Buildproblems while running make
Hello,
I'm successful setting up BR for building a ARM cross compiler with CT-NG. Now I've added a project specific kernelconfig for 2.6.39.4 and started a build process.
The whole cross compiler part is working without problems, so after this some tools should be builded. But the build failed with an error message about aclocal could not be found.
This confuses me a little bit, because some lines above is to see that automake1.11 was successful builded. Here is the relevant output.
Quoted 22 lines
make[3]: F?r das Ziel ?install-exec-am? ist nichts zu tun.
/bin/mkdir-p '/home/carsten/gitprojects/buildroot/output/target/usr/share/aclocal-1.11'
/usr/bin/install-c -m 644 ../m4/amversion.m4 ar-lib.m4 as.m4 auxdir.m4 ccstdc.m4 cond.m4 cond-if.m4 depend.m4 depout.m4 dmalloc.m4 gcj.m4 header.m4 init.m4 install-sh.m4 lead-dot.m4 lex.m4 lispdir.m4 maintainer.m4 make.m4 minuso.m4 missing.m4 mkdirp.m4 multi.m4 obsol-gt.m4 obsol-lt.m4 obsolete.m4 options.m4 protos.m4 python.m4 regex.m4 runlog.m4 sanity.m4 silent.m4 strip.m4 substnot.m4 tar.m4 upc.m4 vala.m4 '/home/carsten/gitprojects/buildroot/output/target/usr/share/aclocal-1.11'
make[3]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/m4'
make[2]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/m4'
Making install in tests
make[2]: Entering directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[3]: Entering directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[3]: F?r das Ziel ?install-exec-am? ist nichts zu tun.
make[3]: F?r das Ziel ?install-data-am? ist nichts zu tun.
make[3]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[2]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[1]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5'
mkdir -p/home/carsten/gitprojects/buildroot/output/target/etc
echo "buildroot" >/home/carsten/gitprojects/buildroot/output/target/etc/hostname/bin/sed -i -e '$a \127.0.1.1\tbuildroot' \ -e '/^127.0.1.1/d' /home/carsten/gitprojects/buildroot/output/target/etc/hostsmkdir -p
/home/carsten/gitprojects/buildroot/output/target/etc
echo "Welcome to Buildroot" >/home/carsten/gitprojects/buildroot/output/target/etc/issue/bin/sed-i -e '/# GENERIC_SERIAL$/s~^.*#~ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' \
/home/carsten/gitprojects/buildroot/output/target/etc/inittab/bin/sed-i -e '/^#.*# REMOUNT_ROOTFS_RW$/s~^#\+~~'/home/carsten/gitprojects/buildroot/output/target/etc/inittab
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
host-module-init-tools 3.15 Autoreconfiguring
aclocal: couldn't open directory '
/home/carsten/gitprojects/buildroot/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/share/aclocal': Datei oder Verzeichnis nicht gefunden
autoreconf:/home/carsten/gitprojects/buildroot/output/host/usr/bin/aclocalfailed with exit status: 1
make: *** [/home/carsten/gitprojects/buildroot/output/build/host-module-init-tools-3.15/.stamp_configured] Fehler 1
Did I something misconfigured or misunderstood?
Can someone point me to the correct direction? If there some config files needed just let me know.
And one more question, if I rerun make (without changes to BR) the complete cross compiler will be rebuilded, why this happen?
Thanks in advice,
Carsten
Hello,
after some days and new trys it works.
I think that something (old) in the output/ directory has produced this behavior.
After a start from scratch and recopy my configs buildroot just works fine! Now I have to do more finetuning.
Thanks for this shiny FOSS!
Regards
Carsten
Am 24.08.2012 23:02, schrieb Carsten Schoenert:
Quoted 47 lines
Hello,
I'm successful setting up BR for building a ARM cross compiler with CT-NG. Now I've added a project specific kernelconfig for 2.6.39.4 and started a build process.
The whole cross compiler part is working without problems, so after this some tools should be builded. But the build failed with an error message about aclocal could not be found.
This confuses me a little bit, because some lines above is to see that automake1.11 was successful builded. Here is the relevant output.Quoted 22 lines
make[3]: F?r das Ziel ?install-exec-am? ist nichts zu tun.
/bin/mkdir-p '/home/carsten/gitprojects/buildroot/output/target/usr/share/aclocal-1.11'
/usr/bin/install-c -m 644 ../m4/amversion.m4 ar-lib.m4 as.m4 auxdir.m4 ccstdc.m4 cond.m4 cond-if.m4 depend.m4 depout.m4 dmalloc.m4 gcj.m4 header.m4 init.m4 install-sh.m4 lead-dot.m4 lex.m4 lispdir.m4 maintainer.m4 make.m4 minuso.m4 missing.m4 mkdirp.m4 multi.m4 obsol-gt.m4 obsol-lt.m4 obsolete.m4 options.m4 protos.m4 python.m4 regex.m4 runlog.m4 sanity.m4 silent.m4 strip.m4 substnot.m4 tar.m4 upc.m4 vala.m4 '/home/carsten/gitprojects/buildroot/output/target/usr/share/aclocal-1.11'
make[3]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/m4'
make[2]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/m4'
Making install in tests
make[2]: Entering directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[3]: Entering directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[3]: F?r das Ziel ?install-exec-am? ist nichts zu tun.
make[3]: F?r das Ziel ?install-data-am? ist nichts zu tun.
make[3]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[2]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5/tests'
make[1]: Leaving directory `/home/carsten/gitprojects/buildroot/output/build/automake-1.11.5'
mkdir -p/home/carsten/gitprojects/buildroot/output/target/etc
echo "buildroot" >/home/carsten/gitprojects/buildroot/output/target/etc/hostname/bin/sed -i -e '$a \127.0.1.1\tbuildroot' \ -e '/^127.0.1.1/d' /home/carsten/gitprojects/buildroot/output/target/etc/hostsmkdir -p
/home/carsten/gitprojects/buildroot/output/target/etc
echo "Welcome to Buildroot" >/home/carsten/gitprojects/buildroot/output/target/etc/issue/bin/sed-i -e '/# GENERIC_SERIAL$/s~^.*#~ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' \
/home/carsten/gitprojects/buildroot/output/target/etc/inittab/bin/sed-i -e '/^#.*# REMOUNT_ROOTFS_RW$/s~^#\+~~'/home/carsten/gitprojects/buildroot/output/target/etc/inittabQuoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
host-module-init-tools 3.15 Autoreconfiguring
aclocal: couldn't open directory '
/home/carsten/gitprojects/buildroot/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/share/aclocal': Datei oder Verzeichnis nicht gefunden
autoreconf:/home/carsten/gitprojects/buildroot/output/host/usr/bin/aclocalfailed with exit status: 1
make: *** [/home/carsten/gitprojects/buildroot/output/build/host-module-init-tools-3.15/.stamp_configured] Fehler 1Did I something misconfigured or misunderstood?
Can someone point me to the correct direction? If there some config files needed just let me know.And one more question, if I rerun make (without changes to BR) the complete cross compiler will be rebuilded, why this happen?
Thanks in advice,
Carsten