ARM: configs: update lpc18xx defconfig
Subsystems (2)
PATCH 1/1 ARM: configs: update lpc18xx defconfig
- Enable SPIFI Flash and JFFS2 to support rootfs on Flash memory
- Enable USB Phy, mass storage and SCSI to support USB memory
- Enable PCF857x and JC42 I2C devices found on Hitex board
- Enable PL172 to support memory mapped NOR Flash
- New LPC18xx drivers: I2C, Watchdog, SCT PWM and RTC
---
Hi arm-soc team,
Please apply this single defconfig update for lpc18xx to arm-soc/defconfig for v4.4.
arch/arm/configs/lpc18xx_defconfig | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)
arch/arm/configs/lpc18xx_defconfig +22 -4
@@ -52,15 +52,22 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_SPI_NXP_SPIFI=y CONFIG_BLK_DEV_RAM=y CONFIG_SRAM=y CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set
@@ -102,14 +109,17 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y +CONFIG_I2C_LPC2K=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_74XX_MMIO=y +CONFIG_GPIO_PCF857X=y +CONFIG_SENSORS_JC42=y CONFIG_SENSORS_LM75=y CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -CONFIG_MFD_SYSCON=y +CONFIG_LPC18XX_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y
@@ -117,6 +127,8 @@ CONFIG_FB_ARMCLCD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y
@@ -128,12 +140,20 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_LPC24XX=y CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y +CONFIG_LPC18XX_DMAMUX=y +CONFIG_MEMORY=y +CONFIG_ARM_PL172_MPMC=y +CONFIG_PWM=y +CONFIG_PWM_LPC18XX_SCT=y +CONFIG_PHY_LPC18XX_USB_OTG=y CONFIG_EXT2_FS=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set +CONFIG_JFFS2_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y
@@ -143,8 +163,6 @@ CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_INFO is not set -# CONFIG_FTRACE is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRC_ITU_T=y
Signature · 1 line
1.8.0
PATCH 1/1 MAINTAINERS: update lpc18xx entry with more drivers
Add explicit entries for drivers used by the lpc18xx that is not caught by the "lpc18xx" regex pattern.
---
Hi arm-soc team,
Please apply this update to MAINTAINERS for lpc18xx.
MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
@@ -1224,6 +1224,13 @@ ARM/LPC18XX ARCHITECTURE M: Joachim Eastwood <[email protected]> L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) S: Maintained +F: arch/arm/boot/dts/lpc43* +F: drivers/clk/nxp/clk-lpc18xx* +F: drivers/clocksource/time-lpc32xx.c +F: drivers/i2c/busses/i2c-lpc2k.c +F: drivers/memory/pl172.c +F: drivers/mtd/spi-nor/nxp-spifi.c +F: drivers/rtc/rtc-lpc24xx.c N: lpc18xx ARM/MAGICIAN MACHINE SUPPORT
Signature · 1 line
1.8.0
Arnd Bergmann
AppliedPATCH 1/1 MAINTAINERS: update lpc18xx entry with more drivers
Quoted 9 lines · On Sunday 11 October 2015 22:40:42 Joachim Eastwood wrote:
Add explicit entries for drivers used by the lpc18xx that is not caught by the "lpc18xx" regex pattern.
Signed-off-by Joachim Eastwood <[email protected]>---
Hi arm-soc team,Please apply this update to
MAINTAINERSfor lpc18xx.
Applied to next/fixes-non-critical, thanks!
Arnd
Arnd Bergmann
AppliedPATCH 1/1 ARM: configs: update lpc18xx defconfig
In reply to Joachim EastwoodQuoted 6 lines · On Sunday 11 October 2015 22:40:41 Joachim Eastwood wrote:
- Enable SPIFI Flash and JFFS2 to support rootfs on Flash memory
- Enable USB Phy, mass storage and SCSI to support USB memory
- Enable PCF857x and JC42 I2C devices found on Hitex board
- Enable PL172 to support memory mapped NOR Flash
- New LPC18xx drivers: I2C, Watchdog, SCT PWM and RTC
Quoted 7 lines
Signed-off-by Joachim Eastwood <[email protected]>---
Hi arm-soc team,Please apply this single defconfig update for lpc18xx to arm-soc/defconfig for v4.4.
Applied to next/defconfig, thanks!
Arnd