avr32: at32ap700x: set DMA slave properties for MCI dw_dmac
PATCH v3 3/3 avr32: at32ap700x: set DMA slave properties for MCI dw_dmac
The MCI makes use of the dw_dmac driver when DMA is being used. Due to recent changes to dw_dmac the MCI+DMA driver was broken because:
- a patch in dw_dmac allowed for 64-bit transfers on the memory side, giving an illegal value of 3 in the SRC/DST_TR_WIDTH register
(http://lkml.org/lkml/2012/1/18/52)
- the SMS field in the CTLL register received the wrong value 0
This patch sets the SMS (Source Master Select) to 1 and limits the maximum transfer width to 32 bits.
Note: this can only be applied after the previous:
[PATCH v3 2/3] dw_dmac: max_mem_width limits value for SRC/DST_TR_WID register
Signed-off-by Hein Tibosch <[email protected]>
--- arch/avr32/mach-at32ap/at32ap700x.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
arch/avr32/mach-at32ap/at32ap700x.c +5 -0
@@ -1356,6 +1356,11 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL |DWC_CFGL_HS_SRC_POL ); +/* Setup DMA controller: let source be master */ + slave->sdata.src_master =1 ; +/* Limit maximum transfer width to 32-bit */ + slave->sdata.max_mem_width =DW_MEM_WIDTH_32 ; + data->dma_slave = slave; if (platform_device_add_data(pdev, data,
Signature · 1 line
1.7.8.0