minor edits of cluster.rng (fixed head part)
cover minor edits of cluster.rng (fixed head part)
Jan Pokorn? (3):
cluster.rng: fix trailing whitespaces in head cluster.rng: fencedevice initial non-digit note to description cluster.rng: retab the head (use space uniformly)
config/tools/xml/cluster.rng.in.head | 41 ++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 20 deletions(-)
Signature · 1 line
1.7.11.2
PATCH 1/3 cluster.rng: fix trailing whitespaces in head
Signed-off-by Jan Pokorn? <[email protected]>
--- config/tools/xml/cluster.rng.in.head | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
config/tools/xml/cluster.rng.in.head +2 -2
@@ -72,7 +72,7 @@ To validate your cluster.conf against this schema, run: </optional> <optional> <attribute name="disallowed" rha:description="Set this to 1 enable - cman's Disallowed mode. This is usually only needed for + cman's Disallowed mode. This is usually only needed for backwards compatibility." rha:sample="1"> <data type="nonNegativeInteger"/> </attribute>
@@ -1068,7 +1068,7 @@ To validate your cluster.conf against this schema, run: </optional> <optional> - <attribute name="ttl" rha:description="The multicast TTL + <attribute name="ttl" rha:description="The multicast TTL to use on the second interface. cman(5)"/> </optional> </element>
Signature · 1 line
1.7.11.2
PATCH 2/3 cluster.rng: fencedevice initial non-digit note to description
In reply to Jan Pokorný(as an echo of rhbz#808441)
Signed-off-by Jan Pokorn? <[email protected]>
--- config/tools/xml/cluster.rng.in.head | 1 + 1 file changed, 1 insertion(+)
config/tools/xml/cluster.rng.in.head +1 -0
@@ -820,6 +820,7 @@ To validate your cluster.conf against this schema, run: <attribute name="name" rha:description="A name that is used to reference this fence device from clusternode fence section. + For XML validation purposes, it shall not start with a digit. fenced(8)"> <data type="ID"/> </attribute>
Signature · 1 line
1.7.11.2
PATCH 3/3 cluster.rng: retab the head (use space uniformly)
In reply to Jan PokornýSigned-off-by Jan Pokorn? <[email protected]>
--- config/tools/xml/cluster.rng.in.head | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
config/tools/xml/cluster.rng.in.head +18 -18
@@ -283,10 +283,10 @@ To validate your cluster.conf against this schema, run: chosen." rha:sample="active"/> </optional> <optional> - <attribute name="rrp_problem_count_threshold" - rha:description="This specifies the number of times a problem is detected - with a link before setting the link faulty. Once a link is set faulty, no - more data is transmitted upon it. Corosync default is 10, cman default is 3" + <attribute name="rrp_problem_count_threshold" rha:description="This + specifies the number of times a problem is detected with a link + before setting the link faulty. Once a link is set faulty, no more + data is transmitted upon it. Corosync default is 10, cman default is 3" rha:default="3" rha:sample="5"/> </optional> <optional>
@@ -434,36 +434,36 @@ To validate your cluster.conf against this schema, run: <!-- fence_daemon block --> <optional> <element name="fence_daemon" rha:description="Configuration for fenced - daemon. fenced(8)"> + daemon. fenced(8)"> <optional> <attribute name="post_join_delay" rha:description="Number of seconds - the daemon will wait before fencing any victims after a node joins - the fence domain. fenced(8)"/> + the daemon will wait before fencing any victims after a node joins + the fence domain. fenced(8)"/> </optional> <optional> <attribute name="post_fail_delay" rha:description="Number of seconds - the daemon will wait before fencing any victims after a node - fails. fenced(8)"/> + the daemon will wait before fencing any victims after a node + fails. fenced(8)"/> </optional> <optional> <attribute name="override_path" rha:description="Location of a FIFO - used for communication between fenced and fence_ack_manual. - fenced(8)"/> + used for communication between fenced and fence_ack_manual. + fenced(8)"/> </optional> <optional> <attribute name="override_time" rha:description="Number of seconds to - wait for a manual override after a failed fencing attempt before - the next attempt. fenced(8)"/> + wait for a manual override after a failed fencing attempt before + the next attempt. fenced(8)"/> </optional> <optional> <attribute name="clean_start" rha:description="Set to 1 to disable - startup fencing. fenced(8)"/> + startup fencing. fenced(8)"/> </optional> <optional> <attribute name="skip_undefined" rha:description="Set to 1 to disable - startup fencing of nodes with no fence methods defined. - fenced(8)"/> + startup fencing of nodes with no fence methods defined. + fenced(8)"/> </optional> </element> </optional>
@@ -482,12 +482,12 @@ To validate your cluster.conf against this schema, run: if domU recovery is expected to be automatic."> <optional> <attribute name="debug" rha:description="" > - <data type="integer"/> + <data type="integer"/> </attribute> </optional> <optional> <attribute name="port" rha:description="" > - <data type="integer"/> + <data type="integer"/> </attribute> </optional> <optional>
Signature · 1 line
1.7.11.2
cover minor edits of cluster.rng (fixed head part)
In reply to Jan PokornýACK all 3 of them.
please push them to STABLE32 branch.
Fabio
Quoted 9 lines · Jan Pokorn?
Jan Pokorn? (3):
cluster.rng: fix trailing whitespaces in head cluster.rng: fencedevice initial non-digit note to description cluster.rng: retab the head (use space uniformly)config/tools/xml/cluster.rng.in.head | 41 ++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 20 deletions(-)