Skip to contentSkip to conversation

USB DSL modem

DISCUSSION Paul Furness 4 participants 4 messages Dec 10, 2003 – Dec 11, 2003

lore
Share & tools
lore
#0 lore raw

Hello.

Can anyone point me at some useful information about setting up a DSL modem connected to a linux box via USB?

What happened here is that I recently got a DSL connection set up at home. Part of the sign up package included an Alcatel 'Speedtouch' USB connected modem and some filters. I plugged it all in and set it up under windows without a hitch, and it's working beautifully. However, I want to connect when I'm booted into linux (currently RedHat 9 although probably Fedora soon).

I spent an age hunting around for HOWTOs and so on, and while there are a few things written about how to configure the networking so it will connect to a DHCP/DSL router and such like, I can't find anything at all about how to make a USB modem wake up and connect.

I know that the kernel supports USB fine, and when I do 'lsusb' the modem appears in the list, so that's working. But I don't know what to do next.

I know that I could buy a router with a modem built in, and I may end up doing that if I have to. But it needs to include a wireless connection to my PC, so would cost £70 plus and I'd like to try and avoid spending any money on it if I possibly can; I already own the modem I have, since it was 'free'.

Oh, when it's connected in Windows, the modem shows up as using PPPoA, which I think means that roaring penguin won't help.

Can anyone give me any leads?

Paul.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 4 lines · Paul Furness

I spent an age hunting around for HOWTOs and so on, and while there are a few things written about how to configure the networking so it will connect to a DHCP/DSL router and such like, I can't find anything at all about how to make a USB modem wake up and connect.

I dont have one of these's things to be able to tell your howto do anything, normally i would not even reply to any mail unless i have had experiance with such a thing, however i will need to do the same as you very shortly so i went hunting and found some nice URL's for you (and me then...)

I use www.google.com/linux and used ;
Alcatel 'Speedtouch' USB
As the search words, one which may interest you is;
http://linux-usb.sourceforge.net/SpeedTouch/
There are more links there, i suggest;
http://sourceforge.net/project/showfiles.php?group_id=3581

I am not saying you "will" find what you need there but it seems a pretty good place to start.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Paul Furness
Quoted 27 lines · Paul Furness

Hello.

Can anyone point me at some useful information about setting up a DSL modem connected to a linux box via USB?

What happened here is that I recently got a DSL connection set up at home. Part of the sign up package included an Alcatel 'Speedtouch' USB connected modem and some filters. I plugged it all in and set it up under windows without a hitch, and it's working beautifully. However, I want to connect when I'm booted into linux (currently RedHat 9 although probably Fedora soon).

I spent an age hunting around for HOWTOs and so on, and while there are a few things written about how to configure the networking so it will connect to a DHCP/DSL router and such like, I can't find anything at all about how to make a USB modem wake up and connect.

I know that the kernel supports USB fine, and when I do 'lsusb' the modem appears in the list, so that's working. But I don't know what to do next.

I know that I could buy a router with a modem built in, and I may end up doing that if I have to. But it needs to include a wireless connection to my PC, so would cost £70 plus and I'd like to try and avoid spending any money on it if I possibly can; I already own the modem I have, since it was 'free'.

Quoted 4 lines

Oh, when it's connected in Windows, the modem shows up as using PPPoA, which I think means that roaring penguin won't help.

Can anyone give me any leads?

Paul -- Like Richard, I have no experience with this hardware. (When I got DSL several years ago, my local carrier was trying to push USB-based hardware, but I successfully demanded Ethernet equipment. So did a lot of its customers, apparently, since it reverted to Ethernet for all customers soon after.) I have seen references to it on the leaf-users mailing list (leaf.sourceforge.net), so you might want to take a look at the archive of that list for leads.

I did want to point out, in case it is not already clear to you, that your message describes two separate and distinct problems:

1. You need to get the USB modem itself working with the Linux kernel.

2. You need to get PPPoA working.

The second would remain a problem even if you replaced the hardware with an Ethernet-based DSL modem.

That said, the Debian package "speedtouch" appears to provide both the needed userspace driver for hardware connectivity and a PPPoA daemon. You might see if your distro has this package in its packaging system.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw

Hi,

This all very much depends on what chipset your modem was built with. The speedtouch package will only work with the Alcatel based designs, for others you might have to search around for the hardware driver. It could be that there is currently no support for your modem (I too have had this problem and resorted to buying the Conexant PCI one that Dabs is doing) but there are a few out there especially if your Spanish is good!

Jeremy

Quoted 64 lines · Ray Olszewski
Quoted 27 lines · Paul Furness

Hello.

Can anyone point me at some useful information about setting up a DSL modem connected to a linux box via USB?

What happened here is that I recently got a DSL connection set up at home. Part of the sign up package included an Alcatel 'Speedtouch' USB connected modem and some filters. I plugged it all in and set it up under windows without a hitch, and it's working beautifully. However, I want to connect when I'm booted into linux (currently RedHat 9 although probably Fedora soon).

I spent an age hunting around for HOWTOs and so on, and while there are a few things written about how to configure the networking so it will connect to a DHCP/DSL router and such like, I can't find anything at all about how to make a USB modem wake up and connect.

I know that the kernel supports USB fine, and when I do 'lsusb' the modem appears in the list, so that's working. But I don't know what to do next.

I know that I could buy a router with a modem built in, and I may end up doing that if I have to. But it needs to include a wireless connection to my PC, so would cost £70 plus and I'd like to try and avoid spending any money on it if I possibly can; I already own the modem I have, since it was 'free'.

Quoted 4 lines

Oh, when it's connected in Windows, the modem shows up as using PPPoA, which I think means that roaring penguin won't help.

Can anyone give me any leads?

Paul -- Like Richard, I have no experience with this hardware. (When I got DSL several years ago, my local carrier was trying to push USB-based hardware, but I successfully demanded Ethernet equipment. So did a lot of its customers, apparently, since it reverted to Ethernet for all customers soon after.) I have seen references to it on the leaf-users mailing list (leaf.sourceforge.net), so you might want to take a look at the archive of that list for leads.

I did want to point out, in case it is not already clear to you, that your message describes two separate and distinct problems:

1. You need to get the USB modem itself working with the Linux kernel.

2. You need to get PPPoA working.

The second would remain a problem even if you replaced the hardware with an Ethernet-based DSL modem.

That said, the Debian package "speedtouch" appears to provide both the needed userspace driver for hardware connectivity and a PPPoA daemon. You might see if your distro has this package in its packaging system.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Quoted 3 lines

--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs