AX.25 Packet Radio on a RaspBerry Pi : a success

Hello all,

I succeeded the compilation of a dedicated Raspbian 3.1.9+ kernel with

Quoted 4 lines · Bernard Pidoux

Hello all,

I succeeded the compilation of a dedicated Raspbian 3.1.9+ kernel with

Very nice Bernard. This is good inspiration :) I have two Raspberries for another project, but now I must re-prioritize and assign one for ham usage ;-)

73, PE1ICQ

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Amazing! Has anyone managed to run soundmodem inside r-Pi?

Quoted 12 lines · Arno Verhoeven

Quoted 4 lines · Bernard Pidoux

Hello all,

I succeeded the compilation of a dedicated Raspbian 3.1.9+ kernel with

Very nice Bernard. This is good inspiration :) I have two Raspberries for another project, but now I must re-prioritize and assign one for ham usage ;-)

73, PE1ICQ

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process. I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 47 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 71 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 53 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Paul,
I am using the FPAC node. It is based on the ROSE protocol,
but works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 81 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 71 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 47 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.
9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Ok Charles

I think I would be the only node in the UK using Frac on this test system :(
Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 95 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol,
but works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 86 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 76 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 51 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack,
netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello Paul,

A deb package for Raspberry Pi should be available in a reasonable delay (...)
Meanwhile, Charley k4gbb has come with a very convenient online html document to start AX.25 installation on your RPi.

http://k4gbb.no-ip.info/docs/Raspberry.html

73 de Bernard, f6bvp

Quoted 105 lines · Paul Lewis

Ok Charles

I think I would be the only node in the UK using Frac on this test system :(
Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 95 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol,
but works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 86 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 76 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 51 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack,
netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Ok Charles

I think I would be the only node in the UK using Frac on this test system :( Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 37 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol, but
works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 28 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 19 lines

One suggestion before executing ./Instax25.new script I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 6 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

Quoted 4 lines

Quoted 4 lines

Quoted 4 lines

Quoted 4 lines

9.080312.ax25+-10.00.Custom_armhf.deb

Quoted 8 lines

Quoted 8 lines

Quoted 8 lines

Quoted 8 lines

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

Quoted 39 lines

Quoted 39 lines

Quoted 39 lines

Quoted 38 lines

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_arm hf.deb

Edit /boot/config.txt and add a line at the end with # for more options see http://elinux.org/RPi_config.txt kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf sudo wget
http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Quoted 5 lines

Quoted 5 lines

Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello,

Fine job everybody did.
I'll try it in a few .... months.
But this morning Charles's link :
http://k4gbb.no-ip.info/docs/Raspberry.html
Seems not working. May be address has been changed ?

Best 73 Michel F3KT

-----Message d'origine-----
De : Bernard Pidoux [mailto:[email protected]]
Envoyé : mardi 4 septembre 2012 23:02
À : Paul Lewis
Cc : C Schuman; f6bvp; List for the LINUX version of FBB; Alejandro Santos; Arno Verhoeven; Lee Woldanski; F3KT; linux-hams
Objet : Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hello Paul,

A deb package for Raspberry Pi should be available in a reasonable delay (...)
Meanwhile, Charley k4gbb has come with a very convenient online html document to start AX.25 installation on your RPi.

http://k4gbb.no-ip.info/docs/Raspberry.html

73 de Bernard, f6bvp

Quoted 45 lines · Paul Lewis

Ok Charles

I think I would be the only node in the UK using Frac on this test system :( Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 37 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol, but
works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 28 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 19 lines

One suggestion before executing ./Instax25.new script I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 6 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

Quoted 6 lines

Quoted 6 lines

Quoted 6 lines

Quoted 6 lines

Quoted 6 lines

9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

Quoted 5 lines

Quoted 5 lines

Quoted 5 lines

Quoted 5 lines

Quoted 5 lines

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

Quoted 41 lines

Quoted 41 lines

Quoted 41 lines

Quoted 41 lines

Quoted 31 lines

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_arm hf.deb

Edit /boot/config.txt and add a line at the end with # for more options see http://elinux.org/RPi_config.txt kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf sudo wget
http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello,

Fine job everybody did.
I'll try it in a few .... months.
But this morning Charles's link :
http://k4gbb.no-ip.info/docs/Raspberry.html
Seems not working. May be address has been changed ?

Best 73 Michel F3KT

-----Message d'origine-----
De : Bernard Pidoux [mailto:[email protected]]
Envoyé : mardi 4 septembre 2012 23:02
À : Paul Lewis
Cc : C Schuman; f6bvp; List for the LINUX version of FBB; Alejandro Santos; Arno Verhoeven; Lee Woldanski; F3KT; linux-hams
Objet : Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hello Paul,

A deb package for Raspberry Pi should be available in a reasonable delay (...)
Meanwhile, Charley k4gbb has come with a very convenient online html document to start AX.25 installation on your RPi.

http://k4gbb.no-ip.info/docs/Raspberry.html

73 de Bernard, f6bvp

Hello all,

K4GBB's Raspberry site is back on line with more details and updated information.
Thank you Charley for providing such help !

73 de Bernard, f6bvp

Ok Charles

I think I would be the only node in the UK using Frac on this test system :(
Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 95 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol,
but works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 86 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 76 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 57 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack,
netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 4 lines

To unsubscribe from this list: send the line "unsubscribe
linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

That is the beauty of FPAC..
It fits into any local network and interfaces Globally.
I link with BPQ nodes and support several other service with one Server.

If you can get a hold of the source code you should be able to compile it. I've done this with the Sheeva Plug and the RPi.

<<Charley>>
k4gbb

Quoted 105 lines · Paul Lewis

Ok Charles

I think I would be the only node in the UK using Frac on this test system :(
Another learning curve and challenge..
73 Paul g4apl

In message <[email protected]>, C Schuman <[email protected]> writes

Quoted 95 lines

Paul,
I am using the FPAC node. It is based on the ROSE protocol,
but works well with NetRom and Flex Net. We have approx 40 ROSE nodes linked together via AxUDP.

<<Charley>>
k4gbb

Quoted 86 lines · Paul Lewis

Hello All

Thanks Bernard and Charles.

Is there a NODE package for the "Pi" as I have used node(3.3) for a decade now. On my main system.
73 de Paul g4apl

In message <[email protected]>, f6bvp <[email protected]> writes

Quoted 76 lines

One suggestion before executing ./Instax25.new script
I noticed that /tmp partition was too small and could be full aborting some installation process.
I suggest to unmount this partition :

sudo umount -l /tmp

A /tmp file will remain however and will do it.

73 de Bernard, f6bvp

Quoted 51 lines · On 04/08/2012 14:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack,
netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.

9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 6 lines

I may have missed some details.

73 de Bernard, f6bvp
_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello Charles and the others

your feedback is noticed.

Yes I do have the source code that I could ftp across and compile.

Also your RMS gate on a Raspberry Pi has come up now..

Thanks for the support and feedback
Paul g4apl

Hi Gays

Thought I would give and update
Have now got the system running as a linuxnode.
Have not switch on the radio yet connected to a usb serial port AX25IPD Ax25 and netrom connections work.
Telnet to the linuxnode from on the local machine

net44 IP over AX25UDP does not work.
I have never got this working on my partners when they upgraded to the 2.6 kernels and the associated ax25ipd during the last decade. So this problem has caught up with me again..

Works fine on my 2.2.26 kernel the version of ax25ipd that I am using ax25-apps-0.0.6.2src_f6bvp.tar (installed 4.6.2007)

Will provide feedback in a new thread.

Encounter one gotcha though, that got me going for a couple of days. Was the netrom interfaces were always in use and the nrrattach fails, no spare netrom device.
Also the ttyUSB0 interface was 'grab by the system'

Confirmed netrom, ax25, mkiss modules loaded
the required alias defined the /etc/modprobe.d
conf files.

See these referenced during the system boot and message log file.

Traced (ps -ef) to the /etc/default/ifplugd hotplug deamon that auto connects 'by default' all interfaces.
Change the attribute HOTPLUG INTERFACES="all" to "lo eth0"

and we got control of the system and nrrattach now worked. 73 Paul g4apl (gb7cip)

In message <[email protected]>, Paul Lewis <[email protected]> writes

Quoted 14 lines

Hello Charles and the others

your feedback is noticed.

Yes I do have the source code that I could ftp across and compile.

Also your RMS gate on a Raspberry Pi has come up now..

Thanks for the support and feedback
Paul g4apl

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]> Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 42 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

Quoted 8 lines

I may have missed some details.

73 de Bernard, f6bvp
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Hello Remy,

I never used soundmodem for I have been a happy user of two 9612+ dual channel TNCs for years.

However, with RPi there are no serial port and I guess I will have to use either an USB to serial adapter or soundmodem.

Meanwhile installing soundmodem performed well.

root@raspberrypi:/home/pi# apt-get install soundmodem
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
  libaudiofile1 libhamlib2
Les NOUVEAUX paquets suivants seront installés :
  libaudiofile1 libhamlib2 soundmodem
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à jour.
Il est nécessaire de prendre 718 ko dans les archives.
Après cette opération, 3 131 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer [O/n] ? O
Réception de : 1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libaudiofile1 armhf 0.3.4-1 [86,9 kB]
Réception de : 2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhamlib2 armhf 1.2.15.1-1 [467 kB]
Réception de : 3 http://mirrordirector.raspbian.org/raspbian/ wheezy/main soundmodem armhf 0.16-1 [164 kB]
718 ko réceptionnés en 3s (214 ko/s)
Sélection du paquet libaudiofile1:armhf précédemment désélectionné.
(Lecture de la base de données... 58368 fichiers et répertoires déjà installés.)
Dépaquetage de libaudiofile1:armhf (à partir de .../libaudiofile1_0.3.4-1_armhf.deb) ...
Sélection du paquet libhamlib2 précédemment désélectionné.
Dépaquetage de libhamlib2 (à partir de .../libhamlib2_1.2.15.1-1_armhf.deb) ...
Sélection du paquet soundmodem précédemment désélectionné.
Dépaquetage de soundmodem (à partir de .../soundmodem_0.16-1_armhf.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libaudiofile1:armhf (0.3.4-1) ...
Paramétrage de libhamlib2 (1.2.15.1-1) ...
Paramétrage de soundmodem (0.16-1) ...
root@raspberrypi:/home/pi#

Now I will need to read the doc or get some direct help to set up a starting script.

73 de Bernard, f6bvp

Quoted 78 lines · On 07/08/2012 00:59, [email protected] wrote:

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]> Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 53 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 3 lines

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Hello Remy,

I never used soundmodem for I have been a happy user of two 9612+ dual channel TNCs for years.

However, with RPi there are no serial port and I guess I will have to use either an USB to serial adapter or soundmodem.

Meanwhile installing soundmodem performed well.

root@raspberrypi:/home/pi# apt-get install soundmodem
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
  libaudiofile1 libhamlib2
Les NOUVEAUX paquets suivants seront installés :
  libaudiofile1 libhamlib2 soundmodem
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à jour.
Il est nécessaire de prendre 718 ko dans les archives.
Après cette opération, 3 131 ko d'espace disque supplémentaires seront 
utilisés.
Souhaitez-vous continuer [O/n] ? O
Réception de : 1 http://mirrordirector.raspbian.org/raspbian/ 
wheezy/main libaudiofile1 armhf 0.3.4-1 [86,9 kB]
Réception de : 2 http://mirrordirector.raspbian.org/raspbian/ 
wheezy/main libhamlib2 armhf 1.2.15.1-1 [467 kB]
Réception de : 3 http://mirrordirector.raspbian.org/raspbian/ 
wheezy/main soundmodem armhf 0.16-1 [164 kB]
718 ko réceptionnés en 3s (214 ko/s)
Sélection du paquet libaudiofile1:armhf précédemment désélectionné.
(Lecture de la base de données... 58368 fichiers et répertoires déjà 
installés.)
Dépaquetage de libaudiofile1:armhf (à partir de 
.../libaudiofile1_0.3.4-1_armhf.deb) ...
Sélection du paquet libhamlib2 précédemment désélectionné.
Dépaquetage de libhamlib2 (à partir de 
.../libhamlib2_1.2.15.1-1_armhf.deb) ...
Sélection du paquet soundmodem précédemment désélectionné.
Dépaquetage de soundmodem (à partir de 
.../soundmodem_0.16-1_armhf.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libaudiofile1:armhf (0.3.4-1) ...
Paramétrage de libhamlib2 (1.2.15.1-1) ...
Paramétrage de soundmodem (0.16-1) ...
root@raspberrypi:/home/pi#

Now I will need to read the doc or get some direct help to set up a starting script.

73 de Bernard, f6bvp

Quoted 84 lines · On 07/08/2012 00:59, [email protected] wrote:

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]>
Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 54 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 4 lines

To unsubscribe from this list: send the line "unsubscribe 
linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 3 lines

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Hi All,

Some help about Soundmodem is available here:

http://www.xastir.org/wiki/HowTo:SoundModem

Push-to-talk can be activated with Soundmodem original method but also with the very convenient hamlib library ( http://sourceforge.net/apps/mediawiki/hamlib/index.php?title=Main_Page )

Hamlib is used by fldigi on Raslberry , therefore it is seriously supported.

----- Mail original -----
De: "Ray Wells" <[email protected]>
À: "f6bvp" <[email protected]>
Cc: "remi chateauneu" <[email protected]>, "List for the LINUX version of FBB" <[email protected]>, "Arno Verhoeven" <[email protected]>, "Alejandro Santos" <[email protected]>, "linux-hams" <[email protected]>, "Bernard Pidoux" <[email protected]> Envoyé: Mardi 7 Août 2012 10:16:31
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Bernard, Remy, All,

Now that I have Bernard's kernel loaded on my RPi, and I have a Linux compatible USB soundcard (Behringer UCA202), I will try to get it working with soundmodem by Saturday or Sunday and report back.

Ray vk2tv

Quoted 137 lines · On 07/08/12 18:03, f6bvp wrote:

Hello Remy,

I never used soundmodem for I have been a happy user of two 9612+ dual channel TNCs for years.

However, with RPi there are no serial port and I guess I will have to use either an USB to serial adapter or soundmodem.

Meanwhile installing soundmodem performed well.

root@raspberrypi:/home/pi# apt-get install soundmodem
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
   libaudiofile1 libhamlib2
Les NOUVEAUX paquets suivants seront installés :
   libaudiofile1 libhamlib2 soundmodem
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à jour.
Il est nécessaire de prendre 718 ko dans les archives.
Après cette opération, 3 131 ko d'espace disque supplémentaires seront
utilisés.
Souhaitez-vous continuer [O/n] ? O
Réception de : 1 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libaudiofile1 armhf 0.3.4-1 [86,9 kB]
Réception de : 2 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libhamlib2 armhf 1.2.15.1-1 [467 kB]
Réception de : 3 http://mirrordirector.raspbian.org/raspbian/
wheezy/main soundmodem armhf 0.16-1 [164 kB]
718 ko réceptionnés en 3s (214 ko/s)
Sélection du paquet libaudiofile1:armhf précédemment désélectionné.
(Lecture de la base de données... 58368 fichiers et répertoires déjà
installés.)
Dépaquetage de libaudiofile1:armhf (à partir de
.../libaudiofile1_0.3.4-1_armhf.deb) ...
Sélection du paquet libhamlib2 précédemment désélectionné.
Dépaquetage de libhamlib2 (à partir de
.../libhamlib2_1.2.15.1-1_armhf.deb) ...
Sélection du paquet soundmodem précédemment désélectionné.
Dépaquetage de soundmodem (à partir de
.../soundmodem_0.16-1_armhf.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libaudiofile1:armhf (0.3.4-1) ...
Paramétrage de libhamlib2 (1.2.15.1-1) ...
Paramétrage de soundmodem (0.16-1) ...
root@raspberrypi:/home/pi#

Now I will need to read the doc or get some direct help to set up a starting script.

73 de Bernard, f6bvp

Quoted 83 lines · On 07/08/2012 00:59, [email protected] wrote:

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]>
Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 54 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 4 lines

To unsubscribe from this list: send the line "unsubscribe
linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 8 lines

Quoted 3 lines

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

All,

I'll start by saying that my "shack" is very user unfriendly at the moment, with nowhere to set up test equipment or radios, however, I have managed to decode ax25 (aprs) packets using soundmodem on the Raspberry Pi running Bernard's kernel. Soundmodem is unstable and crashes but that may be due to the Behringer UCA202 sound card I'm using. Others have reported difficulties with the UCA202 in RPi with audio applications and, I haven't yet delved into the sound card configs except to delete a blacklist entry in /etc/modeprobe.d to get the sound card to accept incoming audio. My tests have been very raw but have confirmed that using a USB sound card with soundmodem on the RPi appears feasible. On tx, I used speaker monitoring of the tx audio as an indication of success. What I heard "sounded" correct for 1k2 packet.

I will, as time permits, try to make more meaningful tests.

Ray vk2tv

Quoted 174 lines · On 08/08/12 22:10, [email protected] wrote:

Hi All,

Some help about Soundmodem is available here:

http://www.xastir.org/wiki/HowTo:SoundModem

Push-to-talk can be activated with Soundmodem original method but also with the very convenient hamlib library ( http://sourceforge.net/apps/mediawiki/hamlib/index.php?title=Main_Page )

Hamlib is used by fldigi on Raslberry , therefore it is seriously supported.

----- Mail original -----
De: "Ray Wells" <[email protected]>
À: "f6bvp" <[email protected]>
Cc: "remi chateauneu" <[email protected]>, "List for the LINUX version of FBB" <[email protected]>, "Arno Verhoeven" <[email protected]>, "Alejandro Santos" <[email protected]>, "linux-hams" <[email protected]>, "Bernard Pidoux" <[email protected]> Envoyé: Mardi 7 Août 2012 10:16:31
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Bernard, Remy, All,

Now that I have Bernard's kernel loaded on my RPi, and I have a Linux compatible USB soundcard (Behringer UCA202), I will try to get it working with soundmodem by Saturday or Sunday and report back.

Ray vk2tv

Quoted 148 lines · On 07/08/12 18:03, f6bvp wrote:

Hello Remy,

I never used soundmodem for I have been a happy user of two 9612+ dual channel TNCs for years.

However, with RPi there are no serial port and I guess I will have to use either an USB to serial adapter or soundmodem.

Meanwhile installing soundmodem performed well.

root@raspberrypi:/home/pi# apt-get install soundmodem
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
   libaudiofile1 libhamlib2
Les NOUVEAUX paquets suivants seront installés :
   libaudiofile1 libhamlib2 soundmodem
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à jour.
Il est nécessaire de prendre 718 ko dans les archives.
Après cette opération, 3 131 ko d'espace disque supplémentaires seront
utilisés.
Souhaitez-vous continuer [O/n] ? O
Réception de : 1 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libaudiofile1 armhf 0.3.4-1 [86,9 kB]
Réception de : 2 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libhamlib2 armhf 1.2.15.1-1 [467 kB]
Réception de : 3 http://mirrordirector.raspbian.org/raspbian/
wheezy/main soundmodem armhf 0.16-1 [164 kB]
718 ko réceptionnés en 3s (214 ko/s)
Sélection du paquet libaudiofile1:armhf précédemment désélectionné.
(Lecture de la base de données... 58368 fichiers et répertoires déjà
installés.)
Dépaquetage de libaudiofile1:armhf (à partir de
.../libaudiofile1_0.3.4-1_armhf.deb) ...
Sélection du paquet libhamlib2 précédemment désélectionné.
Dépaquetage de libhamlib2 (à partir de
.../libhamlib2_1.2.15.1-1_armhf.deb) ...
Sélection du paquet soundmodem précédemment désélectionné.
Dépaquetage de soundmodem (à partir de
.../soundmodem_0.16-1_armhf.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libaudiofile1:armhf (0.3.4-1) ...
Paramétrage de libhamlib2 (1.2.15.1-1) ...
Paramétrage de soundmodem (0.16-1) ...
root@raspberrypi:/home/pi#

Now I will need to read the doc or get some direct help to set up a starting script.

73 de Bernard, f6bvp

Quoted 89 lines · On 07/08/2012 00:59, [email protected] wrote:

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]>
Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 44 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries, tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Quoted 13 lines

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp

Signature · 4 lines

To unsubscribe from this list: send the line "unsubscribe
linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 5 lines

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

I'm controlling RPi remotely using VNC to provide access to the desktop. tightvncserver is consuming about 25% cpu and soundmodem about 74%. The result is that cpu load is flat lined at maximum. However, soundmodem and RPi appear stable. Ultimately I'll run without the desktop but for now it's essential to ongoing testing.

All,

A little more information based on a bit of unscientific testing today of RPi with soundmodem.

Yesterday I reported that sm was unstable and locked up randomly. I now believe that this may have been a power supply issue. The power supply used (mobile phone) was rated at 700mA, the recommended minimum capacity for RPi. The 7 port hub that the UCA202 sound card connected to had its own 2000mA supply.

Today, I tried running the UCA202 directly from the RPi. The UCA202 is rated at 100mA, the supposed load capability of RPi. I didn't manage to decode any packets and, upon tx, sm appeared to lock up.

My next step was to put the UCA202 back onto the USB hub and to supply the RPi from the 2000mA supply. The result is that sm has been decoding packets for well over an hour (at the time of writing this) and will happily tx without lock up. It would indeed appear that an adequate power supply is an essential component for RPi.

I'm controlling RPi remotely using VNC to provide access to the desktop. tightvncserver is consuming about 25% cpu and soundmodem about 74%. The result is that cpu load is flat lined at maximum. However, soundmodem and RPi appear stable. Ultimately I'll run without the desktop but for now it's essential to ongoing testing.

More to follow, I'm sure.

Ray, vk2tv

Quoted 218 lines · Ray Wells

All,

I'll start by saying that my "shack" is very user unfriendly at the moment, with nowhere to set up test equipment or radios, however, I have managed to decode ax25 (aprs) packets using soundmodem on the Raspberry Pi running Bernard's kernel. Soundmodem is unstable and crashes but that may be due to the Behringer UCA202 sound card I'm using. Others have reported difficulties with the UCA202 in RPi with audio applications and, I haven't yet delved into the sound card configs except to delete a blacklist entry in /etc/modeprobe.d to get the sound card to accept incoming audio. My tests have been very raw but have confirmed that using a USB sound card with soundmodem on the RPi appears feasible. On tx, I used speaker monitoring of the tx audio as an indication of success. What I heard "sounded" correct for 1k2 packet.

I will, as time permits, try to make more meaningful tests.

Ray vk2tv

Quoted 186 lines · On 08/08/12 22:10, [email protected] wrote:

Hi All,

Some help about Soundmodem is available here:

http://www.xastir.org/wiki/HowTo:SoundModem

Push-to-talk can be activated with Soundmodem original method but also with the very convenient hamlib library (
http://sourceforge.net/apps/mediawiki/hamlib/index.php?title=Main_Page )

Hamlib is used by fldigi on Raslberry , therefore it is seriously supported.

----- Mail original -----
De: "Ray Wells" <[email protected]>
À: "f6bvp" <[email protected]>
Cc: "remi chateauneu" <[email protected]>, "List for the LINUX version of FBB" <[email protected]>, "Arno Verhoeven" <[email protected]>, "Alejandro Santos" <[email protected]>, "linux-hams" <[email protected]>, "Bernard Pidoux" <[email protected]>
Envoyé: Mardi 7 Août 2012 10:16:31
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Bernard, Remy, All,

Now that I have Bernard's kernel loaded on my RPi, and I have a Linux compatible USB soundcard (Behringer UCA202), I will try to get it working with soundmodem by Saturday or Sunday and report back.

Ray vk2tv

Quoted 144 lines · On 07/08/12 18:03, f6bvp wrote:

Hello Remy,

I never used soundmodem for I have been a happy user of two 9612+ dual channel TNCs for years.

However, with RPi there are no serial port and I guess I will have to use either an USB to serial adapter or soundmodem.

Meanwhile installing soundmodem performed well.

root@raspberrypi:/home/pi# apt-get install soundmodem
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
   libaudiofile1 libhamlib2
Les NOUVEAUX paquets suivants seront installés :
   libaudiofile1 libhamlib2 soundmodem
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à
jour.
Il est nécessaire de prendre 718 ko dans les archives.
Après cette opération, 3 131 ko d'espace disque supplémentaires seront
utilisés.
Souhaitez-vous continuer [O/n] ? O
Réception de : 1 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libaudiofile1 armhf 0.3.4-1 [86,9 kB]
Réception de : 2 http://mirrordirector.raspbian.org/raspbian/
wheezy/main libhamlib2 armhf 1.2.15.1-1 [467 kB]
Réception de : 3 http://mirrordirector.raspbian.org/raspbian/
wheezy/main soundmodem armhf 0.16-1 [164 kB]
718 ko réceptionnés en 3s (214 ko/s)
Sélection du paquet libaudiofile1:armhf précédemment désélectionné.
(Lecture de la base de données... 58368 fichiers et répertoires déjà
installés.)
Dépaquetage de libaudiofile1:armhf (à partir de
.../libaudiofile1_0.3.4-1_armhf.deb) ...
Sélection du paquet libhamlib2 précédemment désélectionné.
Dépaquetage de libhamlib2 (à partir de
.../libhamlib2_1.2.15.1-1_armhf.deb) ...
Sélection du paquet soundmodem précédemment désélectionné.
Dépaquetage de soundmodem (à partir de
.../soundmodem_0.16-1_armhf.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de libaudiofile1:armhf (0.3.4-1) ...
Paramétrage de libhamlib2 (1.2.15.1-1) ...
Paramétrage de soundmodem (0.16-1) ...
root@raspberrypi:/home/pi#

Now I will need to read the doc or get some direct help to set up a starting script.

73 de Bernard, f6bvp

Quoted 89 lines · On 07/08/2012 00:59, [email protected] wrote:

Did you try to run soundmodem on Raspberry, please ?

----- Mail original -----
De: "Ray Wells"<[email protected]>
À: "f6bvp"<[email protected]>
Cc: "List for the LINUX version of FBB"<[email protected]>, "Arno Verhoeven"<[email protected]>, "C Schuman"<[email protected]>, "Lee Woldanski"<[email protected]>, "F3KT"<[email protected]>, "Alejandro Santos"<[email protected]>, "linux-hams"<[email protected]>, "Bernard Pidoux"<[email protected]>
Envoyé: Samedi 4 Août 2012 23:59:49
Objet: Re: [xfbb] AX.25 Packet Radio on a RaspBerry Pi : a success

Hi Bernard, All,

This is great news because I almost wrote to you yesterday to ask if you
had made a .deb package for your kernel.

My two Raspberry Pi's arrived on Friday (I was told 5 weeks and they arrived in 5 days from Element 14!) and I'm gathering the hardware I need to get one of them up and running with kernel ax25. One will serve
as my aprs gateway machine and maybe a fpac node again.

Ray vk2tv

Quoted 58 lines · On 04/08/12 22:21, f6bvp wrote:

Hello all,

This is my first debian package !

http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

This is the raspbian kernel image including AX.25 modules (ax25, 6pack, netrom, rose, mkiss,...)

From your RaspBerry Pi you can download it with wget

wget
http://f6bvp.free.fr/logiciels/ax25/linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

To install it :
sudo dpkg -i linux-image-3.1.9.080312.ax25+_3.1.9.080312.ax25+-10.00.Custom_armhf.deb

Edit /boot/config.txt and add a line at the end with

# for more options see http://elinux.org/RPi_config.txt
kernel vmlinuz-3.1.9.080312.ax25+

reboot

Then download K4GBB install ax25 script for installing ax25 libraries,
tools and apps.

sudo wget http://f6bvp.free.fr/logiciels/ax25/Instax25.new
sudo chmod +x Instax25.new
./Instax25.new

You may download a sample ax25 device init script :
sudo wget http://f6bvp.free.fr/logiciels/ax25/rc.ax25

and a sample /etc/ax25/ax25ipd.conf
sudo wget http://f6bvp.free.fr/logiciels/ax25/ax25ipd.conf

Then you also need to edit /etc/ax25/axports such this example :
sudo wget http://f6bvp.free.fr/logiciels/ax25/axports

I may have missed some details.

73 de Bernard, f6bvp
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 9 lines

Quoted 3 lines

_______________________________________________
xfbb maillist - [email protected]
http://mailman.f6fbb.org/mailman/listinfo/xfbb

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html