Skip to contentSkip to conversation

firmware crash; Atheros QCA6174 doesn't work

DISCUSSION [email protected] 3 participants 3 messages Oct 31, 2017 – Nov 1, 2017 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hello,

I am trying to get wlan working but it doesn't work. So far I have tried:

1. tried to boot up Ubuntu based LiveCD neon-kde; wlp1s0 recognized but device doesn't work => dmesg message: failed to fetch board data board-2.bin

2. using latest firmware driver [git.kernel.org]; rmmod ath10k_pci ath10k_core ath; modprobe ath10k_pci => wlp1s0 gone; dmesg: firmware not found

3. I found an instruction for user made firmware:
a. I took the windows driver "qca61x4_2_2.bin"
b. downloaded dissect.py at https://gist.github.com/kazikcz/8e5845ad84ca251aa295
c. downloaded assemble.py https://gist.github.com/kazikcz/c970cbf3a863ebbc4495
d. python dissect.py <qca61x4_2_2.bin => extracted fw[1-4].bin
e. python assemble.py qca61x4_2_2_samsung_api_5 0 fw-2.bin fw-1.bin 0 >firmware-5.bin f. cp firmware-5.bin into /lib/firmware/ath10k/QCA6174/hw3.0/
g. using windows eeprom-file => cp eeprom_ar6320_3p0_SS_620.bin /lib/....../hw3.0/board.bin h. rmmod ath10k_pci ath10k_core ath; modprobe ath10k_pci

=> result: dmesg: firmware-5.bin loaded but "board-2.bin failed"

4. using a rolling release / installation iso archlinux-2017.10.01-x86_64.iso; doesn't work

5. ???? user made "board-2.bin"; but how?
6. ???? another kernel version?
7. ?????

Any Idea?

Thanks

### lspci ####

01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Samsung Electronics Co Ltd QCA6174 802.11ac Wireless Network Adapter [144d:c150]

### 1. dmesg firmware from Ubuntu ###

[   29.681877] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   29.683879] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   30.099561] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   30.099591] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[   30.099634] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[   30.099636] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[   30.474511] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150
[   30.474513] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[   30.475081] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[   30.882452] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c150 from ath10k/QCA6174/hw3.0/board-2.bin
[   31.029907] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
[   36.338958] ath10k_pci 0000:01:00.0: failed to ping firmware: -110
[   36.338962] ath10k_pci 0000:01:00.0: failed to reset rx filter: -110
[   36.419966] ath10k_pci 0000:01:00.0: could not init core (-110)
[   36.420010] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[  496.169451] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150
[  496.169454] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[  496.170458] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[  496.232870] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c150 from ath10k/QCA6174/hw3.0/board-2.bin
[  496.232893] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
[  498.349948] ath10k_pci 0000:01:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[  501.490918] ath10k_pci 0000:01:00.0: could not suspend target (-11)
[  501.572808] ath: EEPROM regdomain: 0x0
[  501.572811] ath: EEPROM indicates default country code should be used
[  501.572812] ath: doing EEPROM country->regdmn map search
[  501.572815] ath: country maps to regdmn code: 0x3a
[  501.572816] ath: Country alpha2 being used: US
[  501.572817] ath: Regpair used: 0x3a
[  501.596228] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0

### 2. dmesg with latest git drivers ath10k ###

[ 1001.544396] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 1001.820591] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 1001.820619] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 1001.820649] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 1001.820652] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[ 1001.820682] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-4.bin failed with error -2
[ 1001.820683] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-4.bin': -2
[ 1001.820717] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-3.bin failed with error -2
[ 1001.820719] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-3.bin': -2
[ 1001.820761] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-2.bin failed with error -2
[ 1001.820763] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-2.bin': -2
[ 1001.820765] ath10k_pci 0000:01:00.0: could not fetch firmware files (-2)
[ 1001.820767] ath10k_pci 0000:01:00.0: could not probe fw (-2)

### 3. dmesg user made firmware ####

[ 1772.091031] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 1772.369412] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150
[ 1772.369417] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 1772.370701] ath10k_pci 0000:01:00.0: firmware ver qca61x4_2_2_samsung_api_5 api 5 features  crc32 93d04d09
[ 1772.452929] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin
[ 1772.452942] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:0 crc32 ed5f849a
[ 1774.637315] ath10k_pci 0000:01:00.0: failed to parse service ready: -71
[ 1775.636379] ath10k_pci 0000:01:00.0: Unknown eventid: 118801
[ 1779.699043] ath10k_pci 0000:01:00.0: wmi service ready event not received
[ 1779.781704] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 1779.781850] ath10k_pci 0000:01:00.0: could not probe fw (-110)

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 33 lines

-----Original Message-----
From: ath10k [mailto:[email protected]] On Behalf Of [email protected]
Sent: Tuesday, October 31, 2017 10:09 AM
To: [email protected]
Subject: firmware crash; Atheros QCA6174 doesn't work

Hello,

I am trying to get wlan working but it doesn't work. So far I have tried:

1. tried to boot up Ubuntu based LiveCD neon-kde; wlp1s0 recognized but device doesn't work
=> dmesg message: failed to fetch board data board-2.bin

2. using latest firmware driver [git.kernel.org]; rmmod ath10k_pci ath10k_core ath; modprobe ath10k_pci
=> wlp1s0 gone; dmesg: firmware not found

3. I found an instruction for user made firmware:
a. I took the windows driver "qca61x4_2_2.bin"
b. downloaded dissect.py at
https://gist.github.com/kazikcz/8e5845ad84ca251aa295
c. downloaded assemble.py
https://gist.github.com/kazikcz/c970cbf3a863ebbc4495
d. python dissect.py <qca61x4_2_2.bin => extracted fw[1-4].bin e. python assemble.py qca61x4_2_2_samsung_api_5 0 fw-2.bin fw-1.bin 0

Quoted 1 line

firmware-5.bin

f. cp firmware-5.bin into /lib/firmware/ath10k/QCA6174/hw3.0/ g. using windows eeprom-file => cp eeprom_ar6320_3p0_SS_620.bin
/lib/....../hw3.0/board.bin
h. rmmod ath10k_pci ath10k_core ath; modprobe ath10k_pci

Quoted 9 lines

=> result: dmesg: firmware-5.bin loaded but "board-2.bin failed"

4. using a rolling release / installation iso archlinux-2017.10.01-x86_64.iso; doesn't work

5. ???? user made "board-2.bin"; but how?
6. ???? another kernel version?
7. ?????

Thanks you've done all the way, with a few of the suggestion I would recommend as well. The eeprom_ar6320_3p0_SS_620.bin is the right board file, and we've added to the board-2.bin.
https://github.com/kvalo/ath10k-firmware/commit/2db82b6981a52abc817abf5c070f9244717201a1

You might want to get this one and give it a try again.

Quoted 7 lines

### lspci ####

01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
Subsystem: Samsung Electronics Co Ltd QCA6174 802.11ac Wireless
Network Adapter [144d:c150]

As mentioned, and you've tested, the eeprom_ar6320_3p0_SS_620.bin is the right file to use. Latest board-2.bin should also have it as well.

Quoted 22 lines

### 1. dmesg firmware from Ubuntu ###

[   29.681877] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   29.683879] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode
0 reset_mode 0
[   30.099561] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-
cal-pci-0000:01:00.0.bin failed with error -2
[   30.099591] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-
pci-0000:01:00.0.bin failed with error -2
[   30.099634] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[   30.099636] ath10k_pci 0000:01:00.0: could not fetch firmware file
'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[   30.474511] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 144d:c150
[   30.474513] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs
0 testmode 0
[   30.475081] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-
QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32
75dee6c5
[   30.882452] ath10k_pci 0000:01:00.0: failed to fetch board data for
Quoted 2 lines

bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem- device=c150 from ath10k/QCA6174/hw3.0/board-2.bin

Ok, so this means the board-2.bin file you're using is not having the 144d:c150.

Quoted 2 lines
[   31.029907] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32

ed5f849a

And the debug board.bin file is not the right one for your module, so that it failed and unfortunately firmware failed to boot.

Quoted 13 lines
[   36.338958] ath10k_pci 0000:01:00.0: failed to ping firmware: -110
[   36.338962] ath10k_pci 0000:01:00.0: failed to reset rx filter: -110
[   36.419966] ath10k_pci 0000:01:00.0: could not init core (-110)
[   36.420010] ath10k_pci 0000:01:00.0: could not probe fw (-110)

### 2. dmesg with latest git drivers ath10k ###

[ 1001.544396] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0 [ 1001.820591] ath10k_pci 0000:01:00.0: Direct
firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 1001.820619] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-
Quoted 7 lines

pci-0000:01:00.0.bin failed with error -2 [ 1001.820649] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware- 5.bin failed with error -2 [ 1001.820652] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 1001.820682] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-4.bin failed with error -2 [ 1001.820683] ath10k_pci 0000:01:00.0: could not fetch firmware file

Likely the firmware file not found, so that the QCA6174 can't find it and fail to boot.

Quoted 11 lines

### 3. dmesg user made firmware ####

[ 1772.091031] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0 [ 1772.369412] ath10k_pci 0000:01:00.0: qca6174
hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150 [ 1772.369417]
ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 1772.370701] ath10k_pci 0000:01:00.0: firmware ver

qca61x4_2_2_samsung_api_5 api 5 features crc32 93d04d09 [ 1772.452929] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip- id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin [ 1772.452942]

Are you using the same driver you rebuild on #2? This all 0 seems to be like the same issue that has been fixed. Can you help to check the ath10k git you're using have this fix as well?
https://patchwork.kernel.org/patch/9486941/

Quoted 1 line

ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:0 crc32 ed5f849a

And again the default board.bin is failing again.

With the #1 or #2 scenario, can you give it a try with the latest firmware (4.4.1) and the board-2.bin file from here
https://github.com/kvalo/ath10k-firmware/tree/master/QCA6174/hw3.0

Ryan

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#2 lore raw
Quoted 12 lines · Ryan Hsu
Quoted 11 lines

### 3. dmesg user made firmware ####

[ 1772.091031] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0 [ 1772.369412] ath10k_pci 0000:01:00.0: qca6174
hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150 [ 1772.369417]
ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 1772.370701] ath10k_pci 0000:01:00.0: firmware ver

qca61x4_2_2_samsung_api_5 api 5 features crc32 93d04d09 [ 1772.452929] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip- id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin [ 1772.452942]

Quoted 4 lines

Are you using the same driver you rebuild on #2? This all 0 seems to be like the same issue that has been fixed.
Can you help to check the ath10k git you're using have this fix as well?
https://patchwork.kernel.org/patch/9486941/

That patch should be in v4.11-rc1 and all releases after that.

d2e202c06ca4 ath10k: ignore configuring the incorrect board_id

Signature · 5 lines
Kalle Valo
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k