ARM: OMAP4: PANDA: Fix the broken tftp issue.
PATCH 1/1 ARM: OMAP4: PANDA: Fix the broken tftp issue.
USB module pads are getting enabled under non-essential group which are not currently configured.
But these will be required for tftp support.
Commit 1a89a217f5c5ab3645c80c1247e8911a8b5ad491
ARM: OMAP4/5: Move USB pads to essential list.
moved the usb related pads to the essential list, but mux file for PANDA was missed out. Adding it here to ensure TFTP works fine on OMAP4 panda boards.
Tested this on OMAP4430 ES2.2, OMAP4460 ES1.1 PANDA boards.
Signed-off-by R Sricharan <[email protected]>
--- board/ti/panda/panda_mux_data.h | 44 +++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 22 deletions(-)
board/ti/panda/panda_mux_data.h +22 -22
@@ -62,7 +62,26 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)} /* uart3_tx */ +{UART3_TX_IRTX, (M0)}, /* uart3_tx */ +{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ +{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ +{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ +{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ +{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ +{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ +{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ +{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ +{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ +{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ +{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ +{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ +{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ +{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ +{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ +{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ +{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */ +{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ +{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */ };
@@ -70,7 +89,8 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ +{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ +{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ };
@@ -109,7 +129,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ - {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */ {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
@@ -136,22 +155,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ - {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ - {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ - {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ - {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ - {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ - {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ - {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ - {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ - {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ - {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ - {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ - {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ - {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ - {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ - {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ - {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
@@ -211,7 +214,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */ - {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */ {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
@@ -222,7 +224,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ - {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */ {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
@@ -272,7 +273,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = { {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ - {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ {PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: OMAP4: PANDA: Fix the broken tftp issue.
Quoted 7 lines · R Sricharan
USB module pads are getting enabled under non-essential group which are not currently configured.
But these will be required for tftp support.Commit
1a89a217f5c5ab3645c80c1247e8911a8b5ad491
ARM: OMAP4/5: Move USB pads to essential list.
Quoted 7 lines
moved the usb related pads to the essential list, but mux file for PANDA was missed out. Adding it here to ensure TFTP works fine on OMAP4 panda boards.
Tested this on OMAP4430 ES2.2, OMAP4460 ES1.1 PANDA boards.
Signed-off-by R Sricharan <[email protected]>
Tested-by Gary Thomas <[email protected]>
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------