Skip to contentSkip to conversation

kms_atomic_transition: Split out modeset tests on internal panels

PATCH Superseded Imre Deak 4 participants 12 messages Nov 2, 2017 – Nov 9, 2017

lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/1 kms_atomic_transition: Split out modeset tests on internal panels

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in the CI fast-feedback test split out the testing of internal panels from the plane modeset subtests. Create fast and slow versions of these new subtests. In the fast one only combinations with all enabled, all planes disabled or a single plane enable are tested. In the slow one all plane combinations are tested.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103334

Cc Maarten Lankhorst <[email protected]>
---
 tests/kms_atomic_transition.c | 64 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 60 insertions(+), 4 deletions(-)
tests/kms_atomic_transition.c +60 -4
index 4c295125..c27e48e1 100644
@@ -189,6 +189,7 @@ enum transition_type {
 	TRANSITION_PLANES,
 	TRANSITION_AFTER_FREE,
 	TRANSITION_MODESET,
+	TRANSITION_MODESET_PLANES_FAST,
 	TRANSITION_MODESET_DISABLE,
 };
 
@@ -528,6 +529,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 	}
 
 	for (i = 0; i < iter_max; i++) {
+		if (type == TRANSITION_MODESET_PLANES_FAST &&
+		    hweight32(i) != 1 && hweight32(i) != pipe_obj->n_planes)
+			continue;
+
 		igt_output_set_pipe(output, pipe);
 
 		wm_setup_plane(display, pipe, i, parms, fencing);
@@ -547,16 +552,20 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 
 			/* i -> i+1 will be done when i increases, can be skipped here */
 			for (j = iter_max - 1; j > i + 1; j--) {
+				if (type == TRANSITION_MODESET_PLANES_FAST &&
+				    hweight32(j) != 1 && hweight32(j) != pipe_obj->n_planes)
+					continue;
+
 				wm_setup_plane(display, pipe, j, parms, fencing);
 
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, &override_mode);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing);
 				wait_for_transition(display, pipe, nonblocking, fencing);
 
 				wm_setup_plane(display, pipe, i, parms, fencing);
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, NULL);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) i, fencing);
@@ -864,6 +873,19 @@ static void run_modeset_transition(igt_display_t *display, int requested_outputs
 	run_modeset_tests(display, requested_outputs, nonblocking, fencing);
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
 igt_main
 {
 	igt_display_t display;
@@ -914,12 +936,46 @@ igt_main
 			run_transition_test(&display, pipe, output, TRANSITION_AFTER_FREE, true, true);
 
 	igt_subtest("plane-all-modeset-transition")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
 
 	igt_subtest("plane-all-modeset-transition-fencing")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels-fast")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_PLANES_FAST, false, false);
+		}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels-fast")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_PLANES_FAST, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels-slow")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels-slow")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
 
 	igt_subtest("plane-toggle-modeset-transition")
 		for_each_pipe_with_valid_output(&display, pipe, output)
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✓ Fi.CI.BAT: success for kms_atomic_transition: Split out modeset tests on internal panels

== Series Details ==

== Series Details ==

Series: kms_atomic_transition: Split out modeset tests on internal panels
URL : https://patchwork.freedesktop.org/series/33052/
State : success

== Summary ==

IGT patchset tested on top of latest successful build 6d16875736b9fb1ebf4bf3dc5a941f9e431d58e0 lib/igt_debugfs: Remove support for legacy CRC api.

with latest DRM-Tip kernel build CI_DRM_3309
fca2506bc5d4 drm-tip: 2017y-11m-02d-13h-10m-58s UTC integration manifest

Testlist changes:
+igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels-fast +igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels-slow +igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels-fast +igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels-slow

Test chamelium:

        Subgroup dp-crc-fast:
                fail       -> PASS       (fi-kbl-7500u) fdo#102514
Test kms_cursor_legacy:
        Subgroup basic-flip-before-cursor-varying-size:
                skip       -> PASS       (fi-hsw-4770r)
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-a-frame-sequence:
                dmesg-warn -> PASS       (fi-skl-6700k) fdo#103546 +1

fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#103546 https://bugs.freedesktop.org/show_bug.cgi?id=103546

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:446s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:461s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:380s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:554s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:277s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:508s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:504s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:513s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:491s
fi-cfl-s         total:289  pass:253  dwarn:4   dfail:0   fail:0   skip:32  time:551s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:635s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:431s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:263s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:594s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:497s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:435s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:429s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:430s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:499s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:464s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:488s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:575s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:481s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:585s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:574s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:453s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:601s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:649s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:521s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:499s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:464s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:577s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:434s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_468/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

✗ Fi.CI.IGT: warning for kms_atomic_transition: Split out modeset tests on internal panels

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: kms_atomic_transition: Split out modeset tests on internal panels
URL : https://patchwork.freedesktop.org/series/33052/
State : warning

== Summary ==

Test kms_setmode:

        Subgroup basic:
                pass       -> FAIL       (shard-hsw) fdo#99912
Test kms_atomic_transition:
        Subgroup 1x-modeset-transitions-nonblocking:
                pass       -> DMESG-WARN (shard-hsw)
Test drv_module_reload:
        Subgroup basic-reload:
                dmesg-warn -> PASS       (shard-hsw) fdo#102707
Test kms_busy:
        Subgroup extended-modeset-hang-oldfb-with-reset-render-A:
                dmesg-warn -> PASS       (shard-hsw)

fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707

shard-hsw total:2543 pass:1436 dwarn:1 dfail:0 fail:9 skip:1097 time:9266s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_468/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
In reply to Imre Deak

Quoting Imre Deak (2017-11-02 13:38:09)

Quoted 9 lines

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in the CI fast-feedback test split out the testing of internal panels from the plane modeset subtests. Create fast and slow versions of these new subtests. In the fast one only combinations with all enabled, all planes disabled or a single plane enable are tested. In the slow one all plane combinations are tested.

tests/kms_atomic_transition.c run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output · line 533

Quoted 5 lines
tests/kms_atomic_transition.c +2 -0
@@ -528,6 +529,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
        }
 
        for (i = 0; i < iter_max; i++) {
+               if (type == TRANSITION_MODESET_PLANES_FAST &&
+                   hweight32(i) != 1 && hweight32(i) != pipe_obj->n_planes)

So reduce number of iterations to a power of two, and only operate if pipe_obj->n_planes == 1

Why repeat hweight32(i) when you've already proved it is 1? That reads very fishily.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#4 lore raw
Quoted 19 lines · Chris Wilson

Quoting Imre Deak (2017-11-02 13:38:09)

Quoted 9 lines

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in the CI fast-feedback test split out the testing of internal panels from the plane modeset subtests. Create fast and slow versions of these new subtests. In the fast one only combinations with all enabled, all planes disabled or a single plane enable are tested. In the slow one all plane combinations are tested.

tests/kms_atomic_transition.c run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output · line 533

Quoted 5 lines
tests/kms_atomic_transition.c +2 -0
@@ -528,6 +529,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
        }
 
        for (i = 0; i < iter_max; i++) {
+               if (type == TRANSITION_MODESET_PLANES_FAST &&
+                   hweight32(i) != 1 && hweight32(i) != pipe_obj->n_planes)

So reduce number of iterations to a power of two, and only operate if pipe_obj->n_planes == 1

Quoted 2 lines

Why repeat hweight32(i) when you've already proved it is 1? That reads very fishily.

I wanted to test only combinations where either only one plane is enabled or all planes are enabled. How about adding

int n_enabled_planes = hweight32(i);

and checking that instead to make things clearer?

--Imre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#5 lore raw

PATCH v2 1/1 kms_atomic_transition: Split out modeset tests on internal panels

In reply to Imre Deak

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in CI split out the testing of internal panels from the plane modeset subtests and test only a reduced number of plane combinations on these:
where only a single plane is enabled or all planes are enabled.

v2:
- Add code comment explaining the need for the separate internal-panels subtests.
- Calculate the number of enabled planes only once. (Chris)
- Disable the slow internal-panels subtests testing all combinations. (Petri)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103334

Cc Maarten Lankhorst <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Chris Wilson <[email protected]>
---
 tests/kms_atomic_transition.c | 61 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 57 insertions(+), 4 deletions(-)
tests/kms_atomic_transition.c +57 -4
index 4c295125..c57a9356 100644
@@ -189,6 +189,7 @@ enum transition_type {
 	TRANSITION_PLANES,
 	TRANSITION_AFTER_FREE,
 	TRANSITION_MODESET,
+	TRANSITION_MODESET_FAST,
 	TRANSITION_MODESET_DISABLE,
 };
 
@@ -528,6 +529,13 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 	}
 
 	for (i = 0; i < iter_max; i++) {
+		int n_enable_planes = hweight32(i);
+
+		if (type == TRANSITION_MODESET_FAST &&
+		    n_enable_planes != 1 &&
+		    n_enable_planes != pipe_obj->n_planes)
+			continue;
+
 		igt_output_set_pipe(output, pipe);
 
 		wm_setup_plane(display, pipe, i, parms, fencing);
@@ -547,16 +555,23 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 
 			/* i -> i+1 will be done when i increases, can be skipped here */
 			for (j = iter_max - 1; j > i + 1; j--) {
+				n_enable_planes = hweight32(j);
+
+				if (type == TRANSITION_MODESET_FAST &&
+				    n_enable_planes != 1 &&
+				    n_enable_planes != pipe_obj->n_planes)
+					continue;
+
 				wm_setup_plane(display, pipe, j, parms, fencing);
 
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, &override_mode);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing);
 				wait_for_transition(display, pipe, nonblocking, fencing);
 
 				wm_setup_plane(display, pipe, i, parms, fencing);
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, NULL);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) i, fencing);
@@ -864,6 +879,19 @@ static void run_modeset_transition(igt_display_t *display, int requested_outputs
 	run_modeset_tests(display, requested_outputs, nonblocking, fencing);
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
 igt_main
 {
 	igt_display_t display;
@@ -913,13 +941,38 @@ igt_main
 		for_each_pipe_with_valid_output(&display, pipe, output)
 			run_transition_test(&display, pipe, output, TRANSITION_AFTER_FREE, true, true);
 
+	/*
+	 * Test modeset cases on internal panels separately with a reduced
+	 * number of combinations, to avoid long runtimes due to modesets on
+	 * panels with long power cycle delays.
+	 */
 	igt_subtest("plane-all-modeset-transition")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
 
 	igt_subtest("plane-all-modeset-transition-fencing")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, false);
+		}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels")
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, true);
+		}
 
 	igt_subtest("plane-toggle-modeset-transition")
 		for_each_pipe_with_valid_output(&display, pipe, output)
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#6 lore raw

PATCH v3 1/1 kms_atomic_transition: Split out modeset tests on internal panels

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in CI split out the testing of internal panels from the plane modeset subtests and test only a reduced number of plane combinations on these:
where only a single plane is enabled, all planes are disabled or all planes are enabled.

v2:
- Add code comment explaining the need for the separate internal-panels subtests.
- Calculate the number of enabled planes only once. (Chris)
- Disable the slow internal-panels subtests testing all combinations. (Petri)

v3: (Maarten)
- Skip the internal-panels subtests if no internal panels are found.
- Also test transitions with all planes disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103334

Cc Maarten Lankhorst <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Chris Wilson <[email protected]>
---
 tests/kms_atomic_transition.c | 71 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 4 deletions(-)
tests/kms_atomic_transition.c +67 -4
index 4c295125..54581ed7 100644
@@ -189,6 +189,7 @@ enum transition_type {
 	TRANSITION_PLANES,
 	TRANSITION_AFTER_FREE,
 	TRANSITION_MODESET,
+	TRANSITION_MODESET_FAST,
 	TRANSITION_MODESET_DISABLE,
 };
 
@@ -528,6 +529,13 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 	}
 
 	for (i = 0; i < iter_max; i++) {
+		int n_enable_planes = hweight32(i);
+
+		if (type == TRANSITION_MODESET_FAST &&
+		    n_enable_planes > 1 &&
+		    n_enable_planes < pipe_obj->n_planes)
+			continue;
+
 		igt_output_set_pipe(output, pipe);
 
 		wm_setup_plane(display, pipe, i, parms, fencing);
@@ -547,16 +555,23 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 
 			/* i -> i+1 will be done when i increases, can be skipped here */
 			for (j = iter_max - 1; j > i + 1; j--) {
+				n_enable_planes = hweight32(j);
+
+				if (type == TRANSITION_MODESET_FAST &&
+				    n_enable_planes > 1 &&
+				    n_enable_planes < pipe_obj->n_planes)
+					continue;
+
 				wm_setup_plane(display, pipe, j, parms, fencing);
 
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, &override_mode);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing);
 				wait_for_transition(display, pipe, nonblocking, fencing);
 
 				wm_setup_plane(display, pipe, i, parms, fencing);
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, NULL);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) i, fencing);
@@ -864,6 +879,19 @@ static void run_modeset_transition(igt_display_t *display, int requested_outputs
 	run_modeset_tests(display, requested_outputs, nonblocking, fencing);
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
 igt_main
 {
 	igt_display_t display;
@@ -913,13 +941,48 @@ igt_main
 		for_each_pipe_with_valid_output(&display, pipe, output)
 			run_transition_test(&display, pipe, output, TRANSITION_AFTER_FREE, true, true);
 
+	/*
+	 * Test modeset cases on internal panels separately with a reduced
+	 * number of combinations, to avoid long runtimes due to modesets on
+	 * panels with long power cycle delays.
+	 */
 	igt_subtest("plane-all-modeset-transition")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
 
 	igt_subtest("plane-all-modeset-transition-fencing")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, false);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, true);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
 
 	igt_subtest("plane-toggle-modeset-transition")
 		for_each_pipe_with_valid_output(&display, pipe, output)
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v3 1/1
#7 lore raw

Op 08-11-17 om 20:33 schreef Imre Deak:

Quoted 18 lines

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in CI split out the testing of internal panels from the plane modeset subtests and test only a reduced number of plane combinations on these:
where only a single plane is enabled, all planes are disabled or all planes are enabled.

v2:
- Add code comment explaining the need for the separate internal-panels subtests.
- Calculate the number of enabled planes only once. (Chris)
- Disable the slow internal-panels subtests testing all combinations. (Petri)

v3: (Maarten)
- Skip the internal-panels subtests if no internal panels are found.
- Also test transitions with all planes disabled.

Quoted 6 lines

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103334

Cc Maarten Lankhorst <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Chris Wilson <[email protected]>

---

Quoted 116 lines
 tests/kms_atomic_transition.c | 71 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 4 deletions(-)
tests/kms_atomic_transition.c +60 -4
index 4c295125..54581ed7 100644
@@ -189,6 +189,7 @@ enum transition_type {
 	TRANSITION_PLANES,
 	TRANSITION_AFTER_FREE,
 	TRANSITION_MODESET,
+	TRANSITION_MODESET_FAST,
 	TRANSITION_MODESET_DISABLE,
 };
 
@@ -528,6 +529,13 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 	}
 
 	for (i = 0; i < iter_max; i++) {
+		int n_enable_planes = hweight32(i);
+
+		if (type == TRANSITION_MODESET_FAST &&
+		    n_enable_planes > 1 &&
+		    n_enable_planes < pipe_obj->n_planes)
+			continue;
+
 		igt_output_set_pipe(output, pipe);
 
 		wm_setup_plane(display, pipe, i, parms, fencing);
@@ -547,16 +555,23 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 
 			/* i -> i+1 will be done when i increases, can be skipped here */
 			for (j = iter_max - 1; j > i + 1; j--) {
+				n_enable_planes = hweight32(j);
+
+				if (type == TRANSITION_MODESET_FAST &&
+				    n_enable_planes > 1 &&
+				    n_enable_planes < pipe_obj->n_planes)
+					continue;
+
 				wm_setup_plane(display, pipe, j, parms, fencing);
 
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, &override_mode);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing);
 				wait_for_transition(display, pipe, nonblocking, fencing);
 
 				wm_setup_plane(display, pipe, i, parms, fencing);
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, NULL);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) i, fencing);
@@ -864,6 +879,19 @@ static void run_modeset_transition(igt_display_t *display, int requested_outputs
 	run_modeset_tests(display, requested_outputs, nonblocking, fencing);
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
 igt_main
 {
 	igt_display_t display;
@@ -913,13 +941,48 @@ igt_main
 		for_each_pipe_with_valid_output(&display, pipe, output)
 			run_transition_test(&display, pipe, output, TRANSITION_AFTER_FREE, true, true);
 
+	/*
+	 * Test modeset cases on internal panels separately with a reduced
+	 * number of combinations, to avoid long runtimes due to modesets on
+	 * panels with long power cycle delays.
+	 */
 	igt_subtest("plane-all-modeset-transition")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
 
 	igt_subtest("plane-all-modeset-transition-fencing")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, false);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {

tests/kms_atomic_transition.c igt_main · line 988

Quoted 10 lines
tests/kms_atomic_transition.c +7 -0
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, true);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
 
 	igt_subtest("plane-toggle-modeset-transition")
 		for_each_pipe_with_valid_output(&display, pipe, output)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#8 lore raw
Quoted 19 lines · Maarten Lankhorst

Op 08-11-17 om 20:33 schreef Imre Deak:

Quoted 18 lines

Doing modeset on internal panels may have a considerable overhead due to the panel specific power sequencing delays. To avoid long test runtimes in CI split out the testing of internal panels from the plane modeset subtests and test only a reduced number of plane combinations on these:
where only a single plane is enabled, all planes are disabled or all planes are enabled.

v2:
- Add code comment explaining the need for the separate internal-panels subtests.
- Calculate the number of enabled planes only once. (Chris)
- Disable the slow internal-panels subtests testing all combinations. (Petri)

v3: (Maarten)
- Skip the internal-panels subtests if no internal panels are found.
- Also test transitions with all planes disabled.

Quoted 8 lines
Quoted 6 lines

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103334

Cc Maarten Lankhorst <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Chris Wilson <[email protected]>

---

Thanks for the reviews, I pushed the patch.

Quoted 125 lines
Quoted 125 lines
 tests/kms_atomic_transition.c | 71 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 4 deletions(-)
tests/kms_atomic_transition.c +67 -4
index 4c295125..54581ed7 100644
@@ -189,6 +189,7 @@ enum transition_type {
 	TRANSITION_PLANES,
 	TRANSITION_AFTER_FREE,
 	TRANSITION_MODESET,
+	TRANSITION_MODESET_FAST,
 	TRANSITION_MODESET_DISABLE,
 };
 
@@ -528,6 +529,13 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 	}
 
 	for (i = 0; i < iter_max; i++) {
+		int n_enable_planes = hweight32(i);
+
+		if (type == TRANSITION_MODESET_FAST &&
+		    n_enable_planes > 1 &&
+		    n_enable_planes < pipe_obj->n_planes)
+			continue;
+
 		igt_output_set_pipe(output, pipe);
 
 		wm_setup_plane(display, pipe, i, parms, fencing);
@@ -547,16 +555,23 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
 
 			/* i -> i+1 will be done when i increases, can be skipped here */
 			for (j = iter_max - 1; j > i + 1; j--) {
+				n_enable_planes = hweight32(j);
+
+				if (type == TRANSITION_MODESET_FAST &&
+				    n_enable_planes > 1 &&
+				    n_enable_planes < pipe_obj->n_planes)
+					continue;
+
 				wm_setup_plane(display, pipe, j, parms, fencing);
 
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, &override_mode);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing);
 				wait_for_transition(display, pipe, nonblocking, fencing);
 
 				wm_setup_plane(display, pipe, i, parms, fencing);
-				if (type == TRANSITION_MODESET)
+				if (type >= TRANSITION_MODESET)
 					igt_output_override_mode(output, NULL);
 
 				atomic_commit(display, pipe, flags, (void *)(unsigned long) i, fencing);
@@ -864,6 +879,19 @@ static void run_modeset_transition(igt_display_t *display, int requested_outputs
 	run_modeset_tests(display, requested_outputs, nonblocking, fencing);
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
 igt_main
 {
 	igt_display_t display;
@@ -913,13 +941,48 @@ igt_main
 		for_each_pipe_with_valid_output(&display, pipe, output)
 			run_transition_test(&display, pipe, output, TRANSITION_AFTER_FREE, true, true);
 
+	/*
+	 * Test modeset cases on internal panels separately with a reduced
+	 * number of combinations, to avoid long runtimes due to modesets on
+	 * panels with long power cycle delays.
+	 */
 	igt_subtest("plane-all-modeset-transition")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, false);
+		}
 
 	igt_subtest("plane-all-modeset-transition-fencing")
-		for_each_pipe_with_valid_output(&display, pipe, output)
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (output_is_internal_panel(output))
+				continue;
 			run_transition_test(&display, pipe, output, TRANSITION_MODESET, false, true);
+		}
+
+	igt_subtest("plane-all-modeset-transition-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, false);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
+
+	igt_subtest("plane-all-modeset-transition-fencing-internal-panels") {
+		int tested = 0;
+
+		for_each_pipe_with_valid_output(&display, pipe, output) {
+			if (!output_is_internal_panel(output))
+				continue;
+			run_transition_test(&display, pipe, output, TRANSITION_MODESET_FAST, false, true);
+			tested++;
+		}
+		igt_skip_on_f(!tested, "No output with internal panel found\n");
+	}
 
Quoted 4 lines

tests/kms_atomic_transition.c igt_main · line 988

Quoted 2 lines
tests/kms_atomic_transition.c +0 -0
 	igt_subtest("plane-toggle-modeset-transition")
 		for_each_pipe_with_valid_output(&display, pipe, output)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✓ Fi.CI.BAT: success for kms_atomic_transition: Split out modeset tests on internal panels (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: kms_atomic_transition: Split out modeset tests on internal panels (rev2)
URL : https://patchwork.freedesktop.org/series/33052/
State : success

== Summary ==

IGT patchset tested on top of latest successful build c8d1ea24d3bfaf11b223bbe22407aeca196d0d89 tests/debugfs_test: Pretty print subdirectories

with latest DRM-Tip kernel build CI_DRM_3312
de359919ae46 drm-tip: 2017y-11m-03d-14h-00m-37s UTC integration manifest

Testlist changes:
+igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels +igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels

Test gem_exec_flush:

        Subgroup basic-wb-set-default:
                incomplete -> PASS       (fi-glk-dsi)
Test gem_exec_reloc:
        Subgroup basic-write-gtt-active:
                fail       -> PASS       (fi-gdg-551) fdo#102582
Test kms_busy:
        Subgroup basic-flip-b:
                fail       -> PASS       (fi-bwr-2160)
Test drv_module_reload:
        Subgroup basic-no-display:
                fail       -> PASS       (fi-hsw-4770r) fdo#103534

fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582
fdo#103534 https://bugs.freedesktop.org/show_bug.cgi?id=103534

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:446s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:467s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:383s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:552s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:278s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:502s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:504s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:507s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:496s
fi-cfl-s         total:289  pass:254  dwarn:3   dfail:0   fail:0   skip:32  time:555s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:427s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:266s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:592s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:497s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:432s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:434s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:425s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:500s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:462s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:496s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:578s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:476s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:576s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:577s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:457s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:595s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:652s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:526s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:510s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:461s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:575s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:434s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_474/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

✗ Fi.CI.IGT: failure for kms_atomic_transition: Split out modeset tests on internal panels (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: kms_atomic_transition: Split out modeset tests on internal panels (rev2)
URL : https://patchwork.freedesktop.org/series/33052/
State : failure

== Summary ==

Test kms_busy:

        Subgroup extended-modeset-hang-newfb-with-reset-render-B:
                pass       -> DMESG-WARN (shard-hsw)
        Subgroup extended-modeset-hang-oldfb-with-reset-render-C:
                pass       -> DMESG-WARN (shard-hsw)
Test kms_setmode:
        Subgroup basic:
                fail       -> PASS       (shard-hsw) fdo#99912
Test drv_suspend:
        Subgroup fence-restore-untiled-hibernate:
                dmesg-fail -> FAIL       (shard-hsw) fdo#103375
        Subgroup debugfs-reader:
                pass       -> INCOMPLETE (shard-hsw)

fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375

shard-hsw total:2492 pass:1408 dwarn:2 dfail:0 fail:8 skip:1073 time:9100s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_474/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

✗ Fi.CI.BAT: failure for kms_atomic_transition: Split out modeset tests on internal panels (rev3)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: kms_atomic_transition: Split out modeset tests on internal panels (rev3)
URL : https://patchwork.freedesktop.org/series/33052/
State : failure

== Summary ==

IGT patchset tested on top of latest successful build 9fe5a9a3de9e2ce345d5967a1e10a9a586b19836 tests/kms_fbcon_fbt: Report fbc_status on error

with latest DRM-Tip kernel build CI_DRM_3322
d284738777d7 drm-tip: 2017y-11m-08d-17h-36m-01s UTC integration manifest

Testlist changes:
+igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels +igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels

Test chamelium:

        Subgroup dp-crc-fast:
                fail       -> PASS       (fi-kbl-7500u) fdo#102514
Test gem_mmap_gtt:
        Subgroup basic-wc:
                pass       -> DMESG-WARN (fi-bsw-n3050)
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-legacy:
                fail       -> PASS       (fi-gdg-551) fdo#102618
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                pass       -> INCOMPLETE (fi-snb-2520m)

fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#102618 https://bugs.freedesktop.org/show_bug.cgi?id=102618

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:451s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:462s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:384s
fi-bsw-n3050     total:289  pass:242  dwarn:1   dfail:0   fail:0   skip:46  time:545s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:275s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:508s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:518s
fi-byt-j1900     total:289  pass:254  dwarn:0   dfail:0   fail:0   skip:35  time:506s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:429s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:265s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:543s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:430s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:442s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:432s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:483s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:462s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:484s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:523s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:481s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:536s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:570s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:462s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:546s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:566s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:524s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:497s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:452s
fi-snb-2520m     total:246  pass:212  dwarn:0   dfail:0   fail:0   skip:33 
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:422s
Blacklisted hosts:
fi-cfl-s         total:289  pass:254  dwarn:3   dfail:0   fail:0   skip:32  time:531s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:554s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_487/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx