Skip to contentSkip to conversation

eb_cpux9k2: add ram target configuration

PATCH New Jens Scharsig 3 participants 6 messages Apr 29, 2012 – Sep 4, 2012

lore
Share & tools
lore

Jens Scharsig

author
#0 lore raw

PATCH 1/1 eb_cpux9k2: add ram target configuration

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)

Signed-off-by Jens Scharsig <[email protected]>
---
 boards.cfg                   |    3 ++-
 include/configs/eb_cpux9k2.h |    5 +++++
 2 files changed, 7 insertions(+), 1 deletions(-)
boards.cfg +2 -1
index 3cf75c3..efca4fc 100644
@@ -54,7 +54,8 @@ integratorcp_cm920t          arm         arm920t     integrator          armltd
 a320evb                      arm         arm920t     -                   faraday        a320
 at91rm9200ek                 arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek
 at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek:RAMBOOT
-eb_cpux9k2                   arm         arm920t     -                   BuS            at91
+eb_cpux9k2                   arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2
+eb_cpux9k2_ram               arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2:RAMBOOT
 cpuat91                      arm         arm920t     cpuat91             eukrea         at91        cpuat91
 cpuat91_ram                  arm         arm920t     cpuat91             eukrea         at91        cpuat91:RAMBOOT
 mx1ads                       arm         arm920t     -                   -              imx
include/configs/eb_cpux9k2.h +5 -0
index eb05e2a..d7b6b57 100644
@@ -44,7 +44,12 @@
 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
 /*--------------------------------------------------------------------------*/
+#ifndef CONFIG_RAMBOOT
 #define CONFIG_SYS_TEXT_BASE 		0x00000000
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 		0x21f00000
+#endif
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
 #define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
Signature · 1 line
1.7.7
#1 lore raw

PATCH 1/1 eb_cpux9k2: add ram target configuration

Dear Andreas Bie?mann,

Please could you also apply this open patch.
I've just tested this against the current atmel and master tree.

Thanks

best regards

Jens Scharsig

Am 2012-04-29 20:01, schrieb Jens Scharsig:

Quoted 40 lines

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)

Signed-off-by Jens Scharsig <[email protected]>
---
 boards.cfg                   |    3 ++-
 include/configs/eb_cpux9k2.h |    5 +++++
 2 files changed, 7 insertions(+), 1 deletions(-)
boards.cfg +2 -1
index 3cf75c3..efca4fc 100644
@@ -54,7 +54,8 @@ integratorcp_cm920t          arm         arm920t     integrator          armltd
 a320evb                      arm         arm920t     -                   faraday        a320
 at91rm9200ek                 arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek
 at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek:RAMBOOT
-eb_cpux9k2                   arm         arm920t     -                   BuS            at91
+eb_cpux9k2                   arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2
+eb_cpux9k2_ram               arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2:RAMBOOT
 cpuat91                      arm         arm920t     cpuat91             eukrea         at91        cpuat91
 cpuat91_ram                  arm         arm920t     cpuat91             eukrea         at91        cpuat91:RAMBOOT
 mx1ads                       arm         arm920t     -                   -              imx
include/configs/eb_cpux9k2.h +5 -0
index eb05e2a..d7b6b57 100644
@@ -44,7 +44,12 @@
 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
 /*--------------------------------------------------------------------------*/
+#ifndef CONFIG_RAMBOOT
 #define CONFIG_SYS_TEXT_BASE 		0x00000000
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 		0x21f00000
+#endif
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
 #define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
#2 lore raw

PATCH 1/1 eb_cpux9k2: add ram target configuration

Dear Jens Scharsig,

Quoted 3 lines · Jens Scharsig

Dear Andreas Bie?mann,

Please could you also apply this open patch.

sorry, this one slipped through. Please add some at91/atmel to the subject line next time to get my attention.

Quoted 1 line

I've just tested this against the current atmel and master tree.

Ok, but this one seems to have style problems, please fix.

---8<---
WARNING: please, no space before tabs
#47: FILE: include/configs/eb_cpux9k2.h:51:
+#define CONFIG_SYS_TEXT_BASE ^I^I0x21f00000$

total: 0 errors, 1 warnings, 21 lines checked

NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE

U-Boot-eb_cpux9k2-add-ram-target-configuration.patch has style problems, please review.
--->8---

Best regards

Andreas Bie?mann

#3 lore raw

PATCH 1/1 eb_cpux9k2: add ram target configuration

Dear Andreas Bie?mann,

Quoted 5 lines
Quoted 2 lines

Please could you also apply this open patch.

sorry, this one slipped through. Please add some at91/atmel to the subject line next time to get my attention.

Blame it on myself. I forgot the arch comment in subject

Best regards

Jens Scharsig

#4 lore raw

PATCH v2 1/1 atmel: eb_cpux9k2: add ram target configuration

In reply to Jens Scharsig

From: Jens Scharsig <[email protected]>

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)

Signed-off-by Jens Scharsig <[email protected]>
Signed-off-by Jens Scharsig (BuS Elektronik) <[email protected]>

---
fix code styling

 boards.cfg                   |    3 ++-
 include/configs/eb_cpux9k2.h |    7 ++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)
boards.cfg +2 -1
index 72e7803..613d6b2 100644
@@ -60,7 +60,8 @@ integratorcp_cm920t          arm         arm920t     integrator          armltd
 a320evb                      arm         arm920t     -                   faraday        a320
 at91rm9200ek                 arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek
 at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek:RAMBOOT
-eb_cpux9k2                   arm         arm920t     -                   BuS            at91
+eb_cpux9k2                   arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2
+eb_cpux9k2_ram               arm         arm920t     eb_cpux9k2          BuS            at91        eb_cpux9k2:RAMBOOT
 cpuat91                      arm         arm920t     cpuat91             eukrea         at91        cpuat91
 cpuat91_ram                  arm         arm920t     cpuat91             eukrea         at91        cpuat91:RAMBOOT
 mx1ads                       arm         arm920t     -                   -              imx
include/configs/eb_cpux9k2.h +6 -1
index d4104de..9371ec3 100644
@@ -44,7 +44,12 @@
 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
 /*--------------------------------------------------------------------------*/
-#define CONFIG_SYS_TEXT_BASE 		0x00000000
+#ifndef CONFIG_RAMBOOT
+#define CONFIG_SYS_TEXT_BASE		0x00000000
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE		0x21f00000
+#endif
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
 #define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
Signature · 1 line
1.7.3.4