calao: use zImage on usb-a9263 and usb-a9g20 lpw
PATCH 1/1 calao: use zImage on usb-a9263 and usb-a9g20 lpw
The board boot more fast with a zImage than a uImage
as the kernel will not have to be relocated during the decompression.
--- configs/calao_usb_a9263_defconfig | 1 + configs/calao_usb_a9g20_lpw_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/calao_usb_a9263_defconfig +1 -0
@@ -12,3 +12,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=y
configs/calao_usb_a9g20_lpw_defconfig +1 -0
@@ -13,3 +13,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9g20" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9g20-lpw/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.7.10.4
PATCH 1/1 calao: use zImage on usb-a9263 and usb-a9g20 lpw
Gr?gory,
Since you are the person who added support for Calao USB-A9263 and Calao USB-A9G20-LPW, can you ACK the following patch if you're OK with it?
Thanks!
Thomas
Le Fri, 3 Aug 2012 16:10:28 +0200,
Jean-Christophe PLAGNIOL-VILLARD <[email protected]> a ?crit :
Quoted 27 lines
The board boot more fast with a zImage than a uImage
as the kernel will not have to be relocated during the decompression.Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- configs/calao_usb_a9263_defconfig | 1 + configs/calao_usb_a9g20_lpw_defconfig | 1 + 2 files changed, 2 insertions(+)configs/calao_usb_a9263_defconfig +1
-0@@ -12,3 +12,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=yconfigs/calao_usb_a9g20_lpw_defconfig +1
-0@@ -13,3 +13,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9g20" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9g20-lpw/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 calao: use zImage on usb-a9263 and usb-a9g20 lpw
Hi thomas,
I'm ok.
gregory
Quoted 43 lines · Thomas Petazzoni
Gr?gory,
Since you are the person who added support for Calao USB-A9263 and Calao USB-A9G20-LPW, can you ACK the following patch if you're OK with it?
Thanks!
Thomas
Le Fri, 3 Aug 2012 16:10:28 +0200,
Jean-Christophe PLAGNIOL-VILLARD <[email protected]> a ?crit :Quoted 27 lines
The board boot more fast with a zImage than a uImage
as the kernel will not have to be relocated during the decompression.Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- configs/calao_usb_a9263_defconfig | 1 + configs/calao_usb_a9g20_lpw_defconfig | 1 + 2 files changed, 2 insertions(+)configs/calao_usb_a9263_defconfig +1
-0@@ -12,3 +12,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=yconfigs/calao_usb_a9g20_lpw_defconfig +1
-0@@ -13,3 +13,4 @@ BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9g20" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9g20-lpw/linux-3.4.4.config" +BR2_LINUX_KERNEL_ZIMAGE=y
PATCH 1/1 calao: use zImage on usb-a9263 and usb-a9g20 lpw
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"J" == Jean-Christophe PLAGNIOL-VILLARD <[email protected]> writes:
J> The board boot more fast with a zImage than a uImage
J> as the kernel will not have to be relocated during the decompression.
J> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard