NAND Flash SMC timings update (nwe_pulse) for calao board based on AT91SAM9G20 SoC
PATCH 1/1 NAND Flash SMC timings update (nwe_pulse) for calao board based on AT91SAM9G20 SoC
--- arch/arm/boards/tny-a926x/init.c | 2 +- arch/arm/boards/usb-a926x/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boards/tny-a926x/init.c +1 -1
@@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,
arch/arm/boards/usb-a926x/init.c +1 -1
@@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,
Signature · 8 lines
1.5.6.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 1 line · gregory hermant
Signed-off-by Gregory Hermant <[email protected]>
The commmit log is a bit sparse. It would be interesting if this is an enhancement, fixes a problem, is needed on newer board revisions...
Sascha
Quoted 41 lines
--- arch/arm/boards/tny-a926x/init.c | 2 +- arch/arm/boards/usb-a926x/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boards/tny-a926x/init.c +1
-1@@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,arch/arm/boards/usb-a926x/init.c +1
-1@@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,Signature · 8 lines
1.5.6.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hello sascha,
It's just a typo.
gregory
Quoted 44 lines · Sascha Hauer
Quoted 1 line · gregory hermant
Signed-off-by Gregory Hermant <[email protected]>The commmit log is a bit sparse. It would be interesting if this is an enhancement, fixes a problem, is needed on newer board revisions...
Sascha
Quoted 36 lines
--- arch/arm/boards/tny-a926x/init.c | 2 +- arch/arm/boards/usb-a926x/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boards/tny-a926x/init.c +1
-1@@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,arch/arm/boards/usb-a926x/init.c +1
-1@@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,Signature · 1 line
1.5.6.3
Quoted 6 lines
Quoted 5 lines
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 3 lines · gregory hermant
Hello sascha,
It's just a typo.
gregory
Applied now, thanks
Sascha
Quoted 53 lines
Quoted 50 lines · Sascha Hauer
Quoted 1 line · gregory hermant
Signed-off-by Gregory Hermant <[email protected]>The commmit log is a bit sparse. It would be interesting if this is an enhancement, fixes a problem, is needed on newer board revisions...
Sascha
Quoted 41 lines
--- arch/arm/boards/tny-a926x/init.c | 2 +- arch/arm/boards/usb-a926x/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boards/tny-a926x/init.c +1
-1@@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,arch/arm/boards/usb-a926x/init.c +1
-1@@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = { .ncs_read_pulse = 4, .nrd_pulse = 4, .ncs_write_pulse = 4, - .nwe_pulse = 2, + .nwe_pulse = 4, .read_cycle = 7, .write_cycle = 7,Signature · 8 lines
1.5.6.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox