Skip to contentSkip to conversation

imx: Use a clear identification of an unidentified CPU type

PATCH New Otavio Salvador 2 participants 5 messages Jun 30, 2012 – Jul 16, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 imx: Use a clear identification of an unidentified CPU type

In case an unidentified CPU type is detected it now returns i.MX??, in a const char.

Cc Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>

---
Changes for v2:
* use i.MX?? for unidentified CPU type

 arch/arm/cpu/armv7/imx-common/cpu.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/cpu/armv7/imx-common/cpu.c +2 -2
index b3195dd..e7bd0bf 100644
@@ -66,7 +66,7 @@ char *get_reset_cause(void)
 
 #if defined(CONFIG_DISPLAY_CPUINFO)
 
-static char *get_imx_type(u32 imxtype)
+static const char *get_imx_type(u32 imxtype)
 {
 	switch (imxtype) {
 	case 0x63:
@@ -80,7 +80,7 @@ static char *get_imx_type(u32 imxtype)
 	case 0x53:
 		return "53";
 	default:
-		return "unknown";
+		return "??";
 	}
 }
 
Signature · 1 line
1.7.10
#1 lore raw

PATCH v3 2/2 mxs: generalize code for print_cpuinfo()

The information now is gathered from HW_DIGCTL_CHIPID register and includes the revision of the chip on the output.

Cc Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>

---
Changes for v3:
* fix info order (first rev, then clock)

Changes for v2:
* use ?? for unidentified revision and cpu type
* use numeric revisions

 arch/arm/cpu/arm926ejs/mx28/mx28.c           |   55 +++++++++++++++++++++++++-
 arch/arm/include/asm/arch-mx28/regs-digctl.h |    5 +++
 2 files changed, 58 insertions(+), 2 deletions(-)
arch/arm/cpu/arm926ejs/mx28/mx28.c +53 -2
index a82ff25..56e10ad 100644
@@ -190,13 +190,64 @@ int arch_cpu_init(void)
 #endif
 
 #if defined(CONFIG_DISPLAY_CPUINFO)
+static const char *get_cpu_type(void)
+{
+	struct mx28_digctl_regs *digctl_regs =
+		(struct mx28_digctl_regs *)MXS_DIGCTL_BASE;
+
+	switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) {
+	case HW_DIGCTL_CHIPID_MX28:
+		return "28";
+	case HW_DIGCTL_CHIPID_MX23:
+		return "23";
+	default:
+		return "??";
+	}
+}
+
+static const char *get_cpu_rev(void)
+{
+	struct mx28_digctl_regs *digctl_regs =
+		(struct mx28_digctl_regs *)MXS_DIGCTL_BASE;
+	uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF;
+
+	switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) {
+	case HW_DIGCTL_CHIPID_MX28:
+		switch (rev) {
+		case 0x1:
+			return "1.2";
+		default:
+			return "??";
+		}
+	case HW_DIGCTL_CHIPID_MX23:
+		switch (rev) {
+		case 0x0:
+			return "1.0";
+		case 0x1:
+			return "1.1";
+		case 0x2:
+			return "1.2";
+		case 0x3:
+			return "1.3";
+		case 0x4:
+			return "1.4";
+		default:
+			return "??";
+		}
+	default:
+		return "??";
+	}
+}
+
 int print_cpuinfo(void)
 {
 	struct mx28_spl_data *data = (struct mx28_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf);
 
-	printf("Freescale i.MX28 family at %d MHz\n",
-			mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("CPU:   Freescale i.MX%s rev%s at %d MHz\n",
+		get_cpu_type(),
+		get_cpu_rev(),
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
 	printf("BOOT:  %s\n", mx28_boot_modes[data->boot_mode_idx].mode);
 	return 0;
 }
arch/arm/include/asm/arch-mx28/regs-digctl.h +5 -0
index 9a63594..67f91e7 100644
@@ -152,4 +152,9 @@ struct mx28_digctl_regs {
 };
 #endif
 
+/* Product code identification */
+#define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
+#define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
+#define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)
+
 #endif /* __MX28_REGS_DIGCTL_H__ */
Signature · 1 line
1.7.10
#2 lore raw

PATCH v3 2/2 mxs: generalize code for print_cpuinfo()

Quoted 9 lines · Otavio Salvador

The information now is gathered from HW_DIGCTL_CHIPID register and includes the revision of the chip on the output.

Cc Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>

---

Hi Otavio,

could you take a look and rebase it ? It does not apply anymore - thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH v3 2/2 mxs: generalize code for print_cpuinfo()

Quoted 5 lines · Stefano Babic
Quoted 2 lines · Otavio Salvador

The information now is gathered from HW_DIGCTL_CHIPID register and includes the revision of the chip on the output.

could you take a look and rebase it ? It does not apply anymore - thanks.

Sure; I splitted it to apply i.MX28 part for now and leave i.MX233 info for the another patchset. Will send it.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#4 lore raw

PATCH v2 1/2 imx: Use a clear identification of an unidentified CPU type

In reply to Otavio Salvador
Quoted 9 lines · Otavio Salvador

In case an unidentified CPU type is detected it now returns i.MX??, in a const char.

Cc Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>

---

Applied to u-boot-imx, next branch, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================