cachebench: new package
PATCH 1/1 cachebench: new package
This patch adds the cachebench package.
Cachebench presents itself as a program to empirically determine some parameters about an architectures memory subsystem. It can be used to have an idea of the performance of the cache support. It has been integrated into LLCbench (Low Level Characterization Benchmarks), but currently only Cachebench is supported by Buildroot. The only difference with mainline is a patch which add a script to be able to generate data ready to bu used by gnuplot without having to use 'make' which is usually not present on embedded target.
--- package/Config.in | 1 + package/cachebench/Config.in | 13 ++++ ...ipt-rules-of-Makefile-to-run-it-on-target.patch | 65 ++++++++++++++++++++ package/cachebench/cachebench.mk | 30 +++++++++ 4 files changed, 109 insertions(+) create mode 100644 package/cachebench/Config.in create mode 100644 package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch create mode 100644 package/cachebench/cachebench.mk
package/Config.in +1 -0
@@ -17,6 +17,7 @@ source "package/xz/Config.in" endmenu menu "Debugging, profiling and benchmark" +source "package/cachebench/Config.in" source "package/bonnie/Config.in" source "package/dhrystone/Config.in" source "package/dstat/Config.in"
package/cachebench/Config.in new file +13 -0
@@ -0,0 +1,13 @@ +config BR2_PACKAGE_CACHEBENCH + bool "cachebench" + help + + Cachebench presents itself as a program to empirically determine + some parameters about an architectures memory subsystem. It can + be used to have an idea of the performance of the cache + support. It has been integrated into LLCbench (Low Level + Characterization Benchmarks), but currently only Cachebench is + supported by Buildroot. + + http://icl.cs.utk.edu/projects/llcbench/cachebench.html +
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +65 -0
65 lines not on this page · raw message
package/cachebench/cachebench.mk new file +30 -0
@@ -0,0 +1,30 @@ +############################################################# +# +# cachebench +# +############################################################# +CACHEBENCH_VERSION = 1.11 +CACHEBENCH_SOURCE = llcbench.tar.gz +CACHEBENCH_SITE = http://icl.cs.utk.edu/projects/llcbench/ +CACHEBENCH_LICENSE = GPLv3 +CACHEBENCH_LICENSE_FILES = COPYING + +define CACHEBENCH_CONFIGURE_CMDS + $(MAKE) -C $(@D) linux-lam +endef + +define CACHEBENCH_BUILD_CMDS + $(MAKE) BB_CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" -C $(@D) cache-bench +endef + +define CACHEBENCH_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/cachebench/cachebench $(TARGET_DIR)/usr/bin/cachebench + $(INSTALL) -m 0755 -D $(@D)/cachebench/do_bench.sh $(TARGET_DIR)/usr/share/cachebench/do_bench.sh + cp $(@D)/cachebench/cachegraph.gp $(TARGET_DIR)/usr/share/cachebench/cachegraph.gp +endef + +define CACHEBENCH_UNINSTALL_TARGET_CMDS + $(RM) $(TARGET_DIR)/usr/bin/cachebench +endef + +$(eval $(generic-package))
Signature · 1 line
1.7.9.5
PATCH 1/1 cachebench: new package
Please don't take this patch I found two typos in the script, I am currently testing the fixes, and I will sent a new version soon.
2012/8/3 Gregory CLEMENT <[email protected]>:
Quoted 167 lines
This patch adds the cachebench package.
Cachebench presents itself as a program to empirically determine some parameters about an architectures memory subsystem. It can be used to have an idea of the performance of the cache support. It has been integrated into LLCbench (Low Level Characterization Benchmarks), but currently only Cachebench is supported by Buildroot. The only difference with mainline is a patch which add a script to be able to generate data ready to bu used by gnuplot without having to use 'make' which is usually not present on embedded target.
Signed-off-by Gregory CLEMENT <[email protected]>--- package/Config.in | 1 + package/cachebench/Config.in | 13 ++++ ...ipt-rules-of-Makefile-to-run-it-on-target.patch | 65 ++++++++++++++++++++ package/cachebench/cachebench.mk | 30 +++++++++ 4 files changed, 109 insertions(+) create mode 100644 package/cachebench/Config.in create mode 100644 package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch create mode 100644 package/cachebench/cachebench.mkpackage/Config.in +1
-0@@ -17,6 +17,7 @@ source "package/xz/Config.in" endmenu menu "Debugging, profiling and benchmark" +source "package/cachebench/Config.in" source "package/bonnie/Config.in" source "package/dhrystone/Config.in" source "package/dstat/Config.in"package/cachebench/Config.in new file +13
-0@@ -0,0 +1,13 @@ +config BR2_PACKAGE_CACHEBENCH + bool "cachebench" + help + + Cachebench presents itself as a program to empirically determine + some parameters about an architectures memory subsystem. It can + be used to have an idea of the performance of the cache + support. It has been integrated into LLCbench (Low Level + Characterization Benchmarks), but currently only Cachebench is + supported by Buildroot. + + http://icl.cs.utk.edu/projects/llcbench/cachebench.html +package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +65
-0@@ -0,0 +1,65 @@ +From 6daded62de221ca0d97360523575b1c7230c8800 Mon Sep 17 00:00:00 2001 +From: Gregory CLEMENT <[email protected]> +Date: Thu, 2 Aug 2012 22:33:36 +0200 +Subject: [PATCH] Convert script rules of Makefile to run it on target + +The benchmark is supposed to be run using the Makefile to be able to +get data ready to be used by gnuplot. On some target we don't have +Makefile available, so this script exctracted from the Makefile can be +used directly to run the benchmark, format data and make a tarball of +the result. +--- + cachebench/do_bench.sh | 40 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 cachebench/do_bench.sh + +diff --git a/cachebench/do_bench.sh b/cachebench/do_bench.sh +new file mode 100644 +index 0000000..a80dcde +--- /dev/null ++++ b/cachebench/do_bench.sh +@@ -0,0 +1,40 @@ ++#!/bin/sh ++# Prefix of the output files produced by each benchmark ++ ++# if this fails, replace it with a regular name! ++Result_Prefix=$(hostname)-$(uname -m) ++# Datatype used for each memory reference. ++# Legal values are DOUBLE, CHAR, INT, FLOAT ++CB_Datatype=DOUBLE ++ ++# The number of seconds each test runs. ++CB_SecondsPerIteration=5 ++ ++# The number of times each test is run. ++CB_RepeatCount=1 ++ ++# Log base 2 of the maximum problem size tested in bytes ++CB_Memsize=29 ++ ++# The number of test sizes measured between powers of two ++CB_Resolution=2 ++ ++CBOPTS="-m $CB_Memsize -e $CB_RepeatCount -x $CB_Resolution -d $CB_SecondsPerIteration ++DATA=$CB_Datatype" ++mkdir -p results ++ ++cachebench $CBOPTS -r > results/${Result_Prefix}_cache_read.dat ++cachebench $CBOPTS -w > results/${Result_Prefix}_cache_write.dat ++cachebench $CBOPTS -b > results/${Result_Prefix}_cache_rmw.dat ++cachebench $CBOPTS -tr > results/${Result_Prefix}_cache_handread.dat ++cachebench $CBOPTS -tw > results/${Result_Prefix}_cache_handwrite.dat ++cachebench $CBOPTS -tb > results/${Result_Prefix}_cache_handrmw.dat ++cachebench $CBOPTS -s > results/${Result_Prefix}_cache_memset.dat ++cachebench $CBOPTS -p > results/${Result_Prefix}_cache_memcpy.dat ++ ++sed -e "s|TITLE|Memory Hierarchy Performance of ${Result_Prefix}|g" < /usr/share/cachebench/cachegraph.gp > results/${Result_Prefix}_cache.gp; echo "plot \"${Result_Prefix}_cache_read\" title 'read' with linespoints \\" >> results/${Result_Prefix}_cache.gp; for i in write rmw handread handwrite handrmw memset memcpy; do echo ", \"${Result_Prefix}_cache_$i.dat\" title '$i' with linespoints \\" >> results/${Result_Prefix}_cache.gp; done; ++ ++cd results; tar cf ${Result_Prefix}-cachebench-datafiles.tar ${Result_Prefix}_cache*.dat ${Result_Prefix}_cache.gp ++echo "" ++echo "Datafiles and GNUplot scripts are located in the results directory." ++echo "" +\ No newline at end of file +-- +1.7.9.5 +package/cachebench/cachebench.mk new file +30
-1@@ -0,0 +1,30 @@ +############################################################# +# +# cachebench +# +############################################################# +CACHEBENCH_VERSION = 1.11 +CACHEBENCH_SOURCE = llcbench.tar.gz +CACHEBENCH_SITE = http://icl.cs.utk.edu/projects/llcbench/ +CACHEBENCH_LICENSE = GPLv3 +CACHEBENCH_LICENSE_FILES = COPYING + +define CACHEBENCH_CONFIGURE_CMDS + $(MAKE) -C $(@D) linux-lam +endef + +define CACHEBENCH_BUILD_CMDS + $(MAKE) BB_CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" -C $(@D) cache-bench +endef + +define CACHEBENCH_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/cachebench/cachebench $(TARGET_DIR)/usr/bin/cachebench + $(INSTALL) -m 0755 -D $(@D)/cachebench/do_bench.sh $(TARGET_DIR)/usr/share/cachebench/do_bench.sh + cp $(@D)/cachebench/cachegraph.gp $(TARGET_DIR)/usr/share/cachebench/cachegraph.gp +endef + +define CACHEBENCH_UNINSTALL_TARGET_CMDS + $(RM) $(TARGET_DIR)/usr/bin/cachebench +endef + +$(eval $(generic-package)) --1.7.9.5
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 1 line
Gregory CLEMENT
PATCH 1/1 cachebench: new package
In reply to Gregory CLEMENTHi Gregory,
Le 03/08/2012 09:43, Gregory CLEMENT a ?crit :
Quoted 9 lines
This patch adds the cachebench package.
Cachebench presents itself as a program to empirically determine some parameters about an architectures memory subsystem. It can be used to have an idea of the performance of the cache support. It has been integrated into LLCbench (Low Level Characterization Benchmarks), but currently only Cachebench is supported by Buildroot. The only difference with mainline is a patch which add a script to be able to generate data ready to bu used by gnuplot without having to use 'make'
Nitpick of the day: to *be* used.
Quoted 50 lines
which is usually not present on embedded target.
Signed-off-by Gregory CLEMENT <[email protected]>--- package/Config.in | 1 + package/cachebench/Config.in | 13 ++++ ...ipt-rules-of-Makefile-to-run-it-on-target.patch | 65 ++++++++++++++++++++ package/cachebench/cachebench.mk | 30 +++++++++ 4 files changed, 109 insertions(+) create mode 100644 package/cachebench/Config.in create mode 100644 package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch create mode 100644 package/cachebench/cachebench.mkpackage/Config.in +1
-0@@ -17,6 +17,7 @@ source "package/xz/Config.in" endmenu menu "Debugging, profiling and benchmark" +source "package/cachebench/Config.in" source "package/bonnie/Config.in" source "package/dhrystone/Config.in" source "package/dstat/Config.in"package/cachebench/Config.in new file +13
-0@@ -0,0 +1,13 @@ +config BR2_PACKAGE_CACHEBENCH + bool "cachebench" + help + + Cachebench presents itself as a program to empirically determine + some parameters about an architectures memory subsystem. It can + be used to have an idea of the performance of the cache + support. It has been integrated into LLCbench (Low Level + Characterization Benchmarks), but currently only Cachebench is + supported by Buildroot. + + http://icl.cs.utk.edu/projects/llcbench/cachebench.html +package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +0
-0
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch line 8
Quoted 8 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +8
-0@@ -0,0 +1,65 @@ +From 6daded62de221ca0d97360523575b1c7230c8800 Mon Sep 17 00:00:00 2001 +From: Gregory CLEMENT <[email protected]> +Date: Thu, 2 Aug 2012 22:33:36 +0200 +Subject: [PATCH] Convert script rules of Makefile to run it on target + +The benchmark is supposed to be run using the Makefile to be able to +get data ready to be used by gnuplot. On some target we don't have +Makefile available, so this script exctracted from the Makefile can be
extracted
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch line 10
Quoted 2 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +2
-0+used directly to run the benchmark, format data and make a tarball of +the result.
Ok. Since this is not really a patch (you are adding a file that don't rely at all on existing source file from the project), why don't you just add this file to the package folder, and install it ?
But if you still want to use a patch, please use your Signed-off-by here.
Quoted 61 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +55
-0+--- + cachebench/do_bench.sh | 40 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 cachebench/do_bench.sh + +diff --git a/cachebench/do_bench.sh b/cachebench/do_bench.sh +new file mode 100644 +index 0000000..a80dcde +--- /dev/null ++++ b/cachebench/do_bench.sh +@@ -0,0 +1,40 @@ ++#!/bin/sh ++# Prefix of the output files produced by each benchmark ++ ++# if this fails, replace it with a regular name! ++Result_Prefix=$(hostname)-$(uname -m) ++# Datatype used for each memory reference. ++# Legal values are DOUBLE, CHAR, INT, FLOAT ++CB_Datatype=DOUBLE ++ ++# The number of seconds each test runs. ++CB_SecondsPerIteration=5 ++ ++# The number of times each test is run. ++CB_RepeatCount=1 ++ ++# Log base 2 of the maximum problem size tested in bytes ++CB_Memsize=29 ++ ++# The number of test sizes measured between powers of two ++CB_Resolution=2 ++ ++CBOPTS="-m $CB_Memsize -e $CB_RepeatCount -x $CB_Resolution -d $CB_SecondsPerIteration ++DATA=$CB_Datatype" ++mkdir -p results ++ ++cachebench $CBOPTS -r > results/${Result_Prefix}_cache_read.dat ++cachebench $CBOPTS -w > results/${Result_Prefix}_cache_write.dat ++cachebench $CBOPTS -b > results/${Result_Prefix}_cache_rmw.dat ++cachebench $CBOPTS -tr > results/${Result_Prefix}_cache_handread.dat ++cachebench $CBOPTS -tw > results/${Result_Prefix}_cache_handwrite.dat ++cachebench $CBOPTS -tb > results/${Result_Prefix}_cache_handrmw.dat ++cachebench $CBOPTS -s > results/${Result_Prefix}_cache_memset.dat ++cachebench $CBOPTS -p > results/${Result_Prefix}_cache_memcpy.dat ++ ++sed -e "s|TITLE|Memory Hierarchy Performance of ${Result_Prefix}|g" < /usr/share/cachebench/cachegraph.gp > results/${Result_Prefix}_cache.gp; echo "plot \"${Result_Prefix}_cache_read\" title 'read' with linespoints \\" >> results/${Result_Prefix}_cache.gp; for i in write rmw handread handwrite handrmw memset memcpy; do echo ", \"${Result_Prefix}_cache_$i.dat\" title '$i' with linespoints \\" >> results/${Result_Prefix}_cache.gp; done; ++ ++cd results; tar cf ${Result_Prefix}-cachebench-datafiles.tar ${Result_Prefix}_cache*.dat ${Result_Prefix}_cache.gp ++echo "" ++echo "Datafiles and GNUplot scripts are located in the results directory." ++echo "" +\ No newline at end of file +-- +1.7.9.5 +package/cachebench/cachebench.mk new file +0
-0
package/cachebench/cachebench.mk line 8
Quoted 8 lines
package/cachebench/cachebench.mk new file +8
-0@@ -0,0 +1,30 @@ +############################################################# +# +# cachebench +# +############################################################# +CACHEBENCH_VERSION = 1.11 +CACHEBENCH_SOURCE = llcbench.tar.gz +CACHEBENCH_SITE = http://icl.cs.utk.edu/projects/llcbench/
Hmmm, here I would call the package llcbench. But you were saying that you were building only the cachebench package, so I'm not quite sure about what to do, except build the whole tool set and not just cachebench (if it is possible?)
Maxime
Signature · 4 lines
Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 cachebench: new package
Quoted 13 lines · Maxime Ripard
Hi Gregory,
Le 03/08/2012 09:43, Gregory CLEMENT a ?crit :
Quoted 9 lines
This patch adds the cachebench package.
Cachebench presents itself as a program to empirically determine some parameters about an architectures memory subsystem. It can be used to have an idea of the performance of the cache support. It has been integrated into LLCbench (Low Level Characterization Benchmarks), but currently only Cachebench is supported by Buildroot. The only difference with mainline is a patch which add a script to be able to generate data ready to bu used by gnuplot without having to use 'make'
Quoted 1 line
Nitpick of the day: to *be* used.
I thought I was using a speller to avoid this kind of typo...
Quoted 53 lines
Quoted 53 lines
which is usually not present on embedded target.
Signed-off-by Gregory CLEMENT <[email protected]>--- package/Config.in | 1 + package/cachebench/Config.in | 13 ++++ ...ipt-rules-of-Makefile-to-run-it-on-target.patch | 65 ++++++++++++++++++++ package/cachebench/cachebench.mk | 30 +++++++++ 4 files changed, 109 insertions(+) create mode 100644 package/cachebench/Config.in create mode 100644 package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch create mode 100644 package/cachebench/cachebench.mkpackage/Config.in +1
-0@@ -17,6 +17,7 @@ source "package/xz/Config.in" endmenu menu "Debugging, profiling and benchmark" +source "package/cachebench/Config.in" source "package/bonnie/Config.in" source "package/dhrystone/Config.in" source "package/dstat/Config.in"package/cachebench/Config.in new file +13
-0@@ -0,0 +1,13 @@ +config BR2_PACKAGE_CACHEBENCH + bool "cachebench" + help + + Cachebench presents itself as a program to empirically determine + some parameters about an architectures memory subsystem. It can + be used to have an idea of the performance of the cache + support. It has been integrated into LLCbench (Low Level + Characterization Benchmarks), but currently only Cachebench is + supported by Buildroot. + + http://icl.cs.utk.edu/projects/llcbench/cachebench.html +package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +2
-0@@ -0,0 +1,65 @@ +From 6daded62de221ca0d97360523575b1c7230c8800 Mon Sep 17 00:00:00 2001 +From: Gregory CLEMENT <[email protected]>
Quoted 8 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch line 8
Quoted 6 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +6
-0+Date: Thu, 2 Aug 2012 22:33:36 +0200 +Subject: [PATCH] Convert script rules of Makefile to run it on target + +The benchmark is supposed to be run using the Makefile to be able to +get data ready to be used by gnuplot. On some target we don't have +Makefile available, so this script exctracted from the Makefile can beextracted
ok
Quoted 9 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch line 10
Quoted 3 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +2
-0+used directly to run the benchmark, format data and make a tarball of +the result.Ok. Since this is not really a patch (you are adding a file that don't rely at all on existing source file from the project), why don't you just add this file to the package folder, and install it ?
But if you still want to use a patch, please use your Signed-off-by here.
Indeed using a file should be better.
Quoted 67 lines
Quoted 67 lines
package/cachebench/cachebench-0001-Convert-script-rules-of-Makefile-to-run-it-on-target.patch new file +55
-0+--- + cachebench/do_bench.sh | 40 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 cachebench/do_bench.sh + +diff --git a/cachebench/do_bench.sh b/cachebench/do_bench.sh +new file mode 100644 +index 0000000..a80dcde +--- /dev/null ++++ b/cachebench/do_bench.sh +@@ -0,0 +1,40 @@ ++#!/bin/sh ++# Prefix of the output files produced by each benchmark ++ ++# if this fails, replace it with a regular name! ++Result_Prefix=$(hostname)-$(uname -m) ++# Datatype used for each memory reference. ++# Legal values are DOUBLE, CHAR, INT, FLOAT ++CB_Datatype=DOUBLE ++ ++# The number of seconds each test runs. ++CB_SecondsPerIteration=5 ++ ++# The number of times each test is run. ++CB_RepeatCount=1 ++ ++# Log base 2 of the maximum problem size tested in bytes ++CB_Memsize=29 ++ ++# The number of test sizes measured between powers of two ++CB_Resolution=2 ++ ++CBOPTS="-m $CB_Memsize -e $CB_RepeatCount -x $CB_Resolution -d $CB_SecondsPerIteration ++DATA=$CB_Datatype" ++mkdir -p results ++ ++cachebench $CBOPTS -r > results/${Result_Prefix}_cache_read.dat ++cachebench $CBOPTS -w > results/${Result_Prefix}_cache_write.dat ++cachebench $CBOPTS -b > results/${Result_Prefix}_cache_rmw.dat ++cachebench $CBOPTS -tr > results/${Result_Prefix}_cache_handread.dat ++cachebench $CBOPTS -tw > results/${Result_Prefix}_cache_handwrite.dat ++cachebench $CBOPTS -tb > results/${Result_Prefix}_cache_handrmw.dat ++cachebench $CBOPTS -s > results/${Result_Prefix}_cache_memset.dat ++cachebench $CBOPTS -p > results/${Result_Prefix}_cache_memcpy.dat ++ ++sed -e "s|TITLE|Memory Hierarchy Performance of ${Result_Prefix}|g" < /usr/share/cachebench/cachegraph.gp > results/${Result_Prefix}_cache.gp; echo "plot \"${Result_Prefix}_cache_read\" title 'read' with linespoints \\" >> results/${Result_Prefix}_cache.gp; for i in write rmw handread handwrite handrmw memset memcpy; do echo ", \"${Result_Prefix}_cache_$i.dat\" title '$i' with linespoints \\" >> results/${Result_Prefix}_cache.gp; done; ++ ++cd results; tar cf ${Result_Prefix}-cachebench-datafiles.tar ${Result_Prefix}_cache*.dat ${Result_Prefix}_cache.gp ++echo "" ++echo "Datafiles and GNUplot scripts are located in the results directory." ++echo "" +\ No newline at end of file +-- +1.7.9.5 +package/cachebench/cachebench.mk new file +5
-0@@ -0,0 +1,30 @@ +############################################################# +# +# cachebench +# +#############################################################
Quoted 8 lines
package/cachebench/cachebench.mk line 8
Quoted 3 lines
package/cachebench/cachebench.mk new file +3
-0+CACHEBENCH_VERSION = 1.11 +CACHEBENCH_SOURCE = llcbench.tar.gz +CACHEBENCH_SITE = http://icl.cs.utk.edu/projects/llcbench/Hmmm, here I would call the package llcbench. But you were saying that you were building only the cachebench package, so I'm not quite sure about what to do, except build the whole tool set and not just cachebench (if it is possible?)
The 3 programs included in LLCBench share a kind of common configuration file, but each one have to be compiled separately.
I think we could create a LLCBench and inside this menu select the benchmark we want. Why not. But I won't be bale to tell it the binaries (other than cachebench) built will run as expected
Quoted 3 lines
Maxime
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com