Bluetooth: btrtl: Add the support for RTL8761CUV
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 Bluetooth: btrtl: Add the support for RTL8761CUV
From: Max Chou <[email protected]>
Add the support for RTL8761CUV BT controller on USB interface.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller S: SerialNumber=10000 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
--- drivers/bluetooth/btrtl.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/bluetooth/btrtl.c +11 -0
@@ -72,6 +72,7 @@ enum btrtl_chip_id {CHIP_ID_8851B =36 ,CHIP_ID_8922A =44 ,CHIP_ID_8852BT =47 , + CHIP_ID_8761C = 51, }; struct id_table {
@@ -230,6 +231,14 @@ static const struct id_table ic_id_table[] = { .cfg_name = "rtl_bt/rtl8761bu_config", .hw_info = "rtl8761bu" }, +/* 8761CU */ + { IC_INFO(RTL_ROM_LMP_8761A, 0x0e, 0xc, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .fw_name = "rtl_bt/rtl8761cu_fw", + .cfg_name = "rtl_bt/rtl8761cu_config", + .hw_info = "rtl8761cu" }, + /* 8822C with UART interface */ { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART), .config_needed = true,
@@ -668,6 +677,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ { RTL_ROM_LMP_8922A, 44 }, /* 8922A */ { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */ + { RTL_ROM_LMP_8761A, 51 }, /* 8761C */ };if (btrtl_dev->fw_len <=8 )
@@ -1301,6 +1311,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)case CHIP_ID_8851B :case CHIP_ID_8922A :case CHIP_ID_8852BT : +case CHIP_ID_8761C :hci_set_quirk (hdev,HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED );/* RTL8852C needs to transmit mSBC data continuously without @@ -1520,6 +1531,8 @@ MODULE_FIRMWARE("rtl_bt/rtl8761b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761cu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821c_fw.bin");
--
2.43.0
This is an automated email and please do not reply to this email.
Dear Submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.
----- Output -----
error: patch failed: drivers/bluetooth/btrtl.c:1301
error: drivers/bluetooth/btrtl.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Please resolve the issue and submit the patches again.
---
Regards,
Linux Bluetooth