full 2>&1
+	fi
+done
+
+status=0
+exit
tests/f2fs/015.out new file +225 -0
new file mode 100644
index 00000000..d7f4e62a
@@ -0,0 +1,225 @@
+QA output created by 015
+Option#0: background_gc=on : 
+0
+Option#2: background_gc=off : 
+0
+Option#4: background_gc=sync : 
+0
+Option#6: background_gc=on : blkzone
+0
+Option#8: background_gc=off : blkzone
+32
+Option#10: background_gc=sync : blkzone
+0
+Option#12: disable_roll_forward : 
+0
+Option#14: norecovery : 
+32
+Option#16: discard : 
+0
+Option#18: nodiscard : 
+0
+Option#20: no_heap : 
+0
+Option#22: heap : 
+0
+Option#24: user_xattr : 
+0
+Option#26: nouser_xattr : 
+0
+Option#28: acl : 
+0
+Option#30: noacl : 
+0
+Option#32: active_logs=2 : 
+0
+Option#34: active_logs=4 : 
+0
+Option#36: active_logs=6 : 
+0
+Option#38: disable_ext_identify : 
+0
+Option#40: inline_xattr : 
+0
+Option#42: noinline_xattr : 
+0
+Option#44: inline_xattr_size=400 : extra,flexible_inline_xattr
+32
+Option#46: inline_xattr_size=400 : 
+32
+Option#48: inline_data : 
+0
+Option#50: noinline_dentry : 
+0
+Option#52: inline_dentry : 
+0
+Option#54: noinline_dentry : 
+0
+Option#56: flush_merge : 
+0
+Option#58: noflush_merge : 
+0
+Option#60: barrier : 
+0
+Option#62: nobarrier : 
+0
+Option#64: fastboot : 
+0
+Option#66: extent_cache : 
+0
+Option#68: noextent_cache : 
+0
+Option#70: data_flush : 
+0
+Option#72: reserve_root=32768 : 
+0
+Option#74: resuid=1000 : 
+0
+Option#76: resgid=1000 : 
+0
+Option#78: fault_injection=100 : 
+0
+Option#80: fault_type=4095 : 
+0
+Option#82: mode=adaptive : 
+0
+Option#84: mode=lfs : 
+0
+Option#86: mode=fragment:segment : 
+0
+Option#88: mode=fragment:block : 
+0
+Option#90: mode=adaptive : blkzone
+32
+Option#92: mode=lfs : blkzone
+0
+Option#94: mode=fragment:segment : blkzone
+32
+Option#96: mode=fragment:block : blkzone
+32
+Option#98: usrquota : 
+0
+Option#100: grpquota : 
+0
+Option#102: prjquota : 
+32
+Option#104: usrjquota=ausrquota : 
+32
+Option#106: grpjquota=agrpquota : 
+32
+Option#108: prjjquota=aprjquota : 
+32
+Option#110: jqfmt=vfsold : 
+0
+Option#112: jqfmt=vfsv0 : 
+0
+Option#114: jqfmt=vfsv1 : 
+0
+Option#116: usrjquota= : 
+0
+Option#118: grpjquota= : 
+0
+Option#120: prjjquota= : 
+0
+Option#122: quota : 
+0
+Option#124: noquota : 
+0
+Option#126: alloc_mode=reuse : 
+0
+Option#128: alloc_mode=default : 
+0
+Option#130: fsync_mode=posix : 
+0
+Option#132: fsync_mode=strict : 
+0
+Option#134: fsync_mode=nobarrier : 
+0
+Option#136: test_dummy_encryption : 
+32
+Option#138: test_dummy_encryption=v1 : 
+32
+Option#140: test_dummy_encryption=v2 : 
+32
+Option#142: checkpoint=enable : 
+0
+Option#144: checkpoint=disable : 
+0
+Option#146: checkpoint=disable:32768 : 
+0
+Option#148: checkpoint=disable:50% : 
+0
+Option#150: checkpoint_merge : 
+0
+Option#152: nocheckpoint_merge : 
+0
+Option#154: compress_algorithm=lzo : 
+0
+Option#156: compress_algorithm=lzo : extra,compression
+0
+Option#158: compress_algorithm=lz4 : extra,compression
+0
+Option#160: compress_algorithm=zstd : extra,compression
+0
+Option#162: compress_algorithm=lzo-rle : extra,compression
+0
+Option#164: compress_algorithm=lz4:3 : extra,compression
+0
+Option#166: compress_algorithm=zstd:1 : extra,compression
+0
+Option#168: compress_log_size=8 : extra,compression
+0
+Option#170: compress_extension=so : extra,compression
+0
+Option#172: nocompress_extension=so : extra,compression
+0
+Option#174: nocompress_extension=* : extra,compression
+0
+Option#176: compress_extension=so,nocompress_extension=so : extra,compression
+0
+Option#178: compress_chksum : extra,compression
+0
+Option#180: compress_mode=fs : extra,compression
+0
+Option#182: compress_mode=user : extra,compression
+0
+Option#184: compress_cache : extra,compression
+0
+Option#186: inlinecrypt : 
+0
+Option#188: atgc : 
+0
+Option#190: discard_unit=block : 
+0
+Option#192: discard_unit=segment : 
+0
+Option#194: discard_unit=section : 
+0
+Option#196: discard_unit=block : blkzone
+0
+Option#198: discard_unit=segment : blkzone
+0
+Option#200: discard_unit=section : blkzone
+0
+Option#202: memory=normal : 
+0
+Option#204: memory=low : 
+0
+Option#206: age_extent_cache : 
+0
+Option#208: errors=panic : 
+0
+Option#210: errors=continue : 
+0
+Option#212: errors=remount-ro : 
+0
+Option#214: nat_bits : 
+0
+Option#216: atgc,mode=lfs : 
+32
+Option#218: ro,flush_merge : 
+32
+Option#220: rw : ro
+0
+Option#222: norecovery,ro : 
+0
Signature · 1 line
2.49.0
#3 lore raw
Quoted 68 lines · Chao Yu
Quoted 58 lines · Zorro Lang
Quoted 57 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---
v2:
- allow to check mount options w/ zoned device

 common/rc          |   3 +
 tests/f2fs/015     | 159 ++++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index f71cc8f0..94fdce7e 100644
@@ -844,6 +844,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +20 -0
new file mode 100755
index 00000000..746e79de
@@ -0,0 +1,159 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/015
+#
+# This testcase tries to check stability of mount result
+# w/ all f2fs supported mount option and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick
+_require_kernel_config CONFIG_F2FS_FS_XATTR
+_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
+_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
Quoted 8 lines

tests/f2fs/015 line 22

Quoted 2 lines
tests/f2fs/015 new file +2 -0
+
+_require_zoned_device "$TEST_DEV"

This requirement limit this test case only on zoned device... Maybe you can slip this test case to 2~3 cases, let some common mount options can be tested at first, some unimportant mount options can be tested in another case, then zoned device related mount options be tested in a seperated case ?

Quoted 2 lines

Good idea, do you want to uplift common mount option testcase to generic/ directory? or is it fine to leave it in f2fs/ now?

If you'd like to write a test case for mount(8) "COMMAND-LINE OPTIONS" and "FILESYSTEM-INDEPENDENT MOUNT OPTIONS", that's good too :)

For this case I think it's fine to leave it in f2fs. Since new-mount APIs were brought in, more and more filesystems have their own xfs mount options test cases as what you are doing for f2fs now. These cases are $FSTYP specific test mostly.

Thanks,
Zorro

Quoted 380 lines

Thanks,

Quoted 376 lines

Thanks,
Zorro

Quoted 371 lines
tests/f2fs/015 new file +137 -0
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		""			\
+	"background_gc=off"		""			\
+	"background_gc=sync"		""			\
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"disable_roll_forward"		""			\
+	"norecovery"			""			\
+	"discard"			""			\
+	"nodiscard"			""			\
+	"no_heap"			""			\
+	"heap"				""			\
+	"user_xattr"			""			\
+	"nouser_xattr"			""			\
+	"acl"				""			\
+	"noacl"				""			\
+	"active_logs=2"			""			\
+	"active_logs=4"			""			\
+	"active_logs=6"			""			\
+	"disable_ext_identify"		""			\
+	"inline_xattr"			""			\
+	"noinline_xattr"		""			\
+	"inline_xattr_size=400"		"extra,flexible_inline_xattr"\
+	"inline_xattr_size=400"		""			\
+	"inline_data"			""			\
+	"noinline_dentry"		""			\
+	"inline_dentry"			""			\
+	"noinline_dentry"		""			\
+	"flush_merge"			""			\
+	"noflush_merge"			""			\
+	"barrier"			""			\
+	"nobarrier"			""			\
+	"fastboot"			""			\
+	"extent_cache"			""			\
+	"noextent_cache"		""			\
+	"data_flush"			""			\
+	"reserve_root=32768"		""			\
+	"resuid=1000"			""			\
+	"resgid=1000"			""			\
+	"fault_injection=100"		""			\
+	"fault_type=4095"		""			\
+	"mode=adaptive"			""			\
+	"mode=lfs"			""			\
+	"mode=fragment:segment"		""			\
+	"mode=fragment:block"		""			\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"usrquota"			""			\
+	"grpquota"			""			\
+	"prjquota"			""			\
+	"usrjquota=ausrquota"		""			\
+	"grpjquota=agrpquota"		""			\
+	"prjjquota=aprjquota"		""			\
+	"jqfmt=vfsold"			""			\
+	"jqfmt=vfsv0"			""			\
+	"jqfmt=vfsv1"			""			\
+	"usrjquota="			""			\
+	"grpjquota="			""			\
+	"prjjquota="			""			\
+	"quota"				""			\
+	"noquota"			""			\
+	"alloc_mode=reuse"		""			\
+	"alloc_mode=default"		""			\
+	"fsync_mode=posix"		""			\
+	"fsync_mode=strict"		""			\
+	"fsync_mode=nobarrier"		""			\
+	"test_dummy_encryption"		""			\
+	"test_dummy_encryption=v1"	""			\
+	"test_dummy_encryption=v2"	""			\
+	"checkpoint=enable"		""			\
+	"checkpoint=disable"		""			\
+	"checkpoint=disable:32768"	""			\
+	"checkpoint=disable:50%"	""			\
+	"checkpoint_merge"		""			\
+	"nocheckpoint_merge"		""			\
+	"compress_algorithm=lzo"	""			\
+	"compress_algorithm=lzo"	"extra,compression"	\
+	"compress_algorithm=lz4"	"extra,compression"	\
+	"compress_algorithm=zstd"	"extra,compression"	\
+	"compress_algorithm=lzo-rle"	"extra,compression"	\
+	"compress_algorithm=lz4:3"	"extra,compression"	\
+	"compress_algorithm=zstd:1"	"extra,compression"	\
+	"compress_log_size=8"		"extra,compression"	\
+	"compress_extension=so"		"extra,compression"	\
+	"nocompress_extension=so"	"extra,compression"	\
+	"nocompress_extension=*"	"extra,compression"	\
+	"compress_extension=so,nocompress_extension=so"		\
+					"extra,compression"	\
+	"compress_chksum"		"extra,compression"	\
+	"compress_mode=fs"		"extra,compression"	\
+	"compress_mode=user"		"extra,compression"	\
+	"compress_cache"		"extra,compression"	\
+	"inlinecrypt"			""			\
+	"atgc"				""			\
+	"discard_unit=block"		""			\
+	"discard_unit=segment"		""			\
+	"discard_unit=section"		""			\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+	"memory=normal"			""			\
+	"memory=low"			""			\
+	"age_extent_cache"		""			\
+	"errors=panic"			""			\
+	"errors=continue"		""			\
+	"errors=remount-ro"		""			\
+	"nat_bits"			""			\
+	"atgc,mode=lfs"			""			\
+	"ro,flush_merge"		""			\
+	"rw"				"ro"			\
+	"norecovery,ro"			""			\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	if [ "${options[$((i+1))]}" == "blkzone" ]; then
+		_test_mkfs "-m" >> $seqres.full
+		_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_test_unmount >> $seqres.full 2>&1
+	else
+		_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full
+		_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_scratch_unmount >> $seqres.full 2>&1
+	fi
+done
+
+status=0
+exit
tests/f2fs/015.out new file +225 -0
new file mode 100644
index 00000000..d7f4e62a
@@ -0,0 +1,225 @@
+QA output created by 015
+Option#0: background_gc=on : 
+0
+Option#2: background_gc=off : 
+0
+Option#4: background_gc=sync : 
+0
+Option#6: background_gc=on : blkzone
+0
+Option#8: background_gc=off : blkzone
+32
+Option#10: background_gc=sync : blkzone
+0
+Option#12: disable_roll_forward : 
+0
+Option#14: norecovery : 
+32
+Option#16: discard : 
+0
+Option#18: nodiscard : 
+0
+Option#20: no_heap : 
+0
+Option#22: heap : 
+0
+Option#24: user_xattr : 
+0
+Option#26: nouser_xattr : 
+0
+Option#28: acl : 
+0
+Option#30: noacl : 
+0
+Option#32: active_logs=2 : 
+0
+Option#34: active_logs=4 : 
+0
+Option#36: active_logs=6 : 
+0
+Option#38: disable_ext_identify : 
+0
+Option#40: inline_xattr : 
+0
+Option#42: noinline_xattr : 
+0
+Option#44: inline_xattr_size=400 : extra,flexible_inline_xattr
+32
+Option#46: inline_xattr_size=400 : 
+32
+Option#48: inline_data : 
+0
+Option#50: noinline_dentry : 
+0
+Option#52: inline_dentry : 
+0
+Option#54: noinline_dentry : 
+0
+Option#56: flush_merge : 
+0
+Option#58: noflush_merge : 
+0
+Option#60: barrier : 
+0
+Option#62: nobarrier : 
+0
+Option#64: fastboot : 
+0
+Option#66: extent_cache : 
+0
+Option#68: noextent_cache : 
+0
+Option#70: data_flush : 
+0
+Option#72: reserve_root=32768 : 
+0
+Option#74: resuid=1000 : 
+0
+Option#76: resgid=1000 : 
+0
+Option#78: fault_injection=100 : 
+0
+Option#80: fault_type=4095 : 
+0
+Option#82: mode=adaptive : 
+0
+Option#84: mode=lfs : 
+0
+Option#86: mode=fragment:segment : 
+0
+Option#88: mode=fragment:block : 
+0
+Option#90: mode=adaptive : blkzone
+32
+Option#92: mode=lfs : blkzone
+0
+Option#94: mode=fragment:segment : blkzone
+32
+Option#96: mode=fragment:block : blkzone
+32
+Option#98: usrquota : 
+0
+Option#100: grpquota : 
+0
+Option#102: prjquota : 
+32
+Option#104: usrjquota=ausrquota : 
+32
+Option#106: grpjquota=agrpquota : 
+32
+Option#108: prjjquota=aprjquota : 
+32
+Option#110: jqfmt=vfsold : 
+0
+Option#112: jqfmt=vfsv0 : 
+0
+Option#114: jqfmt=vfsv1 : 
+0
+Option#116: usrjquota= : 
+0
+Option#118: grpjquota= : 
+0
+Option#120: prjjquota= : 
+0
+Option#122: quota : 
+0
+Option#124: noquota : 
+0
+Option#126: alloc_mode=reuse : 
+0
+Option#128: alloc_mode=default : 
+0
+Option#130: fsync_mode=posix : 
+0
+Option#132: fsync_mode=strict : 
+0
+Option#134: fsync_mode=nobarrier : 
+0
+Option#136: test_dummy_encryption : 
+32
+Option#138: test_dummy_encryption=v1 : 
+32
+Option#140: test_dummy_encryption=v2 : 
+32
+Option#142: checkpoint=enable : 
+0
+Option#144: checkpoint=disable : 
+0
+Option#146: checkpoint=disable:32768 : 
+0
+Option#148: checkpoint=disable:50% : 
+0
+Option#150: checkpoint_merge : 
+0
+Option#152: nocheckpoint_merge : 
+0
+Option#154: compress_algorithm=lzo : 
+0
+Option#156: compress_algorithm=lzo : extra,compression
+0
+Option#158: compress_algorithm=lz4 : extra,compression
+0
+Option#160: compress_algorithm=zstd : extra,compression
+0
+Option#162: compress_algorithm=lzo-rle : extra,compression
+0
+Option#164: compress_algorithm=lz4:3 : extra,compression
+0
+Option#166: compress_algorithm=zstd:1 : extra,compression
+0
+Option#168: compress_log_size=8 : extra,compression
+0
+Option#170: compress_extension=so : extra,compression
+0
+Option#172: nocompress_extension=so : extra,compression
+0
+Option#174: nocompress_extension=* : extra,compression
+0
+Option#176: compress_extension=so,nocompress_extension=so : extra,compression
+0
+Option#178: compress_chksum : extra,compression
+0
+Option#180: compress_mode=fs : extra,compression
+0
+Option#182: compress_mode=user : extra,compression
+0
+Option#184: compress_cache : extra,compression
+0
+Option#186: inlinecrypt : 
+0
+Option#188: atgc : 
+0
+Option#190: discard_unit=block : 
+0
+Option#192: discard_unit=segment : 
+0
+Option#194: discard_unit=section : 
+0
+Option#196: discard_unit=block : blkzone
+0
+Option#198: discard_unit=segment : blkzone
+0
+Option#200: discard_unit=section : blkzone
+0
+Option#202: memory=normal : 
+0
+Option#204: memory=low : 
+0
+Option#206: age_extent_cache : 
+0
+Option#208: errors=panic : 
+0
+Option#210: errors=continue : 
+0
+Option#212: errors=remount-ro : 
+0
+Option#214: nat_bits : 
+0
+Option#216: atgc,mode=lfs : 
+32
+Option#218: ro,flush_merge : 
+32
+Option#220: rw : ro
+0
+Option#222: norecovery,ro : 
+0
Signature · 1 line
2.49.0
author
#4 lore raw
Quoted 69 lines · Zorro Lang
Quoted 68 lines · Chao Yu
Quoted 66 lines · Zorro Lang
Quoted 49 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---
v2:
- allow to check mount options w/ zoned device

 common/rc          |   3 +
 tests/f2fs/015     | 159 ++++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index f71cc8f0..94fdce7e 100644
@@ -844,6 +844,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +12 -0
new file mode 100755
index 00000000..746e79de
@@ -0,0 +1,159 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/015
+#
+# This testcase tries to check stability of mount result
+# w/ all f2fs supported mount option and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick
+_require_kernel_config CONFIG_F2FS_FS_XATTR

tests/f2fs/015 line 22

Quoted 10 lines
tests/f2fs/015 new file +10 -0
+_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
+_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
+
+_require_zoned_device "$TEST_DEV"

This requirement limit this test case only on zoned device... Maybe you can slip this test case to 2~3 cases, let some common mount options can be tested at first, some unimportant mount options can be tested in another case, then zoned device related mount options be tested in a seperated case ?

Quoted 5 lines
Quoted 2 lines

Good idea, do you want to uplift common mount option testcase to generic/ directory? or is it fine to leave it in f2fs/ now?

If you'd like to write a test case for mount(8) "COMMAND-LINE OPTIONS" and "FILESYSTEM-INDEPENDENT MOUNT OPTIONS", that's good too :)

I will take a look once I got free slot. :)

Quoted 5 lines

For this case I think it's fine to leave it in f2fs. Since new-mount APIs were brought in, more and more filesystems have their own xfs mount options test cases as what you are doing for f2fs now. These cases are $FSTYP specific test mostly.

Agreed, let me make it as f2fs testcase now.

Thanks,

Quoted 385 lines

Thanks,
Zorro

Quoted 380 lines

Thanks,

Quoted 376 lines

Thanks,
Zorro

Quoted 371 lines
tests/f2fs/015 new file +137 -0
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		""			\
+	"background_gc=off"		""			\
+	"background_gc=sync"		""			\
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"disable_roll_forward"		""			\
+	"norecovery"			""			\
+	"discard"			""			\
+	"nodiscard"			""			\
+	"no_heap"			""			\
+	"heap"				""			\
+	"user_xattr"			""			\
+	"nouser_xattr"			""			\
+	"acl"				""			\
+	"noacl"				""			\
+	"active_logs=2"			""			\
+	"active_logs=4"			""			\
+	"active_logs=6"			""			\
+	"disable_ext_identify"		""			\
+	"inline_xattr"			""			\
+	"noinline_xattr"		""			\
+	"inline_xattr_size=400"		"extra,flexible_inline_xattr"\
+	"inline_xattr_size=400"		""			\
+	"inline_data"			""			\
+	"noinline_dentry"		""			\
+	"inline_dentry"			""			\
+	"noinline_dentry"		""			\
+	"flush_merge"			""			\
+	"noflush_merge"			""			\
+	"barrier"			""			\
+	"nobarrier"			""			\
+	"fastboot"			""			\
+	"extent_cache"			""			\
+	"noextent_cache"		""			\
+	"data_flush"			""			\
+	"reserve_root=32768"		""			\
+	"resuid=1000"			""			\
+	"resgid=1000"			""			\
+	"fault_injection=100"		""			\
+	"fault_type=4095"		""			\
+	"mode=adaptive"			""			\
+	"mode=lfs"			""			\
+	"mode=fragment:segment"		""			\
+	"mode=fragment:block"		""			\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"usrquota"			""			\
+	"grpquota"			""			\
+	"prjquota"			""			\
+	"usrjquota=ausrquota"		""			\
+	"grpjquota=agrpquota"		""			\
+	"prjjquota=aprjquota"		""			\
+	"jqfmt=vfsold"			""			\
+	"jqfmt=vfsv0"			""			\
+	"jqfmt=vfsv1"			""			\
+	"usrjquota="			""			\
+	"grpjquota="			""			\
+	"prjjquota="			""			\
+	"quota"				""			\
+	"noquota"			""			\
+	"alloc_mode=reuse"		""			\
+	"alloc_mode=default"		""			\
+	"fsync_mode=posix"		""			\
+	"fsync_mode=strict"		""			\
+	"fsync_mode=nobarrier"		""			\
+	"test_dummy_encryption"		""			\
+	"test_dummy_encryption=v1"	""			\
+	"test_dummy_encryption=v2"	""			\
+	"checkpoint=enable"		""			\
+	"checkpoint=disable"		""			\
+	"checkpoint=disable:32768"	""			\
+	"checkpoint=disable:50%"	""			\
+	"checkpoint_merge"		""			\
+	"nocheckpoint_merge"		""			\
+	"compress_algorithm=lzo"	""			\
+	"compress_algorithm=lzo"	"extra,compression"	\
+	"compress_algorithm=lz4"	"extra,compression"	\
+	"compress_algorithm=zstd"	"extra,compression"	\
+	"compress_algorithm=lzo-rle"	"extra,compression"	\
+	"compress_algorithm=lz4:3"	"extra,compression"	\
+	"compress_algorithm=zstd:1"	"extra,compression"	\
+	"compress_log_size=8"		"extra,compression"	\
+	"compress_extension=so"		"extra,compression"	\
+	"nocompress_extension=so"	"extra,compression"	\
+	"nocompress_extension=*"	"extra,compression"	\
+	"compress_extension=so,nocompress_extension=so"		\
+					"extra,compression"	\
+	"compress_chksum"		"extra,compression"	\
+	"compress_mode=fs"		"extra,compression"	\
+	"compress_mode=user"		"extra,compression"	\
+	"compress_cache"		"extra,compression"	\
+	"inlinecrypt"			""			\
+	"atgc"				""			\
+	"discard_unit=block"		""			\
+	"discard_unit=segment"		""			\
+	"discard_unit=section"		""			\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+	"memory=normal"			""			\
+	"memory=low"			""			\
+	"age_extent_cache"		""			\
+	"errors=panic"			""			\
+	"errors=continue"		""			\
+	"errors=remount-ro"		""			\
+	"nat_bits"			""			\
+	"atgc,mode=lfs"			""			\
+	"ro,flush_merge"		""			\
+	"rw"				"ro"			\
+	"norecovery,ro"			""			\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	if [ "${options[$((i+1))]}" == "blkzone" ]; then
+		_test_mkfs "-m" >> $seqres.full
+		_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_test_unmount >> $seqres.full 2>&1
+	else
+		_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full
+		_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+		echo $?
+		_scratch_unmount >> $seqres.full 2>&1
+	fi
+done
+
+status=0
+exit
tests/f2fs/015.out new file +225 -0
new file mode 100644
index 00000000..d7f4e62a
@@ -0,0 +1,225 @@
+QA output created by 015
+Option#0: background_gc=on : 
+0
+Option#2: background_gc=off : 
+0
+Option#4: background_gc=sync : 
+0
+Option#6: background_gc=on : blkzone
+0
+Option#8: background_gc=off : blkzone
+32
+Option#10: background_gc=sync : blkzone
+0
+Option#12: disable_roll_forward : 
+0
+Option#14: norecovery : 
+32
+Option#16: discard : 
+0
+Option#18: nodiscard : 
+0
+Option#20: no_heap : 
+0
+Option#22: heap : 
+0
+Option#24: user_xattr : 
+0
+Option#26: nouser_xattr : 
+0
+Option#28: acl : 
+0
+Option#30: noacl : 
+0
+Option#32: active_logs=2 : 
+0
+Option#34: active_logs=4 : 
+0
+Option#36: active_logs=6 : 
+0
+Option#38: disable_ext_identify : 
+0
+Option#40: inline_xattr : 
+0
+Option#42: noinline_xattr : 
+0
+Option#44: inline_xattr_size=400 : extra,flexible_inline_xattr
+32
+Option#46: inline_xattr_size=400 : 
+32
+Option#48: inline_data : 
+0
+Option#50: noinline_dentry : 
+0
+Option#52: inline_dentry : 
+0
+Option#54: noinline_dentry : 
+0
+Option#56: flush_merge : 
+0
+Option#58: noflush_merge : 
+0
+Option#60: barrier : 
+0
+Option#62: nobarrier : 
+0
+Option#64: fastboot : 
+0
+Option#66: extent_cache : 
+0
+Option#68: noextent_cache : 
+0
+Option#70: data_flush : 
+0
+Option#72: reserve_root=32768 : 
+0
+Option#74: resuid=1000 : 
+0
+Option#76: resgid=1000 : 
+0
+Option#78: fault_injection=100 : 
+0
+Option#80: fault_type=4095 : 
+0
+Option#82: mode=adaptive : 
+0
+Option#84: mode=lfs : 
+0
+Option#86: mode=fragment:segment : 
+0
+Option#88: mode=fragment:block : 
+0
+Option#90: mode=adaptive : blkzone
+32
+Option#92: mode=lfs : blkzone
+0
+Option#94: mode=fragment:segment : blkzone
+32
+Option#96: mode=fragment:block : blkzone
+32
+Option#98: usrquota : 
+0
+Option#100: grpquota : 
+0
+Option#102: prjquota : 
+32
+Option#104: usrjquota=ausrquota : 
+32
+Option#106: grpjquota=agrpquota : 
+32
+Option#108: prjjquota=aprjquota : 
+32
+Option#110: jqfmt=vfsold : 
+0
+Option#112: jqfmt=vfsv0 : 
+0
+Option#114: jqfmt=vfsv1 : 
+0
+Option#116: usrjquota= : 
+0
+Option#118: grpjquota= : 
+0
+Option#120: prjjquota= : 
+0
+Option#122: quota : 
+0
+Option#124: noquota : 
+0
+Option#126: alloc_mode=reuse : 
+0
+Option#128: alloc_mode=default : 
+0
+Option#130: fsync_mode=posix : 
+0
+Option#132: fsync_mode=strict : 
+0
+Option#134: fsync_mode=nobarrier : 
+0
+Option#136: test_dummy_encryption : 
+32
+Option#138: test_dummy_encryption=v1 : 
+32
+Option#140: test_dummy_encryption=v2 : 
+32
+Option#142: checkpoint=enable : 
+0
+Option#144: checkpoint=disable : 
+0
+Option#146: checkpoint=disable:32768 : 
+0
+Option#148: checkpoint=disable:50% : 
+0
+Option#150: checkpoint_merge : 
+0
+Option#152: nocheckpoint_merge : 
+0
+Option#154: compress_algorithm=lzo : 
+0
+Option#156: compress_algorithm=lzo : extra,compression
+0
+Option#158: compress_algorithm=lz4 : extra,compression
+0
+Option#160: compress_algorithm=zstd : extra,compression
+0
+Option#162: compress_algorithm=lzo-rle : extra,compression
+0
+Option#164: compress_algorithm=lz4:3 : extra,compression
+0
+Option#166: compress_algorithm=zstd:1 : extra,compression
+0
+Option#168: compress_log_size=8 : extra,compression
+0
+Option#170: compress_extension=so : extra,compression
+0
+Option#172: nocompress_extension=so : extra,compression
+0
+Option#174: nocompress_extension=* : extra,compression
+0
+Option#176: compress_extension=so,nocompress_extension=so : extra,compression
+0
+Option#178: compress_chksum : extra,compression
+0
+Option#180: compress_mode=fs : extra,compression
+0
+Option#182: compress_mode=user : extra,compression
+0
+Option#184: compress_cache : extra,compression
+0
+Option#186: inlinecrypt : 
+0
+Option#188: atgc : 
+0
+Option#190: discard_unit=block : 
+0
+Option#192: discard_unit=segment : 
+0
+Option#194: discard_unit=section : 
+0
+Option#196: discard_unit=block : blkzone
+0
+Option#198: discard_unit=segment : blkzone
+0
+Option#200: discard_unit=section : blkzone
+0
+Option#202: memory=normal : 
+0
+Option#204: memory=low : 
+0
+Option#206: age_extent_cache : 
+0
+Option#208: errors=panic : 
+0
+Option#210: errors=continue : 
+0
+Option#212: errors=remount-ro : 
+0
+Option#214: nat_bits : 
+0
+Option#216: atgc,mode=lfs : 
+32
+Option#218: ro,flush_merge : 
+32
+Option#220: rw : ro
+0
+Option#222: norecovery,ro : 
+0
Signature · 1 line
2.49.0