man: enclose referenced man page names in bold
PATCH 1/1 man: enclose referenced man page names in bold
Man page parsers will autolink appropriately formated man page references. The most common format is to have the page name in bold followed by the section number in brackets.
--- src/iwd.ap.rst | 8 ++++---- src/iwd.config.rst | 4 ++-- src/iwd.debug.rst | 2 +- src/iwd.network.rst | 8 ++++---- src/iwd.rst | 14 +++++++------- 5 files changed, 18 insertions(+), 18 deletions(-)
src/iwd.ap.rst +4 -4
@@ -33,7 +33,7 @@ method is used. FILE FORMAT =========== -See *iwd.network* for details on the settings file syntax. +See **iwd.network**\(5) for details on the settings file syntax. SETTINGS ========
@@ -62,7 +62,7 @@ The group ``[General]`` contains general AP configuration. Note: Due to regulatory requirements the linux kernel does not allow or strictly limits 5GHz use in AP mode while in world roaming. These frequencies become available once the country is set, either via IWD's - main.conf option ``[General].Country`` (see ``man iwd.config``) or + main.conf option ``[General].Country`` (see **iwd.config**\(5)) or externally (e.g. iw reg set <CC>). If you are having trouble using 5GHz ensure the country is set, and that the desired frequency/channel is unrestricted.
@@ -122,7 +122,7 @@ IPv4 Network Configuration The group ``[IPv4]`` contains settings for IWD's built-in DHCP server. All settings are optional. They're used if network configuration was enabled as -described in ``iwd.config(5)``. Omitting the ``[IPv4]`` group disables +described in **iwd.config**\(5). Omitting the ``[IPv4]`` group disables network configuration for this access point so if an all-defaults DHCP setup is desired, the group header line must still be present:
@@ -230,4 +230,4 @@ The group ``[WSC]`` fine-tunes some Wi-Fi Simple Configuration local parameters SEE ALSO ======== -iwd(8), iwd.network(5) +**iwd**\(8), **iwd.network**\(5)
src/iwd.config.rst +2 -2
@@ -35,7 +35,7 @@ chosen. The presence of *main.conf* is not required. FILE FORMAT =========== -See *iwd.network* for details on the file format. +See **iwd.network**\(5) for details on the file format. SETTINGS ========
@@ -381,4 +381,4 @@ The group ``[IPv4]`` contains settings related to IPv4 network configuration. SEE ALSO ======== -iwd(8), iwd.network(5) +**iwd**\(8), **iwd.network**\(5)
src/iwd.debug.rst +1 -1
@@ -47,4 +47,4 @@ The granularity of the DHCP logging can also be tailored by setting SEE ALSO ======== -iwd(8), iwmon(1) +**iwd**\(8), **iwmon**\(1)
src/iwd.network.rst +4 -4
@@ -133,14 +133,14 @@ The group ``[Settings]`` contains general settings. If enabled, the MAC address will be fully randomized on each connection. This option is only used if [General].AddressRandomization is set to - 'network'. See iwd.config. This setting should not be used with + 'network'. See **iwd.config**\(5). This setting should not be used with [Settings].AddressOverride, if both are set AddressOverride will be used. * - AddressOverride - MAC address string Override the MAC address used for connecting to this network. This option is only used if [General].AddressRandomization is set to 'network'. See - iwd.config. This setting should not be used with + **iwd.config**\(5). This setting should not be used with [Settings].AlwaysRandomizeAddress, if both are set AddressOverride will be used. * - TransitionDisable
@@ -180,7 +180,7 @@ Network Authentication Settings The group ``[Security]`` contains settings for Wi-Fi security and authentication configuration. This group can be encrypted by enabling -``SystemdEncrypt``, see *iwd.config* for details on this option. If this +``SystemdEncrypt``, see **iwd.config**\(5) for details on this option. If this section is encrypted (only contains EncryptedSalt/EncryptedSecurity) it should not be modified. Modifying these values will result in the inability to connect to that network.
@@ -541,4 +541,4 @@ PEAP + MSCHAPv2 SEE ALSO ======== -iwd(8), iwd.config(5) +**iwd**\(8), **iwd.config**\(5)
src/iwd.rst +7 -7
@@ -44,19 +44,19 @@ OPTIONS ENVIRONMENT =========== -*$STATE_DIRECTORY* is used for network configuration files. See *iwd.network* -for details. +*$STATE_DIRECTORY* is used for network configuration files. See +**iwd.network**\(5) for details. *$CONFIGURATION_DIRECTORY* is used for daemon configuration settings. Only -the file **main.conf** is currently read from this directory. See *iwd.config* -for details. +the file **main.conf** is currently read from this directory. See +**iwd.config**\(5) for details. -See *iwd.debug* for further environment variables for debugging. +See **iwd.debug**\(7) for further environment variables for debugging. SEE ALSO ======== -iwd.config(5), iwd.network(5), iwd.debug(7), iwctl(1), iwmon(1), hwsim(1), -ead(8), systemd.exec(5) +**iwd.config**\(5), **iwd.network**\(5), **iwd.debug**\(7), **iwctl**\(1), +**iwmon**\(1), **hwsim**\(1), **ead**\(8), **systemd.exec**\(5) http://iwd.wiki.kernel.org
Signature · 1 line
2.40.0
Hi,
Quoted 6 lines · On Mar 21, 2023, at 17:19, nl6720 <[email protected]> wrote:
Man page parsers will autolink appropriately formated man page references. The most common format is to have the page name in bold followed by the section number in brackets.
---
Quoted 6 lines
src/iwd.ap.rst | 8 ++++---- src/iwd.config.rst | 4 ++-- src/iwd.debug.rst | 2 +- src/iwd.network.rst | 8 ++++---- src/iwd.rst | 14 +++++++------- 5 files changed, 18 insertions(+), 18 deletions(-)
can you fix your git config and add real name info to the author information please.
Regards
Marcel
Quoted 6 lines · On Friday, 24 March 2023 16:12:58 EEST Marcel Holtmann wrote:
can you fix your git config and add real name info to the author information please.
Regards
Marcel
Sorry, but I have no intention of revealing my name.
nl6720