MX28: Add SchulerControl SC_SPS_1 platform

PATCH New Marek Vasut 3 participants 9 messages Aug 1, 2012 – Aug 7, 2012

lore

Share & tools

lore

Marek Vasut

author

2012-08-01 13:14 UTC #0 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs

Signed-off-by Marek Vasut <[email protected]>

Cc Detlev Zundel <[email protected]>

---
 board/schulercontrol/sc_sps_1/Makefile   |   47 +++++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c |  113 ++++++++++++++++
 board/schulercontrol/sc_sps_1/spl_boot.c |  165 ++++++++++++++++++++++++
 board/schulercontrol/sc_sps_1/u-boot.bd  |   14 ++
 boards.cfg                               |    1 +
 include/configs/sc_sps_1.h               |  208 ++++++++++++++++++++++++++++++
 6 files changed, 548 insertions(+)
 create mode 100644 board/schulercontrol/sc_sps_1/Makefile
 create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
 create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
 create mode 100644 board/schulercontrol/sc_sps_1/u-boot.bd
 create mode 100644 include/configs/sc_sps_1.h

board/schulercontrol/sc_sps_1/Makefile new file +47 -0

new file mode 100644
index 0000000..24a1003
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2012
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+ifndef	CONFIG_SPL_BUILD
+COBJS	:= sc_sps_1.o
+else
+COBJS	:= spl_boot.o
+endif
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/schulercontrol/sc_sps_1/sc_sps_1.c new file +113 -0

113 lines not on this page · raw message

board/schulercontrol/sc_sps_1/spl_boot.c new file +165 -0

165 lines not on this page · raw message

board/schulercontrol/sc_sps_1/u-boot.bd new file +14 -0

new file mode 100644
index 0000000..c60615a
@@ -0,0 +1,14 @@
+sources {
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
+}
+
+section (0) {
+	load u_boot_spl > 0x0000;
+	load ivt (entry = 0x0014) > 0x8000;
+	hab call 0x8000;
+
+	load u_boot > 0x40000100;
+	load ivt (entry = 0x40000100) > 0x8000;
+	hab call 0x8000;
+}

boards.cfg +1 -0

index 1af87c0..b10b870 100644
@@ -172,6 +172,7 @@ imx27lite                    arm         arm926ejs   imx27lite           logicpd
 magnesium                    arm         arm926ejs   imx27lite           logicpd        mx27
 m28evk                       arm         arm926ejs   -                   denx           mx28
 mx28evk                      arm         arm926ejs   -                   freescale      mx28
+sc_sps_1                     arm         arm926ejs   -                   schulercontrol mx28
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
 omap5912osk                  arm         arm926ejs   -                   ti             omap

include/configs/sc_sps_1.h new file +208 -0

208 lines not on this page · raw message

Signature · 1 line

1.7.10.4

Marek Vasut

author

2012-08-01 13:42 UTC #1 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

CC Stefano:

Quoted 9 lines

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs
Signed-off-by Marek Vasut <[email protected]>
Cc Detlev Zundel <[email protected]>

[..]

Best regards,
Marek Vasut

Detlev Zundel

2012-08-03 11:56 UTC #2 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

In reply to Marek Vasut

Hi Marek,

Quoted 9 lines

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs
Signed-off-by Marek Vasut <[email protected]>
Cc Detlev Zundel <[email protected]>

Acked-by Detlev Zundel <[email protected]>

Cheers
Detlev

Signature · 8 lines

ike|abel - Eine Partnerschaft erweist sich als ikeabel, wenn ein samst?glicher
Besuch bei Ikea  weder zur sofortigen Trennung noch zu tagelangen Diskussionen
f?hrt.  In einigen urbanen Subkulturen hat der gemeinsame Ikea-Besuch die Ver-
lobung vollst?ndig ersetzt.            -- "Wortschatz" v. Sascha Lobo
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

Stefano Babic

2012-08-05 07:27 UTC #3 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

In reply to Marek Vasut

Quoted 7 lines · Marek Vasut

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs

Hi Marek,

Quoted 301 lines

(quoted diff) +1 -0

+#########################################################################

board/schulercontrol/sc_sps_1/sc_sps_1.c new file +113 -0

new file mode 100644
index 0000000..0fee289
@@ -0,0 +1,113 @@
+/*
+ * SchulerControl GmbH, SC_SPS_1 module
+ *
+ * Copyright (C) 2012 Marek Vasut <[email protected]>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+	/* IO0 clock at 480MHz */
+	mx28_set_ioclk(MXC_IOCLK0, 480000);
+	/* IO1 clock at 480MHz */
+	mx28_set_ioclk(MXC_IOCLK1, 480000);
+
+	/* SSP0 clock at 96MHz */
+	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
+	/* SSP2 clock at 96MHz */
+	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+
+#ifdef	CONFIG_CMD_USB
+	mxs_iomux_setup_pad(MX28_PAD_AUART1_CTS__USB0_OVERCURRENT);
+	mxs_iomux_setup_pad(MX28_PAD_AUART2_TX__GPIO_3_9 |
+			MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL);
+	gpio_direction_output(MX28_PAD_AUART2_TX__GPIO_3_9, 1);
+#endif
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	return mx28_dram_init();
+}
+
+#ifdef	CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	return mxsmmc_initialize(bis, 0, NULL);
+}
+#endif
+
+#ifdef	CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	struct mx28_clkctrl_regs *clkctrl_regs =
+		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	int ret;
+
+	ret = cpu_eth_init(bis);
+
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+		CLKCTRL_ENET_TIME_SEL_MASK,
+		CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN);
+
+	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+	if (ret) {
+		printf("FEC MXS: Unable to init FEC0\n");
+		return ret;
+	}
+
+	ret = fecmxc_initialize_multi(bis, 1, 1, MXS_ENET1_BASE);
+	if (ret) {
+		printf("FEC MXS: Unable to init FEC1\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+#endif

board/schulercontrol/sc_sps_1/spl_boot.c new file +165 -0

new file mode 100644
index 0000000..4d2151d
@@ -0,0 +1,165 @@
+/*
+ * SchulerControl GmbH, SC_SPS_1 module setup
+ *
+ * Copyright (C) 2012 Marek Vasut <[email protected]>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define	MUX_CONFIG_LED	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define	MUX_CONFIG_SSP0	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+	/* -- Strick 3 -- */
+
+	/* FEC Ethernet */
+	MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+
+	MX28_PAD_ENET0_TX_CLK__GPIO_4_5,	/* ENET INT */
+
+	MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
+
+	/* -- Strick 4 -- */
+
+	/* EMI */
+	MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
+
+	MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+
+	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
+
+	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+
+	MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
+	MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
+
+	/* -- Strick 5 -- */
+
+	/* MMC0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
+	MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
+	MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
+	MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
+	MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+
+	/* SPI2 (for flash) */
+	MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_SS0__SSP2_D3 |
+		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+
+	/* -- Strick 6 -- */
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL,
+	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* AUART0 */
+	MX28_PAD_AUART0_TX__AUART0_TX,
+	MX28_PAD_AUART0_RX__AUART0_RX,
+
+	/* MEGA interface */
+
+	/* Debug UART */
+	MX28_PAD_PWM0__DUART_RX,
+	MX28_PAD_PWM1__DUART_TX,
+
+	/* LED */
+	MX28_PAD_GPMI_D00__GPIO_0_0 | MUX_CONFIG_LED,
+	MX28_PAD_GPMI_D03__GPIO_0_3 | MUX_CONFIG_LED,
+	MX28_PAD_GPMI_D06__GPIO_0_6 | MUX_CONFIG_LED,
+};
+
+void board_init_ll(void)
+{
+	mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
+}
+
+void mx28_adjust_memory_params(uint32_t *dram_vals)
+{
+	dram_vals[0x74 >> 2] = 0x0f02010a;
+}

board/schulercontrol/sc_sps_1/u-boot.bd new file +4 -0

new file mode 100644
index 0000000..c60615a
@@ -0,0 +1,14 @@
+sources {
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
+}

board/schulercontrol/sc_sps_1/u-boot.bd line 14

Quoted 10 lines

board/schulercontrol/sc_sps_1/u-boot.bd new file +10 -0

+
+section (0) {
+	load u_boot_spl > 0x0000;
+	load ivt (entry = 0x0014) > 0x8000;
+	hab call 0x8000;
+
+	load u_boot > 0x40000100;
+	load ivt (entry = 0x40000100) > 0x8000;
+	hab call 0x8000;
+}

This is the fourth copy of the same file in u-boot. Do we have really no chance to share it among boards ?

Best regards,
Stefano Babic

Signature · 5 lines

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Marek Vasut

author

2012-08-05 10:14 UTC #4 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

Dear Stefano Babic,

[...]

Quoted 15 lines

Quoted 15 lines
(quoted diff) +0 -0
b/board/schulercontrol/sc_sps_1/u-boot.bd new file mode 100644 index 0000000..c60615a
board/schulercontrol/sc_sps_1/u-boot.bd new file +9 -0
@@ -0,0 +1,14 @@
+sources {
+	u_boot_spl="spl/u-boot-spl.bin";
+	u_boot="u-boot.bin";
+}
+
+section (0) {
+	load u_boot_spl > 0x0000;
+	load ivt (entry = 0x0014) > 0x8000;
+	hab call 0x8000;

Quoted 8 lines

board/schulercontrol/sc_sps_1/u-boot.bd line 14
Quoted 5 lines
board/schulercontrol/sc_sps_1/u-boot.bd new file +5 -0
+
+	load u_boot > 0x40000100;
+	load ivt (entry = 0x40000100) > 0x8000;
+	hab call 0x8000;
+}
This is the fourth copy of the same file in u-boot. Do we have really no chance to share it among boards ?

Given that we're coliding with Otavio with every single patch, do you prefer to apply this one and do a separate patch || move and repost?

Quoted 2 lines

Best regards,
Stefano Babic

Best regards,
Marek Vasut

Stefano Babic

2012-08-05 10:44 UTC #5 lore raw

PATCH 1/1 MX28: Add SchulerControl SC_SPS_1 platform

Quoted 2 lines · Marek Vasut

Dear Stefano Babic,

Hi Marek,

Quoted 5 lines

Quoted 2 lines
This is the fourth copy of the same file in u-boot. Do we have really no chance to share it among boards ?
Given that we're coliding with Otavio with every single patch, do you prefer to apply this one and do a separate patch || move and repost?

You have already sent patch to factorize u-boot.bd. I will apply it soon.

So please send V2 of this patch dropping u-boot.sb

Best regards,
Stefano Babic

Signature · 5 lines

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Marek Vasut

author

2012-08-05 10:37 UTC #6 lore raw

PATCH v2 1/1 MX28: Add SchulerControl SC_SPS_1 platform

In reply to Marek Vasut

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs

Signed-off-by Marek Vasut <[email protected]>

---
 board/schulercontrol/sc_sps_1/Makefile   |   47 +++++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c |  113 ++++++++++++++++
 board/schulercontrol/sc_sps_1/spl_boot.c |  165 ++++++++++++++++++++++++
 boards.cfg                               |    1 +
 include/configs/sc_sps_1.h               |  208 ++++++++++++++++++++++++++++++
 5 files changed, 534 insertions(+)
 create mode 100644 board/schulercontrol/sc_sps_1/Makefile
 create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
 create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
 create mode 100644 include/configs/sc_sps_1.h

V2: Removed u-boot.bd in favor of shared file

board/schulercontrol/sc_sps_1/Makefile new file +47 -0

new file mode 100644
index 0000000..24a1003
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2012
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+ifndef	CONFIG_SPL_BUILD
+COBJS	:= sc_sps_1.o
+else
+COBJS	:= spl_boot.o
+endif
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/schulercontrol/sc_sps_1/sc_sps_1.c new file +113 -0

113 lines not on this page · raw message

board/schulercontrol/sc_sps_1/spl_boot.c new file +165 -0

165 lines not on this page · raw message

boards.cfg +1 -0

index 5a31f6d..cc45641 100644
@@ -173,6 +173,7 @@ magnesium                    arm         arm926ejs   imx27lite           logicpd
 apx4devkit                   arm         arm926ejs   -                   bluegiga       mx28
 m28evk                       arm         arm926ejs   -                   denx           mx28
 mx28evk                      arm         arm926ejs   -                   freescale      mx28
+sc_sps_1                     arm         arm926ejs   -                   schulercontrol mx28
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
 omap5912osk                  arm         arm926ejs   -                   ti             omap

include/configs/sc_sps_1.h new file +208 -0

208 lines not on this page · raw message

Signature · 1 line

1.7.10.4

Stefano Babic

2012-08-07 09:45 UTC #7 lore raw

PATCH v2 1/1 MX28: Add SchulerControl SC_SPS_1 platform

Quoted 8 lines · Marek Vasut

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs
Signed-off-by Marek Vasut <[email protected]>

Quoted 12 lines

---
 board/schulercontrol/sc_sps_1/Makefile   |   47 +++++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c |  113 ++++++++++++++++
 board/schulercontrol/sc_sps_1/spl_boot.c |  165 ++++++++++++++++++++++++
 boards.cfg                               |    1 +
 include/configs/sc_sps_1.h               |  208 ++++++++++++++++++++++++++++++
 5 files changed, 534 insertions(+)
 create mode 100644 board/schulercontrol/sc_sps_1/Makefile
 create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
 create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
 create mode 100644 include/configs/sc_sps_1.h

You forget the MAINTAINER file

Stefano

Signature · 5 lines

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Marek Vasut

author

2012-08-07 10:01 UTC #8 lore raw

PATCH v3 1/1 MX28: Add SchulerControl SC_SPS_1 platform

In reply to Marek Vasut

This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs

Signed-off-by Marek Vasut <[email protected]>

---
 MAINTAINERS                              |    1 +
 board/schulercontrol/sc_sps_1/Makefile   |   47 +++++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c |  113 ++++++++++++++++
 board/schulercontrol/sc_sps_1/spl_boot.c |  165 ++++++++++++++++++++++++
 boards.cfg                               |    1 +
 include/configs/sc_sps_1.h               |  208 ++++++++++++++++++++++++++++++
 6 files changed, 535 insertions(+)
 create mode 100644 board/schulercontrol/sc_sps_1/Makefile
 create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
 create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
 create mode 100644 include/configs/sc_sps_1.h

V2: Removed u-boot.bd in favor of shared file
V3: Add missing maintainers entry

MAINTAINERS +1 -0

index 2bd22cc..7ef4451 100644
@@ -895,6 +895,7 @@ Marek Vasut <[email protected]>
 	vpac270		xscale/pxa
 	zipitz2		xscale/pxa
 	m28evk		i.MX28
+	sc_sps_1	i.MX28
  	efikamx		i.MX51
 	efikasb		i.MX51

board/schulercontrol/sc_sps_1/Makefile new file +47 -0

47 lines not on this page · raw message

board/schulercontrol/sc_sps_1/sc_sps_1.c new file +113 -0

113 lines not on this page · raw message

board/schulercontrol/sc_sps_1/spl_boot.c new file +165 -0

165 lines not on this page · raw message

boards.cfg +1 -0

index 5a31f6d..cc45641 100644
@@ -173,6 +173,7 @@ magnesium                    arm         arm926ejs   imx27lite           logicpd
 apx4devkit                   arm         arm926ejs   -                   bluegiga       mx28
 m28evk                       arm         arm926ejs   -                   denx           mx28
 mx28evk                      arm         arm926ejs   -                   freescale      mx28
+sc_sps_1                     arm         arm926ejs   -                   schulercontrol mx28
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
 omap5912osk                  arm         arm926ejs   -                   ti             omap

include/configs/sc_sps_1.h new file +208 -0

208 lines not on this page · raw message

Signature · 1 line

1.7.10.4