perf: make perf report -D print sampled CPU
PATCH 1/1 perf: make perf report -D print sampled CPU
It is useful to know on which CPU a sample was captured on. The information is captured with perf record -R but it was not printed out by perf report -D. This patch adds this.
When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured).
tools/perf/builtin-report.c +3 -2
@@ -157,8 +157,9 @@ static int process_sample_event(event_t *event, struct perf_session *session)event__parse_sample (event, session->sample_type, &data); -dump_printf ("(IP, %d): %d/%d: %#Lx period: %Ld\n" , event->header.misc, - data.pid, data.tid, data.ip, data.period); +dump_printf ("(IP, %d): %d/%d: %#Lx period: %Ld cpu:%d\n" , + event->header.misc, data.pid, data.tid, data.ip, + data.period, data.cpu);if (session->sample_type &PERF_SAMPLE_CALLCHAIN ) {unsigned int i;
tools/perf/util/event.c +2 -1
@@ -770,7 +770,8 @@ int event__parse_sample(event_t *event, u64 type, struct sample_data *data)u32 *p = (u32 *)array; data->cpu = *p; array++; - } + }else + data->cpu =-1 ;if (type &PERF_SAMPLE_PERIOD ) { data->period = *array;
Em Fri, May 28, 2010 at 12:08:01PM +0200, Stephane Eranian escreveu:
Quoted 8 lines
It is useful to know on which CPU a sample was captured on. The information is captured with perf record -R but it was not printed out by perf report -D. This patch adds this.
When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured).
Signed-off-by Stephane Eranian <[email protected]>
It conflicts with Arun's patch for sorting by CPU that I started playing with yesterday, but in a good way, i.e. printing the CPU at that dump_printf spot was one of the changs I made in Arun's patch as well.
[root@emilia linux-2.6-tip]# perf report -D | grep SAMPLE | head -60x10240 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252: 0xffffffff81253362 period: 1894446 0x10268 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252: 0xffffffff81253338 period: 1894446 0x10290 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252: 0xffffffff8125300d period: 1905103 0x102b8 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 0 0/0: 0xffffffff8109117d period: 1838260 0x102e0 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 0 293/293: 0xffffffff8101ace6 period: 352697 0x10308 [0x28]: PERF_RECORD_SAMPLE(IP, 1): 0 1763/1763: 0xffffffff8101ace6 period: 352697 [root@emilia linux-2.6-tip]#
I added it just before the pid/tid but prefixing it with "cpu: " is as good as doing it that way.
I'm applying both patches after some tests,
Thanks!
- Arnaldo
Quoted 5 lines · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 12:08:01PM +0200, Stephane Eranian escreveu:
Quoted 4 lines
It is useful to know on which CPU a sample was captured on. The information is captured with perf record -R but it was not printed out by perf report -D. This patch adds this.
Quoted 9 lines
Quoted 4 lines
When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured).
Signed-off-by Stephane Eranian <[email protected]>It conflicts with Arun's patch for sorting by CPU that I started playing with yesterday, but in a good way, i.e. printing the CPU at that
dump_printfspot was one of the changs I made in Arun's patch as well.
Yes, I realized that afterwards.
Quoted 9 lines
[root@emilia linux-2.6-tip]# perf report -D | grep SAMPLE | head -6
0x10240[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253362period: 18944460x10268[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253338period: 18944460x10290[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff8125300dperiod: 19051030x102b8[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 0/0:0xffffffff8109117dperiod: 18382600x102e0[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 293/293:0xffffffff8101ace6period: 3526970x10308[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 1763/1763:0xffffffff8101ace6period: 352697 [root@emilia linux-2.6-tip]#
Quoted 3 lines
I added it just before the pid/tid but prefixing it with "cpu: " is as good as doing it that way.
Fine. I think there needs to be some documenation explaining the structure of the line here. I had to dig into the code to understand it.
Quoted 2 lines
I'm applying both patches after some tests,
Thanks.
Em Fri, May 28, 2010 at 03:03:15PM +0200, Stephane Eranian escreveu:
Quoted 21 lines
Quoted 7 lines · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 12:08:01PM +0200, Stephane Eranian escreveu:
Quoted 2 lines
When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured).
It conflicts with Arun's patch for sorting by CPU that I started playing with yesterday, but in a good way, i.e. printing the CPU at that
dump_printfspot was one of the changs I made in Arun's patch as well.Yes, I realized that afterwards.
Quoted 8 lines
[root@emilia linux-2.6-tip]# perf report -D | grep SAMPLE | head -6
0x10240[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253362period: 18944460x10268[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253338period: 18944460x10290[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff8125300dperiod: 19051030x102b8[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 0/0:0xffffffff8109117dperiod: 18382600x102e0[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 293/293:0xffffffff8101ace6period: 3526970x10308[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 1763/1763:0xffffffff8101ace6period: 352697 [root@emilia linux-2.6-tip]#
Quoted 5 lines
Quoted 2 lines
I added it just before the pid/tid but prefixing it with "cpu: " is as good as doing it that way.
Fine. I think there needs to be some documenation explaining the structure of the line here. I had to dig into the code to understand it.
Right, this so far is as ad-hoc as it can be :-)
One idea that is in my TODO list is to generate some XML format people say that oprofile produces and there is also some other format that a valgrind tool uses that should be supported.
I also plan to have it in a spreadsheet TUI widget, allowing lots of navigation gimmicks to help in debugging, like a popup that offers the list of mmaps for the thread where the sample below the cursor happened, etc.
- Arnaldo
Quoted 25 lines · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 03:03:15PM +0200, Stephane Eranian escreveu:
Quoted 23 lines
Quoted 7 lines · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 12:08:01PM +0200, Stephane Eranian escreveu:
Quoted 2 lines
When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured).
It conflicts with Arun's patch for sorting by CPU that I started playing with yesterday, but in a good way, i.e. printing the CPU at that
dump_printfspot was one of the changs I made in Arun's patch as well.Yes, I realized that afterwards.
Quoted 11 lines
[root@emilia linux-2.6-tip]# perf report -D | grep SAMPLE | head -6
0x10240[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253362period: 18944460x10268[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff81253338period: 18944460x10290[0x28]:PERF_RECORD_SAMPLE(IP, 1): 2 17252/17252:0xffffffff8125300dperiod: 19051030x102b8[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 0/0:0xffffffff8109117dperiod: 18382600x102e0[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 293/293:0xffffffff8101ace6period: 3526970x10308[0x28]:PERF_RECORD_SAMPLE(IP, 1): 0 1763/1763:0xffffffff8101ace6period: 352697 [root@emilia linux-2.6-tip]#I added it just before the pid/tid but prefixing it with "cpu: " is as good as doing it that way.
Quoted 9 lines
Quoted 2 lines
Fine. I think there needs to be some documenation explaining the structure of the line here. I had to dig into the code to understand it.
Right, this so far is as ad-hoc as it can be :-)
One idea that is in my TODO list is to generate some XML format people say that oprofile produces and there is also some other format that a valgrind tool uses that should be supported.
I think for a lot of people what matter is that the format be easily parseable by Python/Perl scripts. XML may be fine too.
Quoted 4 lines
I also plan to have it in a spreadsheet TUI widget, allowing lots of navigation gimmicks to help in debugging, like a popup that offers the list of mmaps for the thread where the sample below the cursor happened, etc.
You may get tons of data. Not sure you could manage interactively.
Em Fri, May 28, 2010 at 03:44:31PM +0200, Stephane Eranian escreveu:
Quoted 9 lines
Quoted 7 lines · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 03:03:15PM +0200, Stephane Eranian escreveu:
Quoted 5 lines
Quoted 1 line · Arnaldo Carvalho de Melo
Em Fri, May 28, 2010 at 12:08:01PM +0200, Stephane Eranian escreveu:
Fine. I think there needs to be some documenation explaining the structure of the line here. I had to dig into the code to understand it.
Quoted 8 lines
Quoted 5 lines
Right, this so far is as ad-hoc as it can be :-)
One idea that is in my TODO list is to generate some XML format people say that oprofile produces and there is also some other format that a valgrind tool uses that should be supported.
I think for a lot of people what matter is that the format be easily parseable by Python/Perl scripts. XML may be fine too.
Agreed, I mentioned the existing formats because they may be good enough and would allow us to take advantage of existing tools that process them.
Quoted 6 lines
Quoted 4 lines
I also plan to have it in a spreadsheet TUI widget, allowing lots of navigation gimmicks to help in debugging, like a popup that offers the list of mmaps for the thread where the sample below the cursor happened, etc.
You may get tons of data. Not sure you could manage interactively.
Right, it wouldn't support all cases, but I'm working on new TUI widgets that try hard not to create several layers of data structures to browse the perf.data file, i.e. filtering shouldn't traverse all the entries, just set variables that will be inspected when we move to a different page, etc.
- Arnaldo