am3517: geting MMC working

DISCUSSION Yegor Yefremov 7 participants 16 messages Jul 19, 2012 – Jul 26, 2012

Subsystems (4)

Arm (32-bit) Arm sub-architectures OMAP2+ support OMAP power management support

lore

Share & tools

lore

Yegor Yefremov

author

2012-07-19 06:25 UTC #0 lore raw

What patches do I need to get MMC working with linux-omap master?

omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47

I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.

Best regards,
Yegor

Shilimkar, Santosh

2012-07-19 06:34 UTC #1 lore raw

Quoted 10 lines · Yegor Yefremov

What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47

Quoted 4 lines

I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.

I guess you need [1] to get around the issue.

Regards
Santosh

[1] http://www.spinics.net/lists/linux-omap/msg73965.html

Yegor Yefremov

author

2012-07-19 06:56 UTC #2 lore raw

Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:

Quoted 11 lines

Quoted 9 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47

Quoted 7 lines

Quoted 4 lines
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html

though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.

[1] http://www.spinics.net/lists/linux-omap/msg73703.html

Yegor

Shilimkar, Santosh

2012-07-19 07:07 UTC #3 lore raw

Quoted 16 lines · Yegor Yefremov

Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.

Quoted 6 lines

Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.

Sorry. I miss-read the message.

Regards
santosh

Yegor Yefremov

author

2012-07-19 07:28 UTC #4 lore raw

Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:

Quoted 18 lines

Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.

Quoted 6 lines

Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.

The whole log for reference:

Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)

NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar

... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384

memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

S, Venkatraman

2012-07-19 07:44 UTC #5 lore raw

Quoted 165 lines · Yegor Yefremov

Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:
Quoted 18 lines
Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.
The whole log for reference:
Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva

Quoted 8 lines

voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --

Debouce clocks failures are non fatal, and are present in OMAP2xxx only. (I don't know about AM35xx, but most likely its not present).
The last 2 lines shows that mmc0 is enumerated, but the boot partition is not. If possible, can you please provide logs with MMC_DEBUG enabled at compile time and a verbose loglevel (loglevel=8) ?

Thanks,
Venkat.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Yegor Yefremov

author

2012-07-19 08:15 UTC #6 lore raw

Am 19.07.2012 09:43, schrieb S, Venkatraman:

Quoted 174 lines

Quoted 164 lines · Yegor Yefremov
Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:
Quoted 18 lines
Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.
The whole log for reference:
Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
Quoted 8 lines
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --

Quoted 2 lines

Debouce clocks failures are non fatal, and are present in OMAP2xxx only. (I don't know about AM35xx, but most likely its not present).

You're right:
http://old.nabble.com/-PATCH-V2--omap_hsmmc:-Fix-for-the-db-clock-failure-message-td25047778.html

Quoted 3 lines

The last 2 lines shows that mmc0 is enumerated, but the boot partition is not. If possible, can you please provide logs with MMC_DEBUG enabled at compile time and a verbose loglevel (loglevel=8) ?

Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61
mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 0Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
omap_hsmmc omap_hsmmc.0: disabled
omap_hsmmc omap_hsmmc.1: context was not lost
omap_hsmmc omap_hsmmc.1: enabled
omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47 omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
mmc0: starting CMD52 arg 00000c00 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x00000c00 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 0Hz
mmc0: starting CMD52 arg 80000c08 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x80000c08 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000 omap_hsmmc omap_hsmmc.1: disabled
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
mmc0: starting CMD8 arg 000001aa flags 000002f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD8, argument 0x000001aa omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD8): 0: 000001aa 00000000 00000000 00000000
mmc0: starting CMD5 arg 00000000 flags 000002e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO davinci_emac davinci_emac.0: using random MAC addr: 0a:e0:2b:8a:d1:27
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD5): -110: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 000000f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD55, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD55): 0: 00400120 00000000 00000000 00000000
mmc0: starting CMD41 arg 00000000 flags 000000e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD41, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD41): 0: 00ff8000 00000000 00000000 00000000
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
Waiting for root device /dev/mmcblk0p2...
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

S, Venkatraman

2012-07-19 08:57 UTC #7 lore raw

Quoted 274 lines · Yegor Yefremov

Am 19.07.2012 09:43, schrieb S, Venkatraman:
Quoted 174 lines
Quoted 164 lines · Yegor Yefremov
Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:
Quoted 18 lines
Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.
The whole log for reference:
Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
Quoted 8 lines
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --
Quoted 2 lines
Debouce clocks failures are non fatal, and are present in OMAP2xxx only. (I don't know about AM35xx, but most likely its not present).
You're right:
http://old.nabble.com/-PATCH-V2--omap_hsmmc:-Fix-for-the-db-clock-failure-message-td25047778.html
Quoted 3 lines
The last 2 lines shows that mmc0 is enumerated, but the boot partition is not. If possible, can you please provide logs with MMC_DEBUG enabled at compile time and a verbose loglevel (loglevel=8) ?
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61
mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 0Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
omap_hsmmc omap_hsmmc.0: disabled
omap_hsmmc omap_hsmmc.1: context was not lost
omap_hsmmc omap_hsmmc.1: enabled
omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47 omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
mmc0: starting CMD52 arg 00000c00 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x00000c00 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 0Hz
mmc0: starting CMD52 arg 80000c08 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x80000c08 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000 omap_hsmmc omap_hsmmc.1: disabled
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
mmc0: starting CMD8 arg 000001aa flags 000002f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD8, argument 0x000001aa omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD8): 0: 000001aa 00000000 00000000 00000000
mmc0: starting CMD5 arg 00000000 flags 000002e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO davinci_emac davinci_emac.0: using random MAC addr: 0a:e0:2b:8a:d1:27
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD5): -110: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 000000f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD55, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD55): 0: 00400120 00000000 00000000 00000000
mmc0: starting CMD41 arg 00000000 flags 000000e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD41, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1

Quoted 9 lines

mmc0: req done (CMD41): 0: 00ff8000 00000000 00000000 00000000
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
Waiting for root device /dev/mmcblk0p2...
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000

From this, one can only infer that the card is not responding at all, and all attempts
are returning with a timeout (CTO=Command Time Out).
These (control) commands don't use DMA, so it's not a DMA issue upto this. If the card is fine, and it worked before, I would suggest a bisect. Meanwhile I'll check lo-master with my OMAP4 boards.

~Venkat
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

T Krishnamoorthy, Balaji

2012-07-19 10:08 UTC #8 lore raw

Quoted 8 lines · Venkatraman

Quoted 4 lines · Yegor Yefremov
Waiting for root device /dev/mmcblk0p2...
mmc0: starting CMD0 arg 00000000 flags 000000c0 omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000

Quoted 8 lines

From this, one can only infer that the card is not responding at all, and all attempts
are returning with a timeout (CTO=Command Time Out).
These (control) commands don't use DMA, so it's not a DMA issue upto this. If the card is fine, and it worked before, I would suggest a bisect. Meanwhile I'll check lo-master with my OMAP4 boards.
~Venkat

I checked on 4430sdp, OMAP4 is able to detect both eMMC and SD with lo-master.

Signature · 2 lines

Thanks and Regards,
Balaji T K

Yegor Yefremov

author

2012-07-19 13:45 UTC #9 lore raw

In reply to S, Venkatraman

Am 19.07.2012 10:57, schrieb S, Venkatraman:

Quoted 283 lines

Quoted 281 lines · Yegor Yefremov
Am 19.07.2012 09:43, schrieb S, Venkatraman:
Quoted 174 lines
Quoted 164 lines · Yegor Yefremov
Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:
Quoted 18 lines
Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.
The whole log for reference:
Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
Quoted 8 lines
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --
Quoted 2 lines
Debouce clocks failures are non fatal, and are present in OMAP2xxx only. (I don't know about AM35xx, but most likely its not present).
You're right:
http://old.nabble.com/-PATCH-V2--omap_hsmmc:-Fix-for-the-db-clock-failure-message-td25047778.html
Quoted 3 lines
The last 2 lines shows that mmc0 is enumerated, but the boot partition is not. If possible, can you please provide logs with MMC_DEBUG enabled at compile time and a verbose loglevel (loglevel=8) ?
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61
mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 0Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
omap_hsmmc omap_hsmmc.0: disabled
omap_hsmmc omap_hsmmc.1: context was not lost
omap_hsmmc omap_hsmmc.1: enabled
omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47 omap_hsmmc omap_hsmmc.0: context was not lost
omap_hsmmc omap_hsmmc.0: enabled
mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
mmc0: starting CMD52 arg 00000c00 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x00000c00 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 0Hz
mmc0: starting CMD52 arg 80000c08 flags 00000195
omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x80000c08 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.1: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000 omap_hsmmc omap_hsmmc.1: disabled
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
mmc0: starting CMD8 arg 000001aa flags 000002f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD8, argument 0x000001aa omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD8): 0: 000001aa 00000000 00000000 00000000
mmc0: starting CMD5 arg 00000000 flags 000002e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO davinci_emac davinci_emac.0: using random MAC addr: 0a:e0:2b:8a:d1:27
mmc0: req failed (CMD5): -110, retrying...
omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 18000
omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO
mmc0: req done (CMD5): -110: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 000000f5
omap_hsmmc omap_hsmmc.0: mmc0: CMD55, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD55): 0: 00400120 00000000 00000000 00000000
mmc0: starting CMD41 arg 00000000 flags 000000e1
omap_hsmmc omap_hsmmc.0: mmc0: CMD41, argument 0x00000000 omap_hsmmc omap_hsmmc.0: IRQ Status is 1
mmc0: req done (CMD41): 0: 00ff8000 00000000 00000000 00000000
mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 15 width 0 timing 0 omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz
Waiting for root device /dev/mmcblk0p2...
mmc0: starting CMD0 arg 00000000 flags 000000c0
omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000

Quoted 6 lines

Quoted 1 line
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).
These (control) commands don't use DMA, so it's not a DMA issue upto this. If the card is fine, and it worked before, I would suggest a bisect. Meanwhile I'll check lo-master with my OMAP4 boards.

WIll bissect. Thanks for help.

Yegor
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Paul Walmsley

2012-07-19 21:38 UTC #10 lore raw

In reply to S, Venkatraman

Quoted 3 lines · Venkatraman

Quoted 1 line
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).

Looks to me like the card is responding to CMD8, CMD55, ACMD41, and CMD0. It's only CMD52 and CMD5 that are timing out. Aren't those timeouts expected with a SD memory card?

- Paul

T Krishnamoorthy, Balaji

2012-07-20 07:28 UTC #11 lore raw

Quoted 9 lines · Paul Walmsley

Quoted 3 lines · Venkatraman
Quoted 1 line
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).
Looks to me like the card is responding to CMD8, CMD55, ACMD41, and CMD0. It's only CMD52 and CMD5 that are timing out. Aren't those timeouts expected with a SD memory card?

yes, those timeouts are expected for SD card.
The failure is due to irq not received/missing for last CMD0. Hi Yegor, Can you provide details for the SD card being used.

Quoted 3 lines

- Paul

Yegor Yefremov

author

2012-07-20 07:39 UTC #12 lore raw

Am 20.07.2012 09:28, schrieb T Krishnamoorthy, Balaji:

Quoted 12 lines · Paul Walmsley

Quoted 8 lines · Venkatraman
Quoted 4 lines
Quoted 2 lines
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).
Looks to me like the card is responding to CMD8, CMD55, ACMD41, and CMD0. It's only CMD52 and CMD5 that are timing out. Aren't those timeouts expected with a SD memory card?
yes, those timeouts are expected for SD card.
The failure is due to irq not received/missing for last CMD0. Hi Yegor, Can you provide details for the SD card being used.

This is Apacer 2GB. In 3.3-rc7 I have no problems with it. Should I enable debugging in 3.3-rc7 and post the output?

Best regards,
Yegor

Yegor Yefremov

author

2012-07-20 08:01 UTC #13 lore raw

Am 20.07.2012 09:39, schrieb Yegor Yefremov:

Quoted 7 lines

Am 20.07.2012 09:28, schrieb T Krishnamoorthy, Balaji:
Quoted 6 lines · Paul Walmsley
Quoted 5 lines · Venkatraman
Quoted 4 lines
Quoted 2 lines
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).

Quoted 8 lines

Quoted 6 lines
Quoted 3 lines
Looks to me like the card is responding to CMD8, CMD55, ACMD41, and CMD0. It's only CMD52 and CMD5 that are timing out. Aren't those timeouts expected with a SD memory card?
yes, those timeouts are expected for SD card.
The failure is due to irq not received/missing for last CMD0. Hi Yegor, Can you provide details for the SD card being used.
This is Apacer 2GB. In 3.3-rc7 I have no problems with it. Should I enable debugging in 3.3-rc7 and post the output?

I found the solution:

arch/arm/mach-omap2/pm34xx.c +1 -1

index e4fc88c..0ab26ab 100644
@@ -359,7 +359,7 @@ static void omap3_pm_idle(void)
 {
 	local_fiq_disable();
 
-	if (omap_irq_pending())
+	if (omap_irq_pending() || !omap3_has_io_wakeup())
 		goto out;
 
 	trace_power_start(POWER_CSTATE, 1, smp_processor_id());

I've seen this hack for some on the mailing list. I think Mark A. Greer introduced it, but I don't remember for sure. Can this patch be applied as it is or there are some infrastructure changes required?

Best regards,
Yegor

Mark A. Greer

2012-07-26 23:31 UTC #14 lore raw

Quoted 33 lines · Yegor Yefremov

Am 20.07.2012 09:39, schrieb Yegor Yefremov:
Quoted 7 lines
Am 20.07.2012 09:28, schrieb T Krishnamoorthy, Balaji:
Quoted 6 lines · Paul Walmsley
Quoted 5 lines · Venkatraman
Quoted 4 lines
Quoted 2 lines
From this, one can only infer that the card is not responding at all,
and all attempts
are returning with a timeout (CTO=Command Time Out).
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Looks to me like the card is responding to CMD8, CMD55, ACMD41, and CMD0. It's only CMD52 and CMD5 that are timing out. Aren't those timeouts expected with a SD memory card?
yes, those timeouts are expected for SD card.
The failure is due to irq not received/missing for last CMD0. Hi Yegor, Can you provide details for the SD card being used.
This is Apacer 2GB. In 3.3-rc7 I have no problems with it. Should I enable debugging in 3.3-rc7 and post the output?
I found the solution:
arch/arm/mach-omap2/pm34xx.c +1 -1
index e4fc88c..0ab26ab 100644
@@ -359,7 +359,7 @@ static void omap3_pm_idle(void)
 {
 	local_fiq_disable();
 
-	if (omap_irq_pending())
+	if (omap_irq_pending() || !omap3_has_io_wakeup())
 		goto out;
 
 	trace_power_start(POWER_CSTATE, 1, smp_processor_id());

Quoted 4 lines

I've seen this hack for some on the mailing list. I think Mark A. Greer introduced it, but I don't remember for sure. Can this patch be applied as it is or there are some infrastructure changes required?

[Oops, I thought I sent this days ago.]

Hi Yegor.

Yep, it was me. That change is unacceptable though, see:

	http://www.spinics.net/lists/arm-kernel/msg168865.html

You were testing on linux-omap/master? If so, hmmm, I thought that branch would work. For now, you can try adding 'nohlt' to the cmdline but that's a bit of a sledgehammer...

Mark

Javier Martinez Canillas

2012-07-19 08:46 UTC #15 lore raw

In reply to S, Venkatraman

Quoted 176 lines · Venkatraman

Quoted 165 lines · Yegor Yefremov
Am 19.07.2012 09:07, schrieb Shilimkar, Santosh:
Quoted 18 lines
Quoted 16 lines · Yegor Yefremov
Am 19.07.2012 08:34, schrieb Shilimkar, Santosh:
Quoted 15 lines
Quoted 13 lines · Yegor Yefremov
What patches do I need to get MMC working with linux-omap master?
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
I searched for this issue and saw some patches for common clock framework that were scheduled for 3.6, but I'm not sure it's enough or weather they are already incorporated in linux-omap.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
I guess you need [1] to get around the issue.
[1] http://www.spinics.net/lists/linux-omap/msg73965.html
though I haven't applied this patch I have DMA activated (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. As far as I can tell, debounce clk is the problem.
Sorry. I miss-read the message.
The whole log for reference:
Booting Linux on physical CPU 0
Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST 2012
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3517/AM3517 EVM
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
AM3517 ES1.1 (l2cache sgx neon )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 earlyprintk=serial,ttyO2,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255MB = 255MB total
Memory: 247380k/247380k available, 14764k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc055e6a8   (5466 kB)
      .init : 0xc055f000 - 0xc0594874   ( 215 kB)
      .data : 0xc0596000 - 0xc05fccc0   ( 412 kB)
       .bss : 0xc05fcce4 - 0xc0b2a1e8   (5302 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
memory used by lock dependency info: 3695 kB
per task-struct memory footprint: 1152 bytes
Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80444ff0 - 0x80445048
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
hw-breakpoint: debug architecture 0x4 unsupported.
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
SCSI subsystem initialized
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource 32k_counter
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 2, 20480 bytes)
UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 483
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled
console [ttyO2] enabled, bootconsole disabled
omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
OneNAND driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver unknown
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 62 omap-dma-engine omap-dma-engine: allocating channel for 61 omap_hsmmc omap_hsmmc.1: Failed to get debounce clk omap-dma-engine omap-dma-engine: allocating channel for 48 omap-dma-engine omap-dma-engine: allocating channel for 47
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
voltdm_scale: No voltage scale API registered for vdd_mpu_iva
Quoted 8 lines
voltdm_scale: No voltage scale API registered for vdd_core
PM: no software I/O chain control; some wakeups may be lost ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable. --

Quoted 6 lines

Debouce clocks failures are non fatal, and are present in OMAP2xxx only. (I don't know about AM35xx, but most likely its not present).
The last 2 lines shows that mmc0 is enumerated, but the boot partition is not. If possible, can you please provide logs with MMC_DEBUG enabled at compile time and a verbose loglevel (loglevel=8) ?

Hi Yegor,

In case is of some help to you I had the exact problem than you on an IGEPv2 board (TI DM3730 OMAP3 board)

But enabling CONFIG_DMA_OMAP and CONFIG_DMADEVICES solve it. Now on booting I have this log:

[    2.312866] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
[    2.319335] omap-dma-engine omap-dma-engine: allocating channel for 48
[    2.326324] omap-dma-engine omap-dma-engine: allocating channel for 47
[    2.377716] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[    2.384124] omap-dma-engine omap-dma-engine: allocating channel for 62
[    2.390991] omap-dma-engine omap-dma-engine: allocating channel for 61

and the MMC is working well.

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html