Skip to contentSkip to conversation

mx6qarm2:Use IMX_GPIO_NR macro

PATCH New Ashok 3 participants 3 messages Aug 23, 2012

lore
Share & tools
lore

Ashok

author
#0 lore raw

PATCH 1/1 mx6qarm2:Use IMX_GPIO_NR macro

From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <[email protected]>
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro

Signed-off-by Ashok Kumar Reddy <[email protected]>
---
  board/freescale/mx6qarm2/mx6qarm2.c |    4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/board/freescale/mx6qarm2/mx6qarm2.c
index 340c4c4..3218993 100644

board/freescale/mx6qarm2/mx6qarm2.c +2 -2
@@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc)
  	int ret;
 
  	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-		gpio_direction_input(171); /*GPIO6_11*/
-		ret = !gpio_get_value(171);
+		gpio_direction_input(IMX_GPIO_NR(6,11));
+		ret = !gpio_get_value(IMX_GPIO_NR(6,11));
  	} else /* Don't have the CD GPIO pin on board */
  		ret = 1;
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 1/1 mx6qarm2:Use IMX_GPIO_NR macro

In reply to Ashok
Quoted 16 lines · Ashok

From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <[email protected]>
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro

Signed-off-by Ashok Kumar Reddy <[email protected]>
---
 board/freescale/mx6qarm2/mx6qarm2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
board/freescale/mx6qarm2/mx6qarm2.c +0 -0
index 340c4c4..3218993 100644

board/freescale/mx6qarm2/mx6qarm2.c int board_mmc_getcd(struct mmc *mmc) · line 133

Quoted 10 lines
board/freescale/mx6qarm2/mx6qarm2.c +2 -2
@@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc)
     int ret;
 
     if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-        gpio_direction_input(171); /*GPIO6_11*/
-        ret = !gpio_get_value(171);
+        gpio_direction_input(IMX_GPIO_NR(6,11));
+        ret = !gpio_get_value(IMX_GPIO_NR(6,11));
     } else /* Don't have the CD GPIO pin on board */
         ret = 1;
Acked-by Stefano Babic <[email protected]>

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================