Skip to contentSkip to conversation

reset: zynqmp: move reset_assert() into firmware driver

PATCH Applied Akshay Belsare 2 participants 4 messages Aug 20 – Sep 2

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover reset: zynqmp: move reset_assert() into firmware driver

The ZynqMP reset assertion helper currently resides in drivers/reset/reset-zynqmp.c, even though the driver is built only when CONFIG_ZYNQMP_FIRMWARE is enabled and the implementation is entirely firmware-backed. This series moves zynqmp_pm_reset_assert() into firmware-zynqmp.c, alongside the rest of the PM firmware interfaces.
With the helper residing in the firmware driver, reset_cpu() is updated to invoke zynqmp_pm_reset_assert() directly rather than issuing the PM request itself or relying on the reset uclass. This is important for boot flows where reset_cpu() may be called before the reset framework is available.

Akshay Belsare (2):
reset: zynqmp: move reset assert helper into firmware driver
board: xilinx: zynqmp: use reset assert helper in reset_cpu()

 board/xilinx/zynqmp/zynqmp.c       | 7 +++----
 drivers/firmware/firmware-zynqmp.c | 7 +++++++
 drivers/reset/reset-zynqmp.c       | 7 -------
 include/zynqmp_firmware.h          | 2 ++
 4 files changed, 12 insertions(+), 11 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/2 reset: zynqmp: move reset assert helper into firmware driver

zynqmp_pm_reset_assert() is currently implemented in the reset driver, requiring reset-zynqmp.c to invoke the PM firmware interface directly.
Move the helper into firmware-zynqmp.c and expose it through the firmware layer instead. Since reset assertion has no non-firmware implementation, this keeps the firmware-specific logic localized to the firmware driver and simplifies the reset driver.

---
 drivers/firmware/firmware-zynqmp.c | 7 +++++++
 drivers/reset/reset-zynqmp.c       | 7 -------
 include/zynqmp_firmware.h          | 2 ++
 3 files changed, 9 insertions(+), 7 deletions(-)
drivers/firmware/firmware-zynqmp.c +7 -0
index fae66ccb3d8..9f5556751be 100644
@@ -175,6 +175,13 @@ unsigned int zynqmp_firmware_version(void)
 	return pm_api_version;
 };
 
+int zynqmp_pm_reset_assert(const u32 reset,
+			   const enum zynqmp_pm_reset_action assert_flag)
+{
+	return xilinx_pm_request(PM_RESET_ASSERT, reset, assert_flag, 0, 0,
+				 0, 0, NULL);
+}
+
 #if defined(CONFIG_ARCH_VERSAL2)
 /*
  * Poll the M-PHY TX/RX config-ready status until it settles or @timeout_us
drivers/reset/reset-zynqmp.c +0 -7
index 2b58f3a75b4..eb2f6d0bdfe 100644
@@ -18,13 +18,6 @@ struct zynqmp_reset_priv {
 	u32 nr_reset;
 };
 
-static int zynqmp_pm_reset_assert(const u32 reset,
-				  const enum zynqmp_pm_reset_action assert_flag)
-{
-	return xilinx_pm_request(PM_RESET_ASSERT, reset, assert_flag, 0, 0,
-				 0, 0, NULL);
-}
-
 static int zynqmp_reset_assert(struct reset_ctl *rst)
 {
 	struct zynqmp_reset_priv *priv = dev_get_priv(rst->dev);
include/zynqmp_firmware.h +2 -0
index f753a67ac27..86f3ccf8932 100644
@@ -463,6 +463,8 @@ int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config,
 int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id);
 int zynqmp_mmio_read(const u32 address, u32 *value);
 int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value);
+int zynqmp_pm_reset_assert(const u32 reset,
+			   const enum zynqmp_pm_reset_action assert_flag);
 int zynqmp_pm_feature(const u32 api_id);
 u32 zynqmp_pm_get_bootmode_reg(void);
 u32 zynqmp_pm_get_pmc_multi_boot_reg(void);
Signature · 1 line
2.34.1
#2 lore raw

PATCH 2/2 board: xilinx: zynqmp: use reset assert helper in reset_cpu()

In reply to Akshay Belsare

reset_cpu() currently invokes xilinx_pm_request(PM_RESET_ASSERT, ...) directly to assert a system reset. Switch it to use zynqmp_pm_reset_assert(), matching the approach used by reset-zynqmp.c and centralizing the firmware interaction behind a common helper.

Keep the IS_ENABLED(CONFIG_ZYNQMP_FIRMWARE) early return unchanged so the reset path continues to compile out when firmware support is not enabled.

---
 board/xilinx/zynqmp/zynqmp.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
board/xilinx/zynqmp/zynqmp.c +3 -4
index 5d13881f3ec..c7464b493c5 100644
@@ -288,13 +288,12 @@ void reset_cpu(void)
 		return;
 	}
 
-	/* In case of !CONFIG_ZYNQMP_FIRMWARE the call to 'xilinx_pm_request()'
+	/* In case of !CONFIG_ZYNQMP_FIRMWARE the call to 'zynqmp_pm_reset_assert()'
 	 * will be removed by the compiler due to the early return.
-	 * If CONFIG_ZYNQMP_FIRMWARE is defined in SPL 'xilinx_pm_request()'
+	 * If CONFIG_ZYNQMP_FIRMWARE is defined in SPL 'zynqmp_pm_reset_assert()'
 	 * will send command over IPI and requires pmufw to be present.
 	 */
-	xilinx_pm_request(PM_RESET_ASSERT, ZYNQMP_PM_RESET_SOFT,
-			  PM_RESET_ACTION_ASSERT, 0, 0, 0, 0, NULL);
+	zynqmp_pm_reset_assert(ZYNQMP_PM_RESET_SOFT, PM_RESET_ACTION_ASSERT);
 }
 #endif
 
Signature · 1 line
2.34.1
Applied
#3 lore raw
In reply to Akshay Belsare
Quoted 16 lines · Akshay Belsare

The ZynqMP reset assertion helper currently resides in drivers/reset/reset-zynqmp.c, even though the driver is built only when CONFIG_ZYNQMP_FIRMWARE is enabled and the implementation is entirely firmware-backed. This series moves zynqmp_pm_reset_assert() into firmware-zynqmp.c, alongside the rest of the PM firmware interfaces.

With the helper residing in the firmware driver, reset_cpu() is updated to invoke zynqmp_pm_reset_assert() directly rather than issuing the PM request itself or relying on the reset uclass. This is important for boot flows where reset_cpu() may be called before the reset framework is available.

Akshay Belsare (2):
reset: zynqmp: move reset assert helper into firmware driver
board: xilinx: zynqmp: use reset assert helper in reset_cpu()

Quoted 6 lines
  board/xilinx/zynqmp/zynqmp.c       | 7 +++----
  drivers/firmware/firmware-zynqmp.c | 7 +++++++
  drivers/reset/reset-zynqmp.c       | 7 -------
  include/zynqmp_firmware.h          | 2 ++
  4 files changed, 12 insertions(+), 11 deletions(-)

Applied.
M

Signature · 6 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs