bus: arm-cci: fix device_node refcount leak in cci_probe_ports()
PATCH 1/1 bus: arm-cci: fix device_node refcount leak in cci_probe_ports()
cci_probe_ports() has two device_node refcount bugs in its for_each_available_child_of_node() loop over "cp":
- When the computed port index "i" reaches nb_cci_ports, the loop breaks out without releasing the reference the iterator was holding on "cp", leaking it.
- When a port is successfully parsed, "cp" is stored into ports[i].dn for later use, but the loop keeps iterating afterwards. The next for_each_available_child_of_node() step puts the reference on the previous "cp" to advance to the next sibling, so the pointer saved in ports[i].dn is left referencing a node whose reference was already dropped.
Rework the loop around for_each_available_child_of_node_scoped() so the iterator's reference is dropped automatically on every exit path, including the early break. Since a matched node is kept alive in ports[i].dn past the end of the loop, take an explicit reference with of_node_get() when storing it.
--- drivers/bus/arm-cci.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/bus/arm-cci.c +2 -3
@@ -438,8 +438,7 @@static int cci_probe_ports (struct device_node *np) {struct cci_nb_ports const *cci_config;int ret, i, nb_ace =0 , nb_ace_lite =0 ; -struct device_node *cp;struct resource res;const char *match_str;bool is_ace;
@@ -455,7 +455,7 @@ static int cci_probe_ports(struct device_node *np)if (!ports)return -ENOMEM ; -for_each_available_child_of_node (np, cp) { +for_each_available_child_of_node_scoped (np, cp) {if (!of_match_node (arm_cci_ctrl_if_matches, cp))continue ;
@@ -498,7 +498,7 @@ static int cci_probe_ports(struct device_node *np) ports[i].type =ACE_LITE_PORT ; ++nb_ace_lite; } - ports[i].dn = cp; + ports[i].dn =of_node_get (cp); }/*
--
2.46.2.windows.1
Quoted 2 lines
cci_probe_ports()has twodevice_noderefcount bugs in itsfor_each_available_child_of_node()loop over "cp":
…
How do you think about to add any tags (like “Fixes” and “Cc”) accordingly?
See also:
* https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v7.2-rc5#n145
* https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/stable-kernel-rules.rst?h=v7.2-rc5#n34
Regards,
Markus
Quoted 5 lines · Markus Elfring
Quoted 2 lines
cci_probe_ports()has twodevice_noderefcount bugs in itsfor_each_available_child_of_node()loop over "cp":…
How do you think about to add any tags (like “Fixes” and “Cc”) accordingly?
No.
Quoted 7 lines
See also:
* https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v7.2-rc5#n145
* https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/stable-kernel-rules.rst?h=v7.2-rc5#n34Regards,
Markus
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
cci_probe_ports()has twodevice_noderefcount bugs in itsfor_each_available_child_of_node()loop over "cp":…
How do you think about to add any tags (like “Fixes” and “Cc”) accordingly?
No.
Have you got special imaginations for the bug severity?
Regards,
Markus
Quoted 6 lines · Manush Prajwal
cci_probe_ports()has twodevice_noderefcount bugs in itsfor_each_available_child_of_node()loop over "cp":- When the computed port index "i" reaches
nb_cci_ports, the loop breaks out without releasing the reference the iterator was holding on "cp", leaking it.
Note that this could only happen if the DT is bogus and specifies more control interfaces than can physically exist. And even then, holding an extra reference to a child node doesn't do any harm, since a) we already hold a reference on the parent node, and b) it's not like you could remove the system interconnect at runtime anyway.
Quoted 6 lines
- When a port is successfully parsed, "cp" is stored into ports[i].dn for later use, but the loop keeps iterating afterwards. The next
for_each_available_child_of_node()step puts the reference on the previous "cp" to advance to the next sibling, so the pointer saved in ports[i].dn is left referencing a node whose reference was already dropped.
...and similarly this isn't a practical issue as we never dereference the saved pointers; they're only used for comparison, which in reality happens once in cci_ace_init_ports() immediately after this is done once . Plus we do already hold a reference on their parent node, and it's not like you could remove the system interconnect at runtime anyway ;)
Quoted 5 lines
Rework the loop around
for_each_available_child_of_node_scoped()so the iterator's reference is dropped automatically on every exit path, including the early break. Since a matched node is kept alive in ports[i].dn past the end of the loop, take an explicit reference withof_node_get()when storing it.
However, for the sake of good practice, just in case anyone were to try to copy this code as an example for something else, it seems like a reasonable cleanup to me.
Quoted 39 lines
Signed-off-by Manush Prajwal <[email protected]>--- drivers/bus/arm-cci.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)drivers/bus/arm-cci.c +2
-4@@ -438,8 +438,7 @@static int cci_probe_ports (struct device_node *np) {struct cci_nb_ports const *cci_config;int ret, i, nb_ace =0 , nb_ace_lite =0 ; -struct device_node *cp;struct resource res;const char *match_str;bool is_ace;@@ -455,7 +455,7 @@ static int cci_probe_ports(struct device_node *np)if (!ports)return -ENOMEM ; -for_each_available_child_of_node (np, cp) { +for_each_available_child_of_node_scoped (np, cp) {if (!of_match_node (arm_cci_ctrl_if_matches, cp))continue ;@@ -498,7 +498,7 @@ static int cci_probe_ports(struct device_node *np) ports[i].type =ACE_LITE_PORT ; ++nb_ace_lite; } - ports[i].dn = cp; + ports[i].dn =of_node_get (cp); }/* -- 2.46.2.windows.1