gspca_pac7302 driver broken ?

Hi,

can anyone who owns such a device confirm that the gspca_pac7302 driver (kernel 3.6.0-rc1+) is fine ?

Today I stumbled over a webcam which we do not support yet. The Windows driver of this device is called pac7302.sys, so I added it's USB-ID to the gspca-driver but couldn't get the device working.
When I started capturing, the LED turned on for about a second and then off again. No frames are received. There were no error messages.

I didn't have enough time for looking into this deeper today, but I think I could borrow this device again in a few days.

Regards,
Frank Schäfer

Hi Frank,

It's working here with latest media-tree kernel.

Driver Info:

	Driver name   : gspca_pac7302
	Card type     : USB Camera (093a:2625)
	Bus info      : usb-0000:00:12.0-1
	Driver version: 3.6.0
	Capabilities  : 0x85000001
		Video Capture
		Read/Write
		Streaming
		Device Capabilities
	Device Caps   : 0x05000001
		Video Capture
		Read/Write
		Streaming

Hope this helps,
Ezequiel.

Am 02.09.2012 22:08, schrieb Ezequiel Garcia:

Ok, thank you for testing.
Then this device must be somehow different. :(
The driver seems to be "straight-forward", it basically writes static sequences to registers and doesn't check things like chip ids etc. So I guess it's time again for USB-sniffing...

Regards,
Frank